References
- [1] Lloyd, D. J. “The deformation of commercial Aluminum-Magnesium Alloys”, Metall. Mater. Trans. A 11, pp. 1287 – 1294, 1980.
- [2] Polmear, I. J. “Light Alloys: From Traditional Alloys to Nanocrystals”, 4th ed., Butterworth-Heinemann/Elsevier, UK, 2006.
- [3] Belov, I. A., Alabin, A. I. “Advanced Aluminum Alloys with Zirconium and Scandium,” Tsvetn. Met. 2, 99 – 106, 2007.
- [4] Thomas, W. M., Nicholas, E. D., Needham, J. C., Murch M. G., Templesmith, P., Dawes C. J. “Improvements to Friction Welding”, GB Patent Application No. 9125978.8, 1991.
- [5] Mishra, R. S., Ma, ZY. “Friction stir welding and processing”, Material Science Engineering R50, pp. 1 – 78, 2013.
- [6] Cavaliere, P. “Friction stir welding of Al alloys: analysis of processing parameters affecting mechanical behavior”, Procedia CIRP 11, pp. 139 – 144, 2005.
- [7] Knipstrom, K. E., Pekkari, B. “Friction stir welding process goes commercial [J]”, Welding Journal 76 (9), pp. 55 − 57, 1997.
- [8] Sato, Y. S., Park, S. H. C., Kokawa, H. “Microstructural factors governing hardness in friction-stir welds of solid–solution–hardened Al Alloys”, Metall. Mater. Trans A 32, pp. 3033 – 3042, 2001.
- [9] Norman, A. F., Hyde, K., Costello, F., Thompson, S., Birley, S., Prangnell, P. B., “Examination of the effect of Sc on 2000 and 7000 series aluminium alloy castings: for improvements in fusion welding”, Materials Science and Engineering: A 354 (1–2), pp. 188 – 198, 2003.
- [10] Mandal, N. R., “Aluminum Welding”, 2nd edition, Narosa Publishing Home Pvt. Ltd, Delhi., 2005.
- [11] Moataz, M., Attallah, Claire L. Davis, Martin Strangwood “Microstructure hardness relationships in friction stir welded AA5251”, J. Mater. Sci 42, pp. 7299 – 7306, 2007.
- [12] Jančo, R., Écsi, L, Élesztos., P. “FSW Numerical Simulation of Aluminium Plates by SYSWELD – Part II”, Strojnícky časopis – Journal of Mechanical Engineering 66 (2), pp. 29 – 36, 2016. DOI: 10.1515/scjme-2016-0016
- [13] Jančo, R., Écsi, L, Élesztos., P. “FSW Numerical Simulation of Aluminium Plates by SYSWELD – Part I.” Strojnícky časopis – Journal of Mechanical Engineering 66 (1), pp. 47 – 52, 2016. DOI: 10.1515/scjme-2016-0010
- [14] Santha Rao, D., Ramanaiah., N. “Process Parametrization for Producing AA6061/TIB2 Composites by Friction Stir Processing”, Strojnícky časopis – Journal of Mechanical Engineering 67 (1), pp. 101 – 118, 2017. DOI: 10.1515/scjme-2017-0011
- [15] Élesztos, P., Jančo, R., Voštiar, V. “Optimization of Welding Process Using A Genetic Algorithm”, Strojnícky časopis – Journal of Mechanical Engineering 68 (2), pp. 17 – 24, 2018. DOI: 10.2478/scjme-2018-0014
- [16] Sejč, P., Bučány, M., Zifčák, P. “Properties of FSW and MIG Welded Joints of AlSiMg Aluminium Alloy”, Strojnícky časopis – Journal of Mechanical Engineering 70 (2), pp. 141 – 152, 2020. DOI: 10.2478/scjme-2020-0027
- [17] Mallipudi, S., Nallu, R. “Effect of Scandium and Zirconium Additions on Mechanical Properties of Al–Mg–Mn Alloy”, Trans Indian Inst Met 72, pp. 227 – 238, 2019. DOI: 10.1007/s12666-018-1476-8
- [18] Bahuguna, S., Arya, P. K., Patel, V. K. “Mechanical and Abrasive Wear Properties of Friction Stir Welded Joints of Aluminum Alloy AA6061-T6 with/Without Nickel Coating”, Strojnícky časopis – Journal of Mechanical Engineering 70 (2), pp. 21 – 36, 2020. DOI: 10.2478/scjme-2020-0017
- [19] Duan Yu-lu, Qian Jian, Xiao Dan, Cui Xue-min, Xu Guo-fu,” Effect of Sc and Er additions on superplastic ductilities in Al-Mg-Mn-Zr alloy”, J. Cent. South Univ. 23, pp. 1283 − 1292, 2016.
- [20] Srinivasa Rao, M. Ramanaiah, N. “Optimization of Process Parameters for FSW of Al-Mg-Mn-Sc-Zr Alloy using CCD And RSM”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 195 – 224, 2018. DOI: 10.2478/scjme-2018-0035.