Simulation of the Instant Supply in Gear Hydraulic Machines

Kuleshkov, Yuriy; Chernovol, Mikhailo; Mahopets, Sergii; Bevz, Oleh; Vorontsov, Borys; Kyrychenko, Iryna; Protasov, Roman

doi:10.2478/scjme-2023-0010

Abstract

The article proposes a new technique for estimating the instantaneous supply in gear hydraulic machines. It takes into account the peculiarity of the movement of the radius connecting the centers of rotation of the gears with the point of engagement. The dependence of the angular velocity of rotation and the length of the radius on the position of the engagement point due to slipping of the working profiles of the gear teeth are determined. Estimation of the degree of non-uniformity of the supply, in accordance with the obtained model, differs significantly from the traditional ideas about the pulsation of the instantaneous supply in gear hydraulic machines.

References

[1] Yudin, E.M. “Gear pumps. Basic parameters and their calculation / Yudin E. M. – [2nd ed. revised and add.]”, – M.: Mashinostroenie, 236 p., 1964.
Search in Google Scholar Back to article
[2] Kuleshkov, Yu.V. “Improvement of the mathematical model of the instantaneous supply of a gear pump”, / Kuleshkov Yu.V., Osin R.A., Rudenko T.V., Matvienko O.O. //Collection of science practices of the Kirovohrad National Technical University “Technology in the Agricultural Production, Galuzev machine–building, Mutomation” – Kirovohrad, KNTU, – No. 21., pp. 253 – 262, 2008.
Search in Google Scholar Back to article
[3] “The theoretical flow ripple of an external gear pump” a Thesis presented lo the Faculty of the Graduate School University of Missouri–Columbia In Partial Fulfillment Of the Requirements for the Degree Master of Science By Suresh Babu Kasaragadda dr. Noah d. Manring. Thesis Supervisor december 2003.
Search in Google Scholar Back to article
[4] Casoli, P., Vacca, A., Berta, G. L. “Optimization of relevant design parameters of external gear pumps”, Department of Industrial Engineering, University of Parma Viale G. P. Usberti 181/a, 43100 Parma, Italy. Electronic resource http://www.jfps.jp/proceedings/toyama2008/pdf/p1–05.pdf.
Search in Google Scholar Back to article
[5] Andrea Vacca Projects GearUnits / A. Vacca – Purdue University, 2006. access mode: https://engineering.purdue.edu/maha_avteam/research%20projects/projectsgearunitssept16.pdf.
Search in Google Scholar Back to article
[6] Tkach, P., Reviakina, O., Kryvosheia, A., Melnyk, V., Ustynenko, O., Protasov, R. “Meshing characteristics of profile shifted cylindrical quasi-involute arc-tooth-trace gears. Part 1. Theoretical base”, Strojnícky časopis – Journal of Mechanical Engineering 72 (2), pp. 201 – 210, 2022. DOI: 10.2478/scjme-2022-0029
Search in Google Scholar Back to article
[7] “A numerical model for the simulation of external gear pumps”, Paolo Casoli, Andrea Vacca and Germano Franzoni. Dipartimento di Ingegneria Industriale Università degli Studi di Parma Parco Area delle Scienze 181/a, 43100 Parma, Italy.
Search in Google Scholar Back to article
[8] Casoli, P., Vacca, A., Berta, G. L. “A numerical model for the simulation of flow in hydraulic external gear machines [Tener]: Power Transmission and Motion Control”, pp. 147 – 165, 2006.
Search in Google Scholar Back to article
[9] Hujo, Ľ., Kaszkowiak, J., Nosian, J., Michalides, M. “Test of oil filters on laboratory test device”, Strojnícky časopis – Journal of Mechanical Engineering 72 (3), pp. 27 – 34, 2022. DOI: 10.2478/scjme-2022-0037
Search in Google Scholar Back to article
[10] Kosenok, B. B. “Mathematical vector modeling of fluid supply pulsations by a gear pumping unit”, / B.B. Kosenok, A.N. Kryuchkov, L.V. Rodionov, E.V. Schakhmatov. // Proceedings of the samara scientific center of the russian academy of sciences 11 (3), pp. 28 – 37, 2009.
Search in Google Scholar Back to article
[11] Rodionov, L. V. “Development of methods for calculating and improving the dynamic characteristics of gear pumps”, diss. cand. tech. sciences / Rodionov Leonid Valerievich. – Samara, 154 p., 2009.
Search in Google Scholar Back to article
[12] Andrea, V. “Modeling and experimental validation of external spur gear machines for fluid power applications” / Andrea V., Guidetti M. – MAHA Fluid Power Research Center, Purdue University, West Lafayette, in, USA, CASAPPA SPA, Cavalli di Collecchio, Parma, Italy – 2011. access mode: http://www.sciencedirect.com/science/article/pii/s1569190x11001018
Search in Google Scholar Back to article
[13] Kuleshkov Yu., V. “Analysis of theoretical studies of the pulsation of the instantaneous supply of a gear pump”, / Kuleshkov Yu.V., Rudenko T.V., Krasota M.V., Kuleshkova K.Yu. // Foreign state international scientific and technical collection “Construction, design and operation of agricultural machines”. – Kirovograd, KDTU – No. 43, part 1 – p. 83 – 96, 2013.
Search in Google Scholar Back to article
[14] Zhao X, Vacca A. “Theoretical Investigation into the Ripple Source of External Gear Pumps”, Energies 12 (3): 535, 2019
Search in Google Scholar Back to article
[15] Gasparov, M. S. “Hydrodynamics and vibroacoustics of aviation combined pump units” diss. cand. tech. sciences / Gasparov Markar Sergeevich. – Samara, 166 p., 2006.
Search in Google Scholar Back to article
[16] Stroganova, N. V. “Automated modeling system for gear hydraulic pumps and their diagnostic complexes. diss. cand. tech. sciences / Stroganova Nadezhda Vasilievna. – Omsk, 121 p., 2009.
Search in Google Scholar Back to article
[17] Kuleshkov Yu., V. “Analysis of experimental studies of instantaneous feed pulsation of a gear pump”, / Kuleshkov Yu.V., Rudenko T.V., Krasota M.V., Kuleshkova K.Yu. // Foreign state international scientific and technical collection “Construction, design and operation of agricultural machines”. – Kirovograd, KDTU – no. 43, part ii – p. 134 – 148, 2013.
Search in Google Scholar Back to article
[18] Artobolevsky, I. I. “Theory of mechanisms and machines” / Artobolevsky I. I. - [4th ed. revised and add.] – M.: Science. Ch. ed. Phys.-Math. lit., 640 p., 1988.
Search in Google Scholar Back to article
[19] Bashta, T. M. “Volumetric pumps and hydraulic engines of hydraulic systems”, / Bashta T.M. – M.: Mashinostroenie, 606 p., 1974.
Search in Google Scholar Back to article
[20] Kuleshkov, Y. V., Rudenko, T. V., Krasota, M. V., Bošanský, M., Tóth, F. “Performance features of tooth gearing in gear hydraulic machines”, Acta technologica agriculturae 2. Nitra, Slovak University Agriculture in Nitra, pp. 84 – 91, 2021.
Search in Google Scholar Back to article

Simulation of the Instant Supply in Gear Hydraulic Machines

Abstract

Paradigm

My account