References
- [1] Handa, A., Chawla, V. “An Investigation on the Effect of Axial Pressures on the Mechanical Properties of Friction Welded Dissimilar Steels”, Advances in Mechanical Engineering 6, 639378, 2014. DOI: 10.1155/2014/639378
- [2] Caligulu, U., Yalcinoz, M., Kati, N., Balalan, Z., Islak, S. “The Effects of Rotation Speed and Friction Time for Joining of AISI 4340 – 2205 Steels by Friction Welding”, Metallofiz. Noveishie Tekhnol 37 (5), pp. 665 – 681, 2015.
- [3] Singh, P., Handa, A. “Mechanical Properties of Stellite-6 coated AISI 316L Stainless Steel”, Materials Engineering 22, pp. 173 – 179, 2015.
- [4] Arivazhagan N et al /Int.J. ChemTech Res. 6(1), pp 409 – 415, 2014.
- [5] Kimura, M., Suzuki, K., Kusaka, M., Kaizu, K. “Effect of friction welding condition on joining phenomena and mechanical properties of friction welded joint between 6063 aluminium alloy and AISI 304 stainless steel”, Journal of Manufacturing Processes 26, pp. 178 – 187, 2017. DOI: 10.1016/j.jmapro.2017.02.008
- [6] Ozdemir, Niyazi, Orhan, Nuri. “Microstructure and mechanical properties of friction welded joints of a fine-grained hypereutectoid steel with 4% Al”, Journal of Materials Processing Technology - J Mater Process Technol. 166, pp., 63 – 70, 2005. DOI: 10.1016/j.jmatprotec.2004.07.095
- [7] Şahin, M., Akata, H. E. “Joining with friction welding of plastically deformed steel”, Journal of Materials Processing Technology 142 (1), pp. 239 – 246, 2003. DOI: 10.1016/s0924-0136(03)00589-2
- [8] Ahmad Fauzi, M. N., Uday, M. B., Zuhailawati, H., Ismail, A. B. “Microstructure and mechanical properties of alumina-6061 aluminum alloy joined by friction welding”, Materials & Design 31 (2), pp. 670 – 676, 2010. DOI: 10.1016/j.matdes.2009.08.019
- [9] Cheniti, B., Miroud, D., Badji, R., Hvizdoš, P., Fides, M., Csanádi, T., Tata, M. “Microstructure and mechanical behavior of dissimilar AISI 304L/WC-Co cermet rotary friction welds”, Materials Science and Engineering: A. 2019. DOI: 10.1016/j.msea.2019.04.081
- [10] Li, X., Li, J., Liao, Z., Jin, F., Zhang, F., & Xiong, J. “Microstructure evolution and mechanical properties of rotary friction welded TC4/SUS321 joints at various rotation speeds”, Materials & Design 99, pp. 26 – 36, 2016. DOI: 10.1016/j.matdes.2016.03.037
- [11] Li, P., Li, J., Dong, H., Ji, C. “Metallurgical and mechanical properties of continuous drive friction welded copper/alumina dissimilar joints”, Materials & Design 127, pp. 311 – 319, 2017. DOI: 10.1016/j.matdes.2017.04.093
- [12] Sahin, M. “Joining with friction welding of high-speed steel and medium-carbon steel”, Journal of Materials Processing Technology 168 (2), pp. 202 – 210, 2005. DOI: 10.1016/j.jmatprotec.2004.11.015
- [13] Sahin, M., Akata, H. E., Gulmez, T. “Characterization of mechanical properties in AISI 1040 parts welded by friction welding”, Materials Characterization 58 (10), pp. 1033 – 1038, 2007. DOI: 10.1016/j.matchar.2006.09.008
- [14] Seli, H., Ismail, A. I. M., Rachman, E., Ahmad, Z. A. “Mechanical evaluation and thermal modelling of friction welding of mild steel and aluminium”, Journal of Materials Processing Technology 210 (9), pp. 1209 – 1216, 2010. DOI: 10.1016/j.jmatprotec.2010.03.007
- [15] Sketchley, P., Threadgill, P., Wright, I. “Rotary friction welding of an Fe3Al based ODS alloy”, Materials Science and Engineering: A 329 – 331, pp. 756 – 762, 2002. DOI: 10.1016/s0921-5093(01)01656-2
- [16] Song, Y., Liu, Y., Zhu, X., Yu, S., Zhang, Y. “Strength distribution at interface of rotary-friction-welded aluminum to nodular cast iron”, Transactions of Nonferrous Metals Society of China 18 (1), pp. 14 – 18, 2008. DOI: 10.1016/s1003-6326(08)60003-5
- [17] Vairis, A., Frost, M. “High frequency linear friction welding of a titanium alloy”, Wear 217 (1), pp. 117 – 131, 1998. DOI: 10.1016/s0043-1648(98)00145-8
- [18] Wang, M., Zhao, S., Wang, W., Li, Q., Luo, G.-N. “Preliminary results of CuCrZr/316L tube-to-tube junctions fabricated with rotary friction welding”, Fusion Engineering and Design 148, 111275, 2019. DOI: 10.1016/j.fusengdes.2019.111275
- [19] Wen, G. D., Ma, T. J., Li, W. Y., Wang, S. Q., Guo, H. Z., & Chen, D. L. “Strain-controlled fatigue properties of linear friction welded dissimilar joints between Ti–6Al–4V and Ti–6.5Al–3.5Mo–1.5Zr–0.3Si alloys”, Materials Science and Engineering: A 612, pp. 80 – 88, 2014. DOI: 10.1016/j.msea.2014.06.010
- [20] Li, P., Li, J., Salman, M., Liang, L., Xiong, J., Zhang, F. “Effect of friction time on mechanical and metallurgical properties of continuous drive friction welded Ti6Al4V/SUS321 joints”, Materials & Design (1980-2015) 56, pp. 649 – 656, 2014. DOI: 10.1016/j.matdes.2013.11.065
- [21] Handa, A., & Chawla, V. “Experimental Evaluation Of Mechanical Properties Of Friction Welded Dissimilar Steels Under Varying Axial Pressures”, Strojnícky časopis – Journal of Mechanical Engineering 66 (1), pp. 27 – 36, 2016. DOI: 10.1515/scjme-2016-0008