References
- [1] EU directives: EU 2003/54/ES, 2004/8/ES, 2009/28/ES, 2012/27/EU
- [2] Lieskovská, Z., Lényiová, P. editors: “Spáva o stave životného prostredia Slovenskej republiky v roku 2018”, Ministerstvo životného prostredia Slovenskej republiky, Bratislava, 2019. ISBN 978-80-8213-007-5 (in Slovak)
- [3] Ramos, A., Teixeira, C. A., Rouboa A. “Environmental Assessment of Municipal Solid Waste by Two-Stage Plasma Gasification”, Energies 12 (1), 137, 2019. DOI: 10.3390/en12010137
- [4] Orr, D., Maxwell, D. “A Comparison of Gasification and Incineration of Hazardous Wastes – Report”, 2000. DCN 99.803931.02
- [5] Puškár, M., Markovič, J., Král, Š. et al.: “Influence of biofuels on production of gaseous emission from diesel engine with regard to air quality”, Air Qual Atmos Health 13, pp. 763 – 772, 2020. DOI: 10.1007/s11869-020-00834-6
- [6] Kapilan, N., Jullya, N. “Studies on Improvement of Performance of Compression Ignition Engine Fuelled with Mixture of Honge Biodiesel and Tire Pyrolysis Oil”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 15 – 24, 2018. DOI: 10.2478/scjme-2018-0002
- [7] Laurence, L.C., Ashenafi, D.: “Syngas Treatment Unit for Small Scale Gasification - Application to IC Engine Gas Quality Requirement”, Journal of Applied Fluid Mechanics 5 (1), pp. 95 – 103, 2012.
- [8] Bates, R. P., Dölle, K. “Syngas Use in Internal Combustion Engines – A Review”, Advances in Research 10(1), pp. 1 – 8, 2017.
- [9] Milne, T. A., Evans, R.J., Abatzoglou, N. “Biomass gasifier “Tars”: Their Nature, Formation and Conversion”, US: National Renewable Energy Laboratory; NREL/TP-570-25357, pp. 37 – 38, 1998.
- [10] Chríbik, A., Polóni, M., Minárik, M. “Influence of Selected Synthesis Gas Component on Internal Parameters of Combustion Engine”, Strojnícky časopis – Journal of Mechanical Engineering 69 (4), pp. 25 – 32, 2019. DOI: 10.2478/scjme-2019-0040
- [11] Chríbik, A., Polóni, M., Minárik, M. “Use of Methane-Free Synthesis Gases as Fuel in an Spark Ignition Combustion Engine”, Strojnícky časopis – Journal of Mechanical Engineering 70 (2), pp. 37 – 48, 2020. DOI: 10.2478/scjme-2020-0018
- [12] Merker, G. P., Schwarz, Ch., Teichmann, R. “Combustion Engines Development: Mixture Formation, Combustion, Emissions and Simulation”, Springer-Verlag Berlin Heidelberg 2012. ISBN 978-3-642-02951-6, DOI: 10.1007/978-3-642-14094-5