References
- [1] Balážikova, M., Sinay, J. “Implementation of Auditory and Non-Auditory Effects of Noise in the Risk Assessment Process in Mechanical Engineering”, Procedia Engineering 48, pp. 621 – 628, 2012.
- [2] Čulík, M., Jochim, S., Ondrejka, V. “Sound Insulation of Partition Wall and Ceiling in Panel Timber Frame Structure”. Akustika 31, pp. 145 – 152, 2019.
- [3] Flimel, M. “Possibilities of Active Reduction of Noise in the Workplace”, Akustika 28, pp. 27 – 31, 2017.
- [4] Chlebo, O., Šooš, Ľ., Žiaran, S., Musil, M. “Application of Vibro-acoustics in Subjective and Objective Assessment of Bearing Quality”. In: Proceedings of the International Conference Acoustics 2019, High Tatras 2019, pp. 203 – 208, 2019.
- [5] Žiaran, S., Musil, M., Chlebo, O., Šooš, L. “Design of Vibration and Noise Level Control Methodology for Double-row Bearings K982 AS of Car Water Pumps”. Research report of Mechanical Engineering Faculty Slovak University of Technology, Bratislava 2015.
- [6] Žiaran, S., Musil, M., Chlebo, O. “Determination of the Bearing Quality by Means of Vibro-acoustic Response”. In: Proceedings of Internoise/ASME NCAD Noise Control and Acoustics Division Conference 2015, Article Number: V001t01a004-1, 2015.
- [7] Šlesar, P., Jančo, R. “Strength and Dynamic Assessment of Cage and Bearing for Railway Carriage”, Strojnícky časopis - Journal of Mechanical Engineering 70 (1), pp. 127 – 134, 2020. DOI: 10.2478/scjme-2020-0012
- [8] Žiaran, S., Chlebo, O., Šooš, L. „Methodology of Objective Evaluation of Quality Bearings by Vibro-acoustics and its Comparison with a Subjective Method“, Akustika 37, pp. 58 – 66, 2020.
- [9] Žiaran, S., Chlebo, O., Čekan, M., Tuma, J. “Transmission of Vibrations through Vibration Isolators, Theory and Application”. The 15th IFTOMM World Congress, Krakow, Poland, Springer Nature Switzerland AG 2019, pp. 3995 – 4004, 2019.
- [10] Žiaran, S., Šooš, Ľ., Chlebo, O. “Primary Noise Control in the Work Environment by Increasing the Quality of Bearings and Effective Mounting of Machines”, Archives of Acoustics 45 (2), pp. 253 – 262, 2020.
- [11] Žiaran, S. “Analysis of the Causes of Dynamic Loading of the CIM WH9 Electric Motor During Braking with a Proposal of Measures to Eliminate the Causes“, Research report for EMERSON Nové Mesto nad Váhom 2006, 2006.
- [12] Šlesar, P., Jančo, R. “The Calculation of the Contact Force and the Contact Width of Shaft Seals”, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), pp. 123 – 130, 2019. DOI: 10.2478/scjme-2019-0010