Diagnostics of a Clamping Joint System

Musil, Miloš; Úradníček, Juraj; Páleník, Marek; Chlebo, Ondrej

doi:10.2478/scjme-2022-0022

Abstract

The article describes a diagnostic method, on the basis of which it is possible to assess whether there is a loose connection in the clamping system (detection) and to determine which of them is loose (localization). The diagnostic method is based on comparing the drops in the natural frequencies of a measured system with respect to a reference system, which simulates the desired state. When analysing the drop in natural frequencies in order to locate the loosening, it is necessary to relate this drop to the position of the clamping joints within the considered mode shape.

References

[1] Jim, C. “Fasteners vs. Vibration”, 2014. [online] https://www.assemblymag.com/articles/92444-fasteners-vsvibration
Search in Google Scholar Back to article
[2] Ewins, D. J. “Modal Testing: Theory and Practice, Research Studies Press”, 1984. http://blogs.solidworks.com/tech/2016/08/breaking-down-a-modal-analysis-design-study.html
Search in Google Scholar Back to article
[3] Titurus, B., Yuan, J., Scarpa, F., Patsias, S., Pattison, S. “Impact hammer-based analysis of nonlinear effects in bolted lap joint”, Conference: Proceedings of ISMA 2016 - International Conference on Noise and Vibration Engineering and USD 2016 - International Conference on Uncertainty in Structural Dynamics. At: K U Leuven, 2016.
Search in Google Scholar Back to article
[4] Miláček, S. “Modální analýza mechanických kmitú”, ČVUT, 1992. (in Czech)
Search in Google Scholar Back to article
[5] Moaveni, S. “Finite Element Analysis, Theory and application with ANSYS”, Prentice Hall, 1999.
Search in Google Scholar Back to article
[6] Friswell, M. I., Mottershead J. E. “Finite Element Model Updating in Structural Dynamics”, Kluwer Academic Publishers Dordrech/Boston/London, 1993.
Search in Google Scholar Back to article
[7] Majid, J.-O., Mohammad Reza, M. S. “Investigation of defect effects on adhesively bonded joint strength using cohesive zone modeling”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 5 – 24, 2018. DOI: 10.2478/scjme-2018-0023
Open DOI Search in Google Scholar Back to article
[8] Frydrýšek, K., Jančo, R., Gondek, H. “Solutions of Beams, Frames and 3D Structures on Elastic Foundation Using FEM”, International Journal of Mechanics 7 (4), 2013.
Search in Google Scholar Back to article
[9] Žiaran, S. “Technická mechanika Statika”, STU Bratislava, 2011. (in Slovak)
Search in Google Scholar Back to article
[10] Inman, D. J. “Engineering Vibration – Second edition”, Pearson Education, Prentice Hall, Upper Saddle River, NJ 07458, 2000.
Search in Google Scholar Back to article
[11] Meirovitch, L. “Analytical Methods in Vibrations”, The Macmillan Company, Collier-Macmillan Limited, London, 1967.
Search in Google Scholar Back to article
[12] Stradiot, J. a kol., “Dynamika strojov”, ALFA, Bratislava, 1991. (in Slovak)
Search in Google Scholar Back to article
[13] Bocko, J., Segľa, Š., Huňady, R. “Kmitanie mechanických sústav”, TU v Košiciach, 2017. (in Slovak)
Search in Google Scholar Back to article
[14] Juliš, K., Brepta, R. “Mechanika II. díl - Dynamika”, SNTL Praha, 1987. (in Czech)
Search in Google Scholar Back to article
[15] Brepta, R., Půst, L., Turek, F. “Mechanické kmitání”, Sobotáles, 1994. (in Czech)
Search in Google Scholar Back to article
[16] Šolek, P. “Technická mechanika II”, STU Bratislava, 2009. (in Slovak)
Search in Google Scholar Back to article
[17] Záhorec, O. “Dynamika”, Strojnícka fakulta Technickej univerzity, 2002. (in Slovak)
Search in Google Scholar Back to article
[18] Slavík, J., Stejskal, V., Zeman, V. “Základy dynamiky strojů”, ČVUT Praha, 1997. (in Czech)
Search in Google Scholar Back to article
[19] Jamia, N., Jalali, H., Taghipour, J., Friswell, M. I., Khodaparast, H. H., “An equivalent model of a nonlinear bolted flange joint”, Elsevier MSSP, 2021.
Search in Google Scholar Back to article
[20] Bocko, J., Segľa, Š. “Numerické metódy v strojárstve”, TU v Košiciach, 2020.
Search in Google Scholar Back to article
[21] Brons, M., Thomsen, J. J. “Experimental testing of Timoshenko predictions of supercritical natural frequencies and mode shapes for free-free beams”, Journal of Sound and Vibration 459, 2019. DOI: 10.1016/j.jsv.2019.114856
Open DOI Search in Google Scholar Back to article
[22] Dasari, K. R., Kolla, S. “Comparison of dominant features identification for tool wear in hard turning of Inconel 718 by using vibration analysis”, Strojnícky časopis – Journal of Mechanical Engineering 69 (4), pp. 1 - 8, 2019. DOI: 10.2478/scjme-2019-0038
Open DOI Search in Google Scholar Back to article
[23] He, J. J., Zhou, Y. B. “A novel mode shape reconstruction method for damage diagnosis of cracked beam”, Mechanical Systems and Signal Processing 122, pp. 433 – 447, 2019. DOI: 10.1016/j.ymssp.2018.12.045
Open DOI Search in Google Scholar Back to article
[24] Dong, G. M., Chen, J., Zhao, F. G. “Monitoring of the Looseness in Cargo Bolts under Random Excitation Based on Vibration Transmissibility”, Shock and Vibration 2021, 2021. DOI: 10.1155/2021/8841940
Open DOI Search in Google Scholar Back to article

Diagnostics of a Clamping Joint System

Abstract

Paradigm

My account