References
- Isaac, M. D., Ori, I. “Engineering Mechanics of Composite materials“, Oxford University Press, Inc., New York, 2007. ISBN 978-0195150971.
- Pandya, B. N., Kant, T. “Finite element analysis of laminated composite plates using a higher-order displacement model“, Composite Science and Technology 32(2), pp. 137 – 155, 1988.
- Kam, T.Y., Lin, S.C., Hsiao, K.M. “Reliability analysis of nonlinear laminated composite plate structures“, Composite Structure 25(1–4), pp. 503 – 510, 1993.
- Han, W., Petyt, M., Hsiao, K.-M. “Investigation into geometrically nonlinear analysis of rectangular laminated plates using the hierarchical finite element method“, Finite Element Analysis Des, 18(1–3), pp. 273 – 288, 1994.
- Sridhar, C., Rao, K.P. “Large deformation finite element analysis of laminated circular composite plates“, Computers and structures 54(1), pp. 59 – 64, 1995.
- Ganapathi, M., Polit, O., Touratier, M.“C0 eight-node membrane shear- bending element for geometrically non-linear (static and dynamic) analysis of laminates“, Int. Journal for Numerical Methods in Engineering 39(20), pp. 3453 – 74, 1996.
- Bao, G., Jiang, W., Roberts, J. C. “Analytic and finite element solutions for bending and buckling of orthotropic rectangular plates“, Int. of Journal of solids and structures 34 (14), pp. 1797 – 1822, 1997.
- Zhang, Y.X., Yang, C.H. “Recent developments in finite element analysis for laminated composite plates“, Composite structure 88(1), pp. 147 – 157, 2009.
- Mauricio, F. C. Jr., Antonio, J.M. Ferreira, Volnei, T. “A review on plate and shell theories for laminated and sandwich structures highlighting the Finite Element Method“, Int. Journal of Composite structures 156, pp. 63 – 67, 2016.
- Anakpotchanakul, Ch., Prombut, P. “Influence of aspect ratios on vibration and bending of composite laminates“, Materials today proceedings 17(4), pp. 1588 – 1594, 2019.
- Kaw, A. K. “Mechanics of Composite material“, second edition, Taylor & Francis, 2006. ISBN 978-0-8493-1343-1
- Manahan, M. A. “A Finite Element Study of the Deflection of Simply Supported Composite Plates Subject to Uniform Load“, M.E Thesis, Rensselaer Polytechnic Institute Hartford, Connecticut, 2011.
- Carroll, K. “Maximum Deflection Analysis of Simply Supported Aluminum and Composite Plates Under Uniform Pressure Using Rayleigh-Ritz Method and Finite Element Method“, M.E Thesis, Rensselaer Polytechnic Institute Hartford, Connecticut, 2013.
- Yang, Q. J. (): “Simplified Approaches to Buckling of Composite Plates“, Thesis for Master of Science, University of Oslo, 2009.
- Reddy, J. N. “Mechanics of Laminated composite plates and shells- Theory and analysis“, CRC Press, London, New York, 1997. ISBN 0-8493-1592-1
- Choudhury, A., Mondal, S.C., Sarkar, S. “Failure Analysis of Laminated composite plate under hygro thermomechanical load and optimization”, IJAME 24(3), pp. 509 – 526, 1999.
- Choudhury, A., Mondal, S.C., Sarkar, S. “Failure Analysis of Laminated composite beam for different boundary condition under thermomechanical load”, IJAME 25(1), pp.12 – 26, 2020.
- Javadi, H., Rajabi, I., Yavari, V., Kadivar, M. H. “Three-dimensional solutions for contact area in laminated composite pinned joints with symmetric and non-symmetric stacking sequences“, Strojnícky časopis – Journal of Mechanical Engineering 58(6), pp. 327 – 339, 2007.
- Choudhary, S. S., Tungikar, V.B. “A simple higher-order theory for dynamic analysis of composite plate“, Strojnícky časopis – Journal of Mechanical Engineering 61 (3), pp. 169 – 182, 2010.