Have a personal or library account? Click to login
Experimental and Numerical Study on the Efficiency of the Repair of Composite Structures Cracked and V-Notched By Different Types and Shapes of Composite Material Patch Cover

Experimental and Numerical Study on the Efficiency of the Repair of Composite Structures Cracked and V-Notched By Different Types and Shapes of Composite Material Patch

Strojnícky časopis - Journal of Mechanical Engineering
Volume 72 (2022): Issue 1 (April 2022)
By: Mohamed Berrahou and  Kaoula Amari  
Open Access
|May 2022

References

  1. [1] Berrahou, M., Bachir Bouiadjra, B. “Analysis of the adhesive damage for different patch shapes in bonded composite repair of corroded aluminum plate”, Structural Engineering and Mechanics 59 (1), pp. 123 – 132, 2016. DOI: 10.12989/sem.2016.59.1.123
    Search in Google ScholarBack to article
  2. [2] Berrahou, M., Salem, M., Mechab, B., Bouiadjrab, B. B. “Effect of the corrosion of plate with double cracks in bonded composite repair”, Structural Engineering and Mechanics 64 (3), pp. 323 – 328, 2017. DOI: 10.12989/sem.2017.64.3.323
    Search in Google ScholarBack to article
  3. [3] Berrahou, M., Salem, M., Mechab, B. “Analyse de la défaillance d’une plaque réparée par patch en composite et renforcée par raidisseurs“, 1ère Conférences Sur Les Energies Renouvelables & Les Matériaux Avancés ERMA’19 Relizane, Algérie, pp. 276 – 280, 2019.
    Search in Google ScholarBack to article
  4. [4] Berrahou, M., Salem, M., Mechab Belaïd. “Effet de la corrosion sur la zone endommagée de l’adhésif d’une plaque réparée par patch en composite“, 4ème Séminaire International sur les Technologies Mécaniques Avancées STEMA, 2017.
    Search in Google ScholarBack to article
  5. [5] Salem, M., Berrahou, M., Mechab, B., Bouiadjra, B. B. “Effect of the angles of the cracks of corroded plate in bonded composite repair“, Frattura ed Integrità Strutturale 46, pp. 113 – 123, 2018. DOI: 10.3221/IGF-ESIS.46.12.
    Search in Google ScholarBack to article
  6. [6] Bouiadjra, B. B., Belhouari, M., Serier, B. “Computation of the stress intensity factors for repaired cracks with bonded composite patch in mode I and mixed mode“, Compos. Struct 56, pp. 401 – 406, 2002.
    Search in Google ScholarBack to article
  7. [7] Bouiadjra, B. B., Bouanani, M. Fari., Albedah, A., Benyahia, F., Es-Saheb, M. “Comparison between rectangular and trapezoidal bonded composite repairs in aircraft structures“, Mater. Des 32, pp. 3161 – 3166, 2011.
    Search in Google ScholarBack to article
  8. [8] Jones, R., Chiu, W. K. “Composite repairs to crack in metallic components“, Composite Structures 44, pp. 17 – 29, 1999.
    Search in Google ScholarBack to article
  9. [9] Baker, A. A. “Bonded composite repair for fatigue-cracked primary aircraft structure“, Composite Structures 74, pp. 431 – 443, 1999.
    Search in Google ScholarBack to article
  10. [10] Cetisli, F., Kaman, M. O. “Numerical analysis of interface crack problem in composite plates jointed with composite patch“, Steel Compos. Struct 16 (2). pp. 203 – 220, 2014.
    Search in Google ScholarBack to article
  11. [11] Mhamdia, R., Serier, B., Bachir Bouiadjra, B. B., Belhouari, M. “Numerical analysis of the patch shape effects on the performances of bonded composite repair in aircraft structures“, Compos Part B 43, pp. 391 – 397, 2012.
    Search in Google ScholarBack to article
  12. [12] Mhamdia, R., Bachir Bouiadjra, B., Serier, B., Ouddad, W., Feaugas, X., Touzain, S. “Stress intensity factor for repaired crack with bonded composite patch under thermo-mechanical loading“, Journal of Reinforced Plastics and Composites 0(00), pp. 1 – 9, 2011.
    Search in Google ScholarBack to article
  13. [13] Bouanani, M. F., Benyahia, F., Albedah, A., Aid, A., Bouiadjra, B. B., Belhouari, M., Achour, T. “Analysis of the adhesive failure in bonded composite repair of aircraft structures using modified damage zone theory“, Mater. Des 50. pp. 433 – 439, 2013.
    Search in Google ScholarBack to article
  14. [14] Ramji, M., Srilakshmi, R., Bhanu Prakash, M. “Towards optimization of patch shape on the performance of bonded composite repair using FEM“, Compos. B Eng 45. pp. 710 – 720, 2013.
    Search in Google ScholarBack to article
  15. [15] Gay, D. “Matériaux composites“. Hermès, 5ème édition, 1997.
    Search in Google ScholarBack to article
  16. [16] Berthelot, J. M. “Mécanique des matériaux et structures composites“. Lavoisier, 4ème édition édition, 2010.
    Search in Google ScholarBack to article
  17. [17] Carreira, R. P. “Les matériaux composites dans l’industrie des sports et loisirs“, In 2nd congrès du Réseau Français d’Ingénierie du Sport, 2005.
    Search in Google ScholarBack to article
  18. [18] C.A.R.M.A “Glossaire des Matériaux Composites Renforcés des Fibres d’origine Renouvelable“, 2006.
    Search in Google ScholarBack to article
  19. [19] Cheng, P. C. “Etude et optimisation de la réparation des composites stratifies par collage des patchs externes“. Thèse de doctorat, Université de Bourgogne, 2010.
    Search in Google ScholarBack to article
  20. [20] Wang, J., Rider, A. N., Heller, M., Kaye, R. “Theoretical and experimental research into optimal edge taper of bonded repair patches subject to fatigue loadings“. International Journal of Adhesion and Adhesives 25, pp. 410 – 426, 2006.
    Search in Google ScholarBack to article
  21. [21] Ait Said, A., Bey, K., Mzad, H. “Mechanical fatigue test of aluminium composite panel (acp) with aramid nida-core under cyclic bending“, Strojnícky časopis – Journal of Mechanical Engineering 70 (2), pp. 1 – 10, 2020. DOI: 10.2478/scjme-2020-0015
    Search in Google ScholarBack to article
  22. [22] Chavali, P. J., Ganga, B. T. “Effect of fiber orientation on mechanical and tribological properties of banana-reinforced composites“, Journal of failure analysis and prevention 21, pp. 1 – 8, 2021.
    Search in Google ScholarBack to article
  23. [23] Wang, H. W., Zhou, H. W., Gui, L. L., Ji, H. W., Zhang, X. C. “Analysis of effect of fiber orientation on Young’s modulus for unidirectional fiber reinforced composites“. Compos. B Eng 56, pp. 733 – 739, 2014.
    Search in Google ScholarBack to article
  24. [24] Sathish, P., Kesavan, R., Ramnath, B. V., Vishal, C. “Effect of fiber orientation and stacking sequence on mechanical and thermal characteristics of banana-kenaf hybrid epoxy composite“, Silicon 9 (4), pp. 577 – 585, 2017.
    Search in Google ScholarBack to article
  25. [25] Lasikun, D., Ariawan, E., Surojo, J., Triyono “Effect of fiber orientation on tensile and impact properties of Zalacca Midrib fiber-HDPE composites by compression molding“, in AIP Conference Proceedings, AIP Publishing 1931 (1), pp. 030060, 2018.
    Search in Google ScholarBack to article
  26. [26] Chavali, P. J., Taru, G. B. “Effect of Fiber Orientation on Mechanical and Tribological Properties of Banana-Reinforced Composites“, J Fail. Anal. and Preven 21. pp. 1 – 8, 2021. DOI: 10.1007/s11668-020-01048-9
    Search in Google ScholarBack to article
  27. [27] Wang, X., Khameneian, A., Dice, P., Chen, B., Shahbakhti, M., Naber, J. D., Archer, C., Qu, Q., Glugla, C., Huberts G. “Control-oriented model-based burn duration and ignition timing prediction with recursive-least-square adaptation for closed-loop combustion phasing control of a spark ignition engine“, in Dynamic Systems and Control Conference 59155, pp. V002T12A004. American Society of Mechanical Engineers, 2019.
    Search in Google ScholarBack to article
  28. [28] Doo, Y.Y., Nemkumar, B. “Numerical simulation on structural behavior of UHPFRC beams with steel and GFRP bars“, Computers and Concrete 16 (5), pp. 759 – 774, 2015. DOI: 10.12989/cac.2015.16.5.759
    Search in Google ScholarBack to article
  29. [29] Hemanth Kumar, C., Swamy, R. P. “Experimental Investigation on the Fatigue Behavior of Glass Fiber-Reinforced Epoxy Composites Under Rotating Bending Loads“, J Fail. Anal. and Preven 21, pp. 582 – 587, 2021. DOI: 10.1007/s11668-020-01105-3
    Search in Google ScholarBack to article
  30. [30] Achache, H., Boutabout, B., Benzerdjeb, A., Ouinas, D. “Evaluation of energy release rate of composites laminated with finite element method“, Structural Engineering and Mechanics 55 (1), pp. 191 – 204, 2015. DOI: 10.12989/sem.2015.55.1.191
    Search in Google ScholarBack to article
  31. [31] Arnab, Choudhury., Samar, Chandra Mondal., Susenjit Sarkar. “Effect of lamination angle and thickness on analysis of composite plate under thermo mechanical loading”, Strojnícky časopis - Journal of Mechanical Engineering 67 (1), pp. 5 – 22, 2017. DOI: 10.1515/scjme-2017-0001
    Search in Google ScholarBack to article
  32. [32] Lalit, R., Mayank, P., Ankur, K. “Natural fibers and biopolymers characterization: a future potential composite material“, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 33 – 50, 2018. DOI: 10.2478/scjme-2018-0004
    Search in Google ScholarBack to article
  33. [33] Vennapusa, V. B., Kolla, S., Devireddy, S. B. R. “Investigation on physical and mechanical properties of banana and palmyra fiber reinforced epoxy composites”, Strojnícky časopis – Journal of Mechanical Engineering 70 (2), pp. 167 – 180, 2020. DOI: 10.2478/scjme-2020-0029
    Search in Google ScholarBack to article
  34. [34] “ABAQUS/CAE Ver 6.9 User’s Manual”, Hibbitt, Karlsson & Sorensen, Inc; 2007.
    Search in Google ScholarBack to article
  35. [35] Hautier, M. “Analyse des réparations des matériaux composites : mise en œuvre d’un procédé par infiltration et étude du comportement mécanique“. Thèse de Doctorat de l’Université Toulouse III, 2010.
    Search in Google ScholarBack to article
  36. [36] Ban, C.S., Lee, Y.H., Choi, J.H. and Kweon, J.H. “Strength prediction of adhesive joints using the modified damage zone theory“, Compos. Struct 86 (1), pp. 96 – 100, 2008. DOI: 10.1016/j.compstruct..03.016
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/scjme-2022-0001 | Journal eISSN: 2450-5471 | Journal ISSN: 0039-2472
Journal RSS Feed
Language: English
Page range: 1 - 14
Published on: May 9, 2022
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Finite element method (FEM),
repair composite,
Stress intensity factor (SIF),
the damaged area ratio (D),
Von Mises Stress,
laminate
Related subjects:
Engineering,
Mechanical engineering,
Fundamentals of mechanical engineering,
Mechanics

© 2022 Mohamed Berrahou, Kaoula Amari, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 72 (2022): Issue 1 (April 2022)Next article