References
- [1] Ho, K.H, Newman, S.T, Rahimifard, S., Allen, R. D. “State of the art in wire electrical discharge machining (WEDM)”, International Journal of Machine Tools and Manufacture 44 (12–13), pp. 1247 – 1259, 2004.
- [2] Selvakumar, G, Thiruppathi, K. K, Selvaraj, M, Manohar, J. “Enhancing die corner accuracy using path modification strategy in wire electrical discharge machining of Monel 400”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 232 – 2, pp. 207 – 216, 2018.
- [3] Anshuman K., Kumar A., Vivekananda, K., Maity, KP. “Effect of wire electrode materials on die-corner accuracy for Wire Electrical Discharge Machining (WEDM) of Inconel 718”, Materials Today: Proceedings 5-5 (2), pp. 12641 – 12648, 2018.
- [4] Sanchez, J.A., Plaza, S., Ortega, N., Marcos, M., Albizuri, J. “Experimental and numerical study of angular error in wire-EDM taper-cutting”, International Journal of Machine Tools and Manufacture 48 (12 – 13), pp. 1420 – 1428, 2008.
- [5] Hsue W. J., Liao, Y. S., Lu, S. S. “Fundamental geometry analysis of wire electrical discharge machining in corner cutting”, International Journal of Machine Tools and Manufacture 39 (4), pp. 651 – 667, 1999.
- [6] Han, F., Zhang, J., Soichiro, I. “Corner error simulation of rough cutting in wire EDM”, Precision Engineering 31 (4), pp. 331 – 336, 2007.
- [7] Chen, Z., Huang, Y., Zhang, Z. et al. “An analysis and optimization of the geometrical inaccuracy in WEDM rough corner cutting”, Int J Adv Manuf Technol 74, pp. 917 – 929, 2014.
- [8] Mu-Tian Yan, Pin-Hsum Huang “Accuracy improvement of wire-EDM by real-time wire tension control”, International Journal of Machine Tools and Manufacture, 44 (7 – 8), pp. 807 – 814, 2004.
- [9] Chin-Teng Lin, I-Fang Chung, Shih-Yu Huang “Improvement of machining accuracy by fuzzy logic at corner parts for wire-EDM”, Fuzzy Sets and Systems 122 (3), 499 – 511, 2001.
- [10] Sadananda C., Souren M., Dipankar B. “An investigation on dimensional accuracy and surface topography in powder mixed WEDM using RSM and GRA-PCA”, Materials Today: Proceedings 44 (1), pp. 524 – 1530, 2021.
- [11] Kashif, I., Sadaf, Zr., Sarmad, A. K., Mudassar, R., Abdullah, A., Saqib, A., “Minimizing the corner errors (top and bottom) at optimized cutting rate and surface finish during WEDM of Al6061”, Engineering Science and Technology an International Journal 24 (4), pp. 1027 – 1041, 2021.
- [12] Arunbharathi, R., Ashoka, V. P., Jayasuryaa, J., Pranav, K., Harsha, V. N. “Optimization of WEDM process parameters for D3 die steel using RSM”, Materials Today: Proceedings 37 (2), pp. 2063 – 2069, 2021.
- [13] Zhi Chen, Hongbing Zhou, Zhaojun Yan, Fenglin Han, Hongzhi Yan “A new high-speed observation system for evaluating the spark location in WEDM of Inconel 718”, Journal of Materials Research and Technology 13, pp. 184 – 196, 2021.
- [14] Khadar, Basha Shaik, Jagannadha, Raju M. V. and Murahari, Kolli. “Multi-Objective Optimization of Process Parameters for Powder Mixed Electrical Discharge Machining of Inconel X-750 Alloy Using Taguchi-Topsis Approach”, Strojnícky časopis – Journal of Mechanical Engineering 71 (1), pp. 1 – 18, 2021. DOI: 10.2478/scjme-2021-0001
- [15] Dwaipayan, De, Titas, Nandi and Asish, Bandyopadhyay “Parametric Study for Wire Cut Electrical Discharge Machining of Sintered Titanium”, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), pp.17 – 38, 2019. DOI: 10.2478/scjme-2019-0002
- [16] Himanshu, Prasad Raturi, Lalta, Prasad, Mayank, Pokhriyal and Vineet, Tirth. “An Estimating the Effect of Process Parameters on Metal Removal Rate and Surface Roughness in WEDM of Composite Al6063/SiC/AlO by Taguchi Method”, Strojnícky časopis – Journal of Mechanical Engineering 67 (2), pp. 25 – 36, 2017. DOI: 10.1515/scjme-2017-0015