Emission Problems of Vehicles and Advanced Fuels Application

Tarbajovský, Pavol; Šoltésová, Marieta; Puškár, Michal

doi:10.2478/scjme-2022-0038

Abstract

The automotive industry is exposed to continued pressures, the goal of which is decarbonisation together with application of the advanced technologies and fuels, as well as utilization of the alternative vehicle drives. The main task of the scientific publication was a complex emission analysis of the selected vehicles during various test cycles, as well as a comparison of the individual emissions when using different types of fuel.

References

[1] Chríbik, A., Polóni, M., Minárik, M., Miskovic, Z. “The Effect of Inert Gas in the Mixture with Natural Gas on the Parameters of the Combustion Engine”, Computational and Experimental Approaches in Materials Science and Engineering, pp. 410 – 426, 2019. ISBN 978-3-030-30853-7.
Search in Google Scholar Back to article
[2] Czech, P. “Diagnose Car Engine Exhaust System Damage Using Bispectral Analysis and Radial Basic Function”, Proceedings of the International Conference on Computer, Networks and Communication Engineering, 2013. ISBN 978-90-78677-67-3
Search in Google Scholar Back to article
[3] Polóni, M., Chríbik, A. “Low-Energy Synthesis Gases from Waste as Energy Source for Internal Combustion Engine”, SAE International Journal of Engines 13 (5), pp. 633 – 648, 2020. ISSN 1946-3936
Search in Google Scholar Back to article
[4] Frank, J. R., Brown, T. R., Malmsheimer, R. W., et al. “The financial trade-off between the production of biochar and biofuel via pyrolysis under uncertainty”, Biofuel Bioprod Bior 14(3), pp. 594 – 604, 2020.
Search in Google Scholar Back to article
[5] Puškár, M., Kopas, M. “System based on thermal control of the HCCI technology developed for reduction of the vehicle NOx emissions in order to fulfil the future standard Euro 7”, Science of The Total Environment 643, pp. 674 – 680, 2018. ISSN 0048-9697
Search in Google Scholar Back to article
[6] Brandt, K. L., Wooley, R. J., Geleynse, S. C., et al. “Impact of co-product selection on techno-economic analyses of alternative jet fuel produced with forest harvest residuals”, Biofuel Bioprod Bior 14 (4), pp. 764 – 775, 2020.
Search in Google Scholar Back to article
[7] Punov, P., Gechev, T., Mihalkov, S. Podevin, P., Barta, D. “Experimental study of multiple pilot injection strategy in an automotive direct injection diesel engine”, MATEC Web of Conferences 234, pp. 03007, 2018. ISSN 2261-236X
Search in Google Scholar Back to article
[8] Chen, H., Su, X., He, J., Xie, B. “Investigation on combustion and emission characteristics of a common rail diesel engine fueled with diesel/n-pentanol/methanol blends”, Energy 167, pp. 297 – 311, 2019.
Search in Google Scholar Back to article
[9] Geng, L., Xiao, Y., Li, S., Chen, H., Chen, X. “Effects of injection timing and rail pressure on particulate size-number distribution of a common rail DI engine fueled with fischer-tropsch diesel synthesized from coal”, Journal of the Energy Institute 95, pp. 219 – 230, 2020. ISSN 1743-9671
Search in Google Scholar Back to article
[10] Li, W., Dumortier, J., Dokoohaki, H., et al. “Regional techno-economic and life-cycle analysis of the pyrolysis-bioenergy-biochar platform for carbon-negative energy”, Biofuel Bioprod Bior 13 (6), pp. 1428 – 1438, 2019.
Search in Google Scholar Back to article
[11] Hanko, L., Magdolen, Ľ., Danko, J., Milesich, T., Križan, P., Skyrčák, R. “Simulation of Pedestrian Detection in Urban Environment”, Strojnícky časopis – Journal of Mechanical Engineering 71(2), pp. 121 – 130, 2021. ISSN 2450-5471
Search in Google Scholar Back to article
[12] Osipowicz, T., Abramek, K., Barta, D., Droździel, P., Lisowski, M. “Analysis of possibilities to improve environmental operating parameters of modern compression – ignition engines”, Advances in Science and Technology Research Journal 12(2), pp. 206 – 213, 2018. ISSN 2299-8624
Search in Google Scholar Back to article
[13] Bos, H. L., Broeze, J. “Circular bio-based production systems in the context of current biomass and fossil demand”, Biofuel Bioprod Biorvol 14 (2), pp. 187 – 197, 2020.
Search in Google Scholar Back to article
[14] Danko, J., Bucha, J., Milesich, T., Magdolen, Ľ., Kevický, I., & Minárik, M. et al. “Dynamic Properties Modeling Analysis of the Rubber-Metal Elements for Electric Drive”, Strojnícky časopis – Journal of Mechanical Engineering 71(1), pp. 19 – 26, 2021. DOI: 10.2478/scjme-2021-0002
Open DOI Search in Google Scholar Back to article
[15] Chríbik, A., Minárik, M., Polóni, M. “Effect of Selected Components on Combustion of Methane”, Strojnícky časopis – Journal of Mechanical Engineering 71(2) pp. 61 – 68, 2021. DOI: 10.2478/scjme-2021-0018
Open DOI Search in Google Scholar Back to article
[16] Kuric, I., Klačková, I., Nikitin, Y. R., Zajačko, I., Císar, M., Tucki, K. “Analysis of diagnostic methods and energy of production systems drives”, Processes 9(5) pp. 843, 2021. ISSN 2227-9717
Search in Google Scholar Back to article
[17] Lamas, M. I., Rodriguez, C. G., Rodriguez, J. D., Telmo, J. “Internal modifications to reduce pollutant emissions from marine engines”, A numerical approach, Int. J. Naval Archit. Mar. Eng. 5 (4), pp. 493–501, 2013. ISSN 2092-6782.
Search in Google Scholar Back to article
[18] Skrzek, T., Rucki, M., Górski, K., Matijošius, J., Barta, D., Caban, J., Zarajczyk, J. “Repeatability of high-pressure measurement in a diesel engine test bed”, Sensors 20 (12) pp. 3478, 2020. ISSN 1424-8220.
Search in Google Scholar Back to article
[19] Toman, R., Polóni, M., Chríbik, A. “Preliminary study on combustion and overall parameters of syngas fuel mixtures for spark ignition combustion engine”, Acta Polytechnica 57 (1), pp. 38 – 48, 2017. ISSN 1805–2363
Search in Google Scholar Back to article
[20] Puškár, M., Bigoš, P. “Measuring of accoustic wave influences generated at various configurations of racing engine inlet and exhaust system on brake mean effective pressure”, Measurement 46 (9), pp. 3389 – 3400, 2013. ISSN 0263-224
Search in Google Scholar Back to article

Emission Problems of Vehicles and Advanced Fuels Application

Abstract

Paradigm

My account