Effect of Load Eccentricity on Stress Condition of Butt Welded Joint with Asymmetrical Reinforcement

Moltasov, Andrii; Tkach, Pavlo; Ustynenko, Oleksandr; Protasov, Roman

doi:10.2478/scjme-2022-0010

Abstract

An analytical method for determination of a stress condition of butt welded thin-gauge plates with asymmetrical reinforcement is developed. The proposed method allows take into account the effect of the load application eccentricity on the tensile stress concentration factor (SCF) in the weld root zone. It is presented that the bending stresses, caused by this eccentricity, result in increasing the total stresses up to 75%. The results of analytical SCF calculations are in good agreement with the results obtained using the finite element method.

References

[1] Moi Subhas, Ch., Ramesh, R., Kumar, P. P., Asish, B. “Analysis of Impact Behaviour of TIG Weldment by Using Hybrid RSM and CSO”, Strojnícky časopis – Journal of Mechanical Engineering 69 (4), pp. 105 – 114, 2019. DOI: 10.2478/scjme-2019-0046
Search in Google Scholar Back to article
[2] Srinivasa Rao, M., Tangudu S. S., Perumalla, S., Uppda, B. R., Yandra, Ch., Kambhampati, K. “Effect of TIG and FSW Welding Processes on Mechanical Properties of Al-4.2Mg-0.6Mn-0.4Sc-0.1Zr Alloy”, Strojnícky časopis – Journal of Mechanical Engineering 71 (2), pp. 299 – 304, 2021. DOI: 10.2478/scjme-2021-0036
Search in Google Scholar Back to article
[3] Kovalchuk, M., Iurzhenko, M., Demchenko, V., Senchenkov, I. “The Investigation of the Welding Process of Different-Type Polyethylenes”, In: Pogrebnjak, A., Novosad, V. (eds) Advances in Thin Films, Nanostructured Materials, and Coatings. Lecture Notes in Mechanical Engineering. Springer, Singapore, 2019. DOI: 10.1007/978-981-13-6133-3_23
Search in Google Scholar Back to article
[4] Skriko, T., Ahola, A. & Björk, T. “Overview on the digitized production of welded steel structures”, Welding in the World, 2022. DOI: 10.1007/s40194-021-01224-x
Search in Google Scholar Back to article
[5] Klochkov, I., Poklaytsky, A., Motrunich, S. “Fatigue behavior of high strength Al-Cu-Mg and Al-Cu-Li alloys joints obtained by fusion and solid state welding technologies”, Journal of Theoretical and Applied Mechanics 49(2), pp. 179 – 189, 2019. DOI: 10.7546/JTAM.49.19.02.07
Search in Google Scholar Back to article
[6] Poklyatsky, A. G., Knysh, V. V., Klochkov, I. N., Motrunich, S. I. “Features and advantages of the process of friction stir welding of butt joints of sheet aluminum-lithium alloys”, The Paton Welding Journal 5 – 6, pp. 86 – 90, 2016. DOI: 10.15407/as2016.06.15
Search in Google Scholar Back to article
[7] Hobbacher, A. F. “Recommendations for fatigue design of welded joints and components”, IIW Collection, 2^nd Edition, series Editor Cècile Mayer, Springer International Publishing, Villepinte, France, 2016. DOI: 10.1007/978-3-319-23757-2
Search in Google Scholar Back to article
[8] Goyal, R., El-Zein, M., Glinka, G. “A robust stress analysis method for fatigue life prediction of welded structures”, Welding in the World 60(2), pp. 299 – 314, 2016. DOI: 10.1007/s40194-016-0295-y
Search in Google Scholar Back to article
[9] Tkach, P. N., Moltasov, A. W. “Development of Methods for the Assessment of Stresses in Welded Structure Elements: Part 2. The Latest Methods”, Bulletin of the Institute of Welding 61(5), pp. 123 – 133, 2017. DOI: 10.17729/ebis.2017.5/14
Search in Google Scholar Back to article
[10] Moltasov, A. V. “A Study of the Stress State in Stress Concentration Zones under Tension of an Asymmetrically Reinforced Butt-Welded Joint”, Strength of Materials 49(5), pp. 718 – 725, 2017. DOI: 10.1007/s11223-017-9917-x
Search in Google Scholar Back to article
[11] Tsumarev, Yu. A. “Effect of off-centre tensile loading on the stress state of butt-welded joints”, Welding International 25 (11), pp. 872 – 875, 2011. DOI: 10.1080/09507116.2011.581426
Search in Google Scholar Back to article
[12] Lukianenko, A., Labur, T. M., Pokliatskyi, A. G., Motrunich, S., Bajic, D. “Investigation of fatigue strength and norms of emission of harmful substances in the air during MIG and TIG welding of 1460 aluminum-lithium alloy”, FME Transactions 47(3), pp. 608 – 612, 2019. DOI: 10.5937/fmet1903608L
Search in Google Scholar Back to article
[13] Moltasov, A. V. “Application of the method of nonplanar sections to determine stresses in the zones of concentration caused by weld reinforcement in butt-welded joints”, Strength of Materials 45(1), pp. 116 – 122, 2013. DOI: 10.1007%2Fs11223-013-9438-1
Search in Google Scholar Back to article
[14] Poklyatsky, A. G., Klochkov, I. N., Motrunich, S. I. “Some advantages of butt joints of thin wrought aluminum alloys AMg5M and AMg6M produced by FSW, compared to TIG-welded joints”, The Paton Welding Journal 7, pp. 16 – 21, 2015. DOI: 10.15407/tpwj2015.07.03
Search in Google Scholar Back to article
[15] Moltasov, A. V. “Approximate calculation of radius of weld transition to base metal of welded butt joint according to normalized parameters”, The Paton Welding Journal 9, pp. 50 – 52, 2017. DOI: 10.15407/tpwj2017.09.09
Search in Google Scholar Back to article
[16] Moltasov, A. V., Klochkov, I. N. “Calculation of the radius of transition of the weld to base metal of aluminum alloys welded joints”, The Paton Welding Journal 9, pp. 40 – 42, 2019. DOI: 10.15407/tpwj2019.09.07
Search in Google Scholar Back to article
[17] Moltasov, A. V. “Stressed State of a Butt-Welded Joint with Regard for Displacements of the Centers of Inertia”, Materials Science 55 (3), pp. 358 – 366, 2019. DOI: 10.1007/s11003-019-00310-2
Search in Google Scholar Back to article
[18] Herrera, H. H., Espinosa, R. G., Eras, J. J. C., Morejon, M. B. “Stress in butt welded joints of open profiles under torsion”, Engineering. Chilean Engineering Magazine, 23 (4), pp. 638 – 646, 2015. DOI: 10.4067/S0718-33052015000400014 (in Spanish)
Search in Google Scholar Back to article

Effect of Load Eccentricity on Stress Condition of Butt Welded Joint with Asymmetrical Reinforcement

Abstract

Paradigm

My account