References
- [1] Bhattacharya, A. S., Sen, A., Das, S. “An investigation on the anti-loosening characteristics of threaded fasteners under vibratory conditions”, Mechanism and Machine Theory, pp. 1215 – 1225, 2010.
- [2] Gong, H., Liu, J., Ding, X. “Effect of ramp angle on the anti-loosening ability of wedge nylock nuts under vibration”, Journal of Mechanical Design, Transactions of the ASME 140 (7), 2018.
- [3] Broggiato G.B., Campana F., Cortese L. “The Chaboche nonlinear kinematic hardening model: calibration methodology and validation”, 43 (2), pp. 115 – 124, 2008.
- [4] Franulović M., Basan R., Prebil I. “Genetic algorithm in material model parameters’ identification for low-cycle fatigue” 45 (2), pp. 505 – 510, 2009.
- [5] Mahmoudi A.H., Pezeshki-Najafabadi S.M., Badnava H. “Parameter determination of Chaboche kinematic hardening model using a multi objective Genetic Algorithm”, Computational Materials Science 50 (3), pp. 1114 – 1122, 2011. DOI: 10.1016/j.commatsci.2010.11.010
- [6] Mahmoudi A.H., Badnava H., Pezeshki-Najafabadi S. M. “An application of Chaboche model to predict uniaxial and multiaxial ratcheting”, Procedia Engineering 10, pp. 1924 – 1929, 2011. DOI: 10.1016/j.proeng.2011.04.319
- [7] Badnava H., Pezeshki S. M., Fallah Nejad K., Farhoudi H. R. “Determination of combined hardening material parameters under strain controlled cyclic loading by using the genetic algorithm method”, Journal of Mechanical Science and Technology 26 (10), pp. 3067 – 3072, 2012. DOI: 10.1007/s12206-012-0837-1
- [8] Chaparro, B. M., Thuillier, S., Menezes, L. F., Manach, P. Y., Fernandes, J. V. “Material parameters identification: Gradient-based, genetic and hybrid optimization algorithms”, Computational Materials Science 44 (2), pp. 339 – 346, 2008. DOI: 10.1016/j.commatsci.2008.03.028
- [9] Nath, A., Ray, K. K., Barai, S.V. “Evaluation of ratcheting behaviour in cyclically stable steels through use of a combined kinematic-isotropic hardening rule and a genetic algorithm optimization technique”, International Journal of Mechanical Sciences 152, pp. 138 – 150, 2011. DOI: 10.1016/j.ijmecsci.2018.12.047
- [10] Shojaeefard M. H., Behnagh R. A., Akbari M., Givi M. K. B., Farhani F. “Modelling and Pareto optimization of mechanical properties of friction stir welded AA7075/AA5083 butt joints using neural network and particle swarm algorithm”, Material & Design 44, pp. 190 – 198, 2013. DOI: 10.1016/j.matdes.2012.07.025
- [11] Moslemi N., Gol Zardian M., Ayob A., Redzuan N., Rhee S. “Evaluation of sensitivity and calibration of the chaboche kinematic hardening model parameters for numerical ratcheting simulation”, Appl. Sci. 9 (12), 2578, 2019. DOI: 10.3390/app9122578
- [12] Parida A. K., Soren S., Jha R. N., Sadhukhan S. “Formability of Al-killed AISI 1040 medium carbon steel for cylindrical cup formation”, ISIJ International, pp. 610 – 618, 2016.
- [13] Agius D., Kajtaz M., Kourousis K. I., Wallbrink C., Hu W. “Optimising the multiplicative AF model parameters for AA7075 cyclic plasticity and fatigue simulation”, Aircraft Engineering and Aerospace Technology 90 (2), pp. 251 – 260, 2018.
- [14] Mises, R.V. “Mechanics of solid bodies in the plastically-deformable state”, Mathematisch-physikalische Klasse 1, pp. 582 – 592, 1913.
- [15] Qu, F., Z. Jiang, H. Lu “Effect of Mesh on Springback in 3D Finite Element Analysis of Flexible Microrolling”, Journal of Applied Mathematics, pp. 147 – 160, 2015.
- [16] Tong, J., Zhan, Z. L., Vermeulen, B. “Modelling of cyclic plasticity and viscoplasticity of a nickel-based alloy using Chaboche constitutive equations”, International Journal of Fatigue 26 (8), pp. 829 – 837, 2004.
- [17] Ramezansefat, H., Shahbeyk, S. “The Chaboche hardening rule: A re-evaluation of calibration procedures and a modified rule with an evolving material parameter”, Mechanics Research Communications 69, pp. 150 – 158, 2015. DOI: 10.1016/j.mechrescom.2015.08.003
- [18] Hassan, T., Kyriakides, S. “Ratcheting in cyclic plasticity, part i: Uniaxial behaviour”, International Journal of Plasticity 8 (1), pp. 91 – 116, 1992. DOI: 10.1016/0749-6419(92)90040-J
- [19] MD Zahid H., Moshiur R., MD. Samiul R., Limon S., Souvik R. “Design optimization of stair climbing cart for developing countries”, Strojnícky časopis – Journal of Mechanical Engineering 70 (1), pp.1 – 16, 2020. DOI: 10.2478/scjme-2020-0001