References
- Hopkinson, B. “X. A method of measuring the pressure produced in the detonation of high, explosives or by the impact of bullets”, Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character 213, pp. 437 – 456, 1914. DOI: 10.1098/rsta.1914.0010
- Kolsky, H. “An Investigation of the Mechanical Properties of Materials at Very High Rates of Loading”, Proceedings of the Physical Society. Section B, 62, pp. 676 – 700, 1949. DOI: 10.1088/0370-1301/62/11/302
- Kuhn, H, Medlin, D., ed. “ASM Handbook: Volume 08 – Mechanical Testing and Evaluation”, 10. ASM International, 2000. ISBN 978-0-87170-389-7
- Mánek, M., Fusek, M. “Measurement of mechanical properties of aluminum alloy in high strain rate”, In: Applied Mechanics, Piešťany, Slovakia, pp. 75 – 78, 2023.
- R. W. Schafer, “What Is a Savitzky-Golay Filter? [Lecture Notes],” in IEEE Signal Processing Magazine 28 (4), pp. 111 – 117, 2011. DOI: 10.1109/MSP.2011.941097
- Bělík, R. “Numerical Modeling of Impact Processes: Doctoral thesis”, Ostrava: VŠB – Technical university of Ostrava, Faculty of Mechanical Engineering, Department of Applied Mechanics, 2020, p. 171. Tutor: doc. Ing. Martin Fusek, Ph.D.
- Johnson, G. R., Cook, W. H. “A Constitutive Model and Data for Metals Subjected to Large Strains, High Strain Rates, and High Temperatures”, Proceedings 7th International Symposium on Ballistics, The Hague, 19-21 April 1983, pp. 541 – 547, 1983.
- Ansys Explicit Dynamics Analysis Guide. Southpointe, July 2022.
- Bałon, P., & Rejman, E., Smusz, R., Szostak, J., Kiełbasa, B. “Implementation of high speed machining in thin-walled aircraft integral elements”, Open Engineering 8 (1), pp. 162 – 169, 2018. DOI: 10.1515/eng-2018-0021
- Rybansky, D., Sotola, M., Marsalek, P., Poruba, Z., Fusek, M. “Study of Optimal Cam Design of Dual-Axle Spring-Loaded Camming Device”, Materials 2021, 14 (8), 1940, 2021. DOI: 10.3390/ma14081940
- Čech, R., Horyl, P., Maršálek, P. “Modelling of Two-Seat Connection to the Frame of Rail Wagon in Terms of Resistance at Impact Test”, Strojnícky časopis – Journal of Mechanical Engineering 66 (2), pp. 101 – 106, 2016. DOI: 10.1515/scjme-2016-0024
- Bělík, R., Fusek, M. “Dynamic Properties of 316L Identified by Split Hopkinson Pressure Bar”, In: 58th International Conference on Experimental Stress Analysis – EAN2020, October 19–22, 2020, online, Czech Republic. Ostrava: Vysoká škola báňská - Technická univerzita Ostrava, 2022. pp. 1 – 4, 2022. ISBN 978-80-248-4451-0