References
- Verhoeven, J. D. “Fundamentals of physical metallurgy”, John Wiley & Sons Incorporated, 1975.
- Verhoeven, J. D. “Metallurgy of steel for bladesmiths & others who heat treat and forge steel”, Iowa State University, pp. 66 – 68, 2005.
- George E. D., Kuhn, A. K., Lee Semiatin, S. “Handbook of workability and process design”, ASM international, 2003.
- “Thomasnet” Available online: https://www.thomasnet.com/ (accessed on 6 March 2023).
- “The Swedish company Fällkniven”, Available online: https://fallkniven.se/en/product-information/steel/ (accessed on 1 March 2023).
- “Die Böker Messer-Manufaktur”, Available online: https://www.boker.de/ (accessed on 6 March 2023).
- “Technical Data”, Available online: https://www.worldironsteel.com/ (accessed on 2 March 2023).
- Berrahou, M., Kaoula. A. “Experimental and numerical study on the efficiency of the repair of composite structures cracked and v-notched by different types and shapes of composite material patch”, Strojnícky časopis – Journal of Mechanical Engineering 72 (1), pp. 1 – 14, 2022. DOI: 10.2478/scjme-2022-0001
- Keerthana, B., Kumar, G. V., Babu, K. A. “Effect of minimum quantity lubrication on surface roughness and temperature in milling of EN31 steel for die making”, Strojnícky časopis – Journal of Mechanical Engineering 69(1), pp. 61 – 68, 2019. DOI: 10.2478/scjme-2019-0005
- “Cold Steel San Mai Tanto Series Fixed Blade Knife”, Available online: https://www.amazon.com/Steel-Tanto-Fixed-Blade-Knife/dp/B07CCWDP4K?th=1 (accessed on 2 March 2023).
- Bruçi, M. “Theory of Metal Forming”, University of Prishtina “Hasan Prishtina”, Faculty of Mechanical Engineering, Pristina, 2020.
- “Martensitic stainless steel”, Available online: http://www.steelnumber.com. (accessed on 2 March 2023).
- Pöhlandt, K. “Materials Testing for the Metal Forming Industry”, Springer- Verlag Berlin Heidelberg, 1989.
- Pöhlandt, K. “Materials testing for the metal forming industry”, Springer Science & Business Media, 2012. DOI: 10.1007/978-3-642-50241-5
- Kurt, L. “Handbook of metal forming”, McGraw-Hill Book Company, 1985. ISBN 0-07-036285-8
- Nielsen, Ch., Martins, P. “Metal Forming Formability, Simulation, and Tool Design”, ISBN: 9780323852562, 1st Edition - February 12, 2021.
- Landgraf, P., Birnbaum, P., Meza-García, E., Grund, T., Kräusel, V., Lampke, T. “Jominy End Quench Test of Martensitic Stainless Steel X30Cr13”, Metals 2021 11(7), 1071, 2021. DOI: 10.3390/met11071071
- Günter, S., Kühn, K.-D., Hoffmeister H.-W. “Fertigungstechnik”, Springer-Verlag, 2007.
- Ambrogio, G., Filice, L., Gagliardi, F. “Formability of lightweight alloys by hot incremental sheet forming”, Materials & Design 34, pp. 501 – 508, 2012.
- Zhang, R., Shao, Z., Lin, J. “A review on modelling techniques for formability prediction of sheet metal forming”, International Journal of Lightweight Materials and Manufacture 1(3), pp. 115 – 125, 2018.
- Jančo, R. “Stress Analysis of Pressing Joint of Two Conical Pipes”, Strojnícky časopis – Journal of Mechanical Engineering 73(1), pp. 117 – 124, 2023. DOI: 10.2478/scjme-2023-0009