Determination of Measurement Parameters for Vibration Analysis by Bus
References
- [1] Hajdu, F., Kuti, R. “Examination of chaotic vibrations during operation of a fire truck”, in Proceedings of MAC 2018 in Prague Prag, Czech Rebuplic 25-27 May 2018, pp. 163 – 170, 2018.
- [2] Fakhraei, J., Khanlo, H. M., Ghayour, M. “Chaotic behaviors of a ground vehicle oscillating system with passengers”, Scientia Iranica 24 (3), pp. 1051 – 1068, 2017. DOI: 10.24200/sci.2017.4088
- [3] Marzbanrad, J., Keshavarzi, A. “Chaotic Vibrations of a Nonlinear air Suspension System under Consecutive Half Sine Speed Bump”, Indian Journal of Science & Technology 8 (3), 2015. DOI: 10.17485/ijst/2015/v8iS3/52684
- [4] Patricio, P. S. “Effects of Frame Design and Cab Suspension on the Ride Quality of Heavy Trucks”, Master thesis, Virginia Polytechnic Institute and State University, 2002. [online] Available at: https://vtechworks.lib.vt.edu/bitstream/handle/10919/34865/thesis4b.pdf?sequence=1&isAllowed=y [Accessed: 20.04.2022.]
- [5] Sendur, P., Kurtdere, A., Akalyar, O. “A methodology to improve streering wheel vibration of a heavy commercial truck”, SAE Technical Paper 2013-01-2351, 2013. DOI: 10.4271/2013-01-2351
- [6] Lu, Y., Li, S., Chen, N. “Research on Damping Characteristics of Shock Absorber for Heavy Vehicle”, Research Journal of Applied Sciences, Engineering and Technology 5(3), pp. 842 – 847, 2013. DOI: 10.19026/rjaset.5.5030
- [7] Yenerer, H., Stan, A. C., Sendur, P., Basdogan, I. “Vibro-Acoustic Analysis of a Heavy Duty Truck Cabin”, in Proceedings of the 12th Biennial Conference on Engineering Systems Design and Analysis ESDA 2014, Copenhagen, Denmark, 25-27. June, 2014. DOI: 10.1115/ESDA2014-20559
- [8] Gagliardi, J. C., Utt, W. K. “Vibration Environmental Testing for Large Haulage Trucks”, Report of investigations (United States. Bureau of Mines), 9483, 1993. [online] Available at: https://stacks.cdc.gov/view/cdc/10278, [Accessed: 05.04.2022.].
- [9] Li, S., Lu, Y., Li, L. “Dynamical Test and Modeling for Hydraulic Shock Absorber on Heavy Vehicle under Harmonic and Random Loadings”, Research Journal of Applied Sciences, Engineering and Technology 4(13), pp. 1903 – 1910, 2012. [online] Available at: https://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.470.206&rep=rep1&type=pdf, [Accessed: 05.05.2022.]
- [10] Szauter, F. “Dynamic Modeling, Identification and Vibration Analysis of Road Vehicles” (in Hungarian), PhD. thesis, Széchenyi István University, 2017. [online] Available at: https://mmtdi.sze.hu/downloadmanager/download/nohtml/1/id/29196/m/1584, [Accessed: 02.04.2022]
- [11] Szauter, F., Istenes, G., Rödönyi, G. “AR and ARMA Spectral Analysis of Suspension System of a Commercial City Bus”, IEEE 14th International Symposium on Computational Intelligence and Informatics. CINTI, Budapest, Hungary, 17-19 Nov. 2016. Paper No. 16666841. DOI: 10.1109/CINTI.2016.7846395
- [12] Zhao, L., Zhou, C., Yu, Y., Yang, F. “A method to evaluate stiffness and damping parameters of cabin suspension system for heavy truck”, Advances in Mechanical Engineering, 2016. DOI: 10.1177/1687814016654429
- [13] Alvarez-Sanchez, E. “A quarter-car suspension system: car body mass estimator and sliding mode control”, Procedia Technology 7, pp. 208 – 214, 2013. DOI: 10.1016/j.protcy.2013.04.026
- [14] Schiffer, A., Ivanyi, A. “Two-dimensional vector hysteresis model”, Pollack Periodica 1 (2), pp. 83 – 97, 2006. DOI: 10.1556/Pollack.1.2006.2.7
- [15] Pop, N., Ovidiu, C., “Algorithm to describe magnetization curves by using Jiles Atherton model”, Pollack Periodica 5(2) pp. 155 – 165, 2010. DOI: 10.1556/pollack.5.2010.3.13
- [16] Csurcsia, P. “Static nonlinearity handling using best linear approximation: An introduction”, Pollack Periodica 8(1), pp. 153 – 165, 2013. DOI: 10.1556/pollack.8.2013.1.14
- [17] Magdolen, L., Danko, J., Milesich, T., Nemec, T., Sloboda, K., Bucha, J. “Dual Mass Flywheel Parameter Identification”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 167 – 178, 2021. DOI: 10.2478/scjme-2021-0027
- [18] Shi, W. K., Liu, C., Chen, Z. Y., He, W., Zu, Q. H. “Efficient method for calculating the composite stiffness of parabolic leaf springs with variable stiffness for vehicle rear suspension”, Mathematical Problems in Engineering 2016, Paper ID 5169018, pp. 1 ‒ 12, 2016. DOI: 10.1155/2016/5169018
- [19] Likaj, R., Shala, A. “Optimisation and Control of Vehicle Suspension Using Linear Quadratic Gaussian Control”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 61 – 68, 2018. DOI: 10.2478/scjme-2018-0006
- [20] Jiao, L. “Vehicle model for tyre-ground contact force evaluation”, Master thesis, KTH Royal Institute of Technology, 2013. [online] Available at: https://www.diva-portal.org/smash/get/diva2:872185/FULLTEXT01.pdf, [Accessed: 05.05.2022.]
Language: English
Page range: 189 - 200
Published on: Nov 7, 2022
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Related subjects:
© 2022 Péter Szalai, Flóra Hajdu, Péter Horváth, Csenge Papp, Antal Apagyi, Marame Brinissat, Rajmund Kuti, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.