References
- [1] Mahendran, S, Devarajan, R, Nagarajan, T, Majdi, A. “A review of microEDM”, Proceedings of the International MultiConference of Engineers and Computer Scientists, 2010.
- [2] Richard, J., Demellayer, R. “Micro-EDM-milling Development of new machining technology for micro-machining”, Procedia CIRP 6, pp. 292 – 296, 2013.
- [3] Bragança, MF, Rosa, AR, Dias, FM, Martins, AF., Alves, LL. “Experimental study of micro electrical discharge machining discharges”, Journal of Applied Physics 113 (23), pp. 233301 (1 – 14), 2013.
- [4] Karthikeyan, G, Ramkumar, J, Dhamodaran, S., Aravindan, S., “Micro electric discharge milling process performance: an experimental investigation”, International Journal of Machine Tools & Manufacture 50 (8), pp. 718 – 727, 2010.
- [5] Kibria, G, Sarkar, BR, Pradhan, BB., Bhattacharyya, B. “Comparative study of different dielectrics for micro-EDM performance during microhole machining of Ti-6Al-4V alloy”, The International Journal of Advanced Manufacturing Technology48, (5 – 8), pp. 557 – 570, 2010.
- [6] Dhanabalan, S, Sivakumar, K., Sathiyanarayanan, C. “Optimization of EDM process parameters with multiple performance characteristics for Titanium Grades”, European Journal of Scientific Research 68 (3), pp. 297 – 305, 2012.
- [7] Kadirvel, A, Hariharan, P., Gowri, S. “Experimental investigation on the electrode specific performance in Micro-EDM of Die-steel”, Materials and Manufacturing Processes 28 (4), pp. 390 – 396, 2013.
- [8] Pay Jun Liew, Jiwang Yan, Kuriyagawa, T. “Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDM”, International Journal of Machine Tools and Manufacture 76, pp. 13 – 20, 2014.
- [9] Sabur, A, Moudood, A, Ali, MY., Maleque, MA. “Effect of Micro-EDM parameters on material removal rate of nonconductive ZrO2 ceramic”, Applied Mechanics and Materials 465 – 466, pp. 1329 – 1333, 2014.
- [10] Kung, KY, Horng, JT., Chiang, KT. “Material removal rate and electrode wear ratio study on the powder mixed electrical discharge machining of cobalt-bonded tungsten carbide”, International Journal of Advanced Manufacturing Technology 40 (1 – 2), pp. 95 – 104, 2009.
- [11] Durillo, J, Garca, J, Nebro, A, Coello, C, Luna, F., Alba, E. “Multi-objective particle swarm optimizers: An experimental comparison”, 5th International Conference on Evolutionary MultiCriterion Optimization, pp. 495 – 509, 2009.
- [12] Somashekhar, KP., Ramachandran, N. J. “Optimization of material removal rate in micro-EDM using artificial neural network and genetic algorithms”, Materials and Manufacturing Processes 25 (6), pp. 467 – 475, 2010.
- [13] Mohamad, AB, Siddique, AN, Quadir, GA, Khan, ZA. Saini, VK. “Optimization of EDM parameters using Taguchi method”, Proceeding of International Conference on Applications and Design in Mechanical Engineering, 2012.
- [14] Pushpendra, S. B., Maheshwari, S., Sharma, C. “Multi-objective optimization of electric-discharge machining process using controlled elitist NSGA-II”, Journal of Mechanical Science and Technology 26 (6), pp. 1875 – 1883, 2012.
- [15] Praloy, S. D., Mishra “An improvement on NSGA-II for finding fast the better optimal solution in multi-objective optimization problem”, Advances in Intelligent Systems and Computing 308, pp. 105 – 116, 2015.
- [16] Phillip J Ross, “Taguchi Techniques for Quality Engineering” (2nd ed.), Tata McGraw Hill, New Delhi, 2005.
- [17] Goldberg, DE. “Genetic Algorithms in search, Optimization & Machine Learning”, Addison-Wesley, Indianapolis, 1989.
- [18] Khadar, B.S., Jagannadha, R.M., Murahari, K.O.L.L.I. “Multi-Objective Optimization of Process Parameters for Powder Mixed Electrical Discharge Machining of Inconel X-750 Alloy Using Taguchi-Topsis Approach”, Strojnícky časopis – Journal of Mechanical Engineering 71(1), pp.1 – 18, 2021. DOI: 10.2478/scjme-2021-0001
- [19] Manoj, M. et al. “Effect of machine feed rate on kerf-width, material removal rate, and surface roughness in machining of Al/SiC composite material with wire electrical discharge machine”, Strojnícky časopis – Journal of Mechanical Engineering 70 (1), pp. 81 – 88, 2020. DOI: 10.2478/scjme-2020-0008
- [20] Dwaipayan, D., Titas, N., Bandyopadhyay, A. “Parametric study for wire cut electrical discharge machining of sintered titanium.” Strojnícky časopis – Journal of Mechanical Engineering 69 (1), pp. 17 – 38, 2019. DOI: 10.2478/scjme-2019-0002