Dynamic Stiffness Determination of the Rubber Bushing Fem Modelwith Viscoelastic Material Behaviour

Danko, Ján; Nemec, Tomáš; Milesich, Tomáš; Magdolen, Ľuboš

doi:10.2478/scjme-2022-0046

Abstract

Presented paper deals with determination of dynamic stiffness of rubber bushing. Viscoelasticity of rubber is introduced. Next rheological models are shown and determined. Theory of the viscoelastic constitutive relation are done with storage modulus and loss modulus. Rubber bushing FEM model was prepared for calculation of dynamic stiffness through dynamic harmonic analysis in MSC Marc. Results from simulations are compared to experimental measurement data.

References

[1] Gent, A, N. “Engineering with Rubber: How to Design Rubber Componets”, (Third Edition), Hanser, 2012. ISBN 9783446427648
Search in Google Scholar Back to article
[2] ALBERS, A., FISCHER, J., BEHRENDT, M., et al. “Measurement and Interpretation of the Transfer Path of an Acoustic Phenomenon in the Drivetrain of an Electric Vehicle”, ATZ Worldwide 116, pp. 48 – 55, 2014. DOI: 10.1007/s38311-014-0154-7
Open DOI Search in Google Scholar Back to article
[3] Marbjerg, G. “Noise from Electric Vehicle – Literature Survey Nr. 535”, Vejdirektoratet, 2014. ISBN 978-87-93184-60-2
Search in Google Scholar Back to article
[4] “MSC Software Corporation, MSC Marc - Online Help” [online] Available at: https://help.mscsoftware.com/ [Accessed: date (25 3 2022)].
Search in Google Scholar Back to article
[5] Popardovský, V. “Optimization of Vehicle Suspension Neural Model”, Proc. of the 22nd International Scientific Conference Transport Means 2018, ISSN 1822-296X, Trakai, Lithuania, pp.1361 – 1364, 2018.
Search in Google Scholar Back to article
[6] Popardovský, V., Popardovská, E. “Vehicle Suspension Control Based on PID Controller Adapted by Feed-Forward Neural Network”, In: Zeszyty Naukowe Instytutu Pojazdów, Warsaw University of Technology, ISSN 1642-347X, pp.99 – 107, 2017.
Search in Google Scholar Back to article
[7] Danko, J., Bucha, J., Milesich, T., Magdolen, L., Kevický, I., Minárik, M., Mišković, Z., Mitrović, R. “Dynamic Properties Modeling Analysis of the Rubber-Metal Elements for Electric Drive”, Strojnícky časopis – Journal of Mechanical Engineering 71 (1), pp. 19 – 26, 2021. DOI: 10.2478/scjme-2021-0002
Open DOI Search in Google Scholar Back to article
[8] Magdolen, L., Danko, J., Milesich, T., Nemec T., Sloboda, K., Bucha, J. “Dual Mass Flywheel Parameter Identification”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 167 – 178, 2021. DOI: 10.2478/scjme-2021-0027
Open DOI Search in Google Scholar Back to article
[9] Sandell, V. “Extraction of Material Parameters for Static and Dynamic Modeling of Carbon Black Filled Natural Rubbers“, Master Thesis in Material Engineering. Luea University of Technology, pp 111, 2017.
Search in Google Scholar Back to article

Dynamic Stiffness Determination of the Rubber Bushing Fem Modelwith Viscoelastic Material Behaviour

Abstract

Paradigm

My account