Multi-Objective Optimization of Process Parameters for Powder Mixed Electrical Discharge Machining of Inconel X-750 Alloy Using Taguchi-Topsis Approach
References
- [1] Ho, K. H., Newman, S. T. “State of the art electrical discharge machining (EDM)”, International Journal of Machine Tools and Manufacture 43 (13), pp.1287 – 1300, 2003.
- [2] Manjaiah, M., Narendranath, S., Basavarajappa, S., Gaitonde, V. N. “Effect of electrode material in wire electro discharge machining characteristics of Ti50Ni50xCuxshape memory alloy”, Precision Engineering 44, pp. 68 – 77, 2015.
- [3] Kolli, M., Kumar, A. “Effect of dielectric fluid with surfactant and graphite powder on Electrical Discharge Machining of titanium alloy using Taguchi method”, Engineering Science and Technology, an International Journal 18, pp. 524 – 535, 2015.
- [4] Jyothimurugan, R., Amrithagadeswaran, K. S. “Performance of additive mixed kerosene - Sovertherm in Electrical discharge machining of 400”, Materials and Manufacturing Processes 31 (4), pp. 432 – 438, 2016.
- [5] Kuraichen, B., Mathew, J. “Effect of power mixed dielectric on material removal and surface modification in micro electric discharge machining of Ti-6AL-4V”, Materials and Manufacturing Processes 31(4), pp.439-446, 2016.
- [6] Tiwary, A. P., Pradhan, B. B., Bhattacharyya, B. “Influence of various metal powder mixed dielectric on micro-EDM characteristics of Ti-6Al-4V”, Materials and Manufacturing Processes 34 (10), pp. 1103 – 1119, 2019.
- [7] Yadav, V.K., Kumar, P., Dvivedi, A. “Performance enhancement of rotary tool near-dry EDM of HSS by supplying oxygen gas in the dielectric medium”, Materials and Manufacturing Processes 34 (16), pp. 1832 – 1846, 2019.
- [8] Kolli, M., Kumar, A. “Assessing the Influence of Surfactant and B4C Powder Mixed in Dielectric Fluid on EDM of Titanium Alloy”, Silicon 11 (4), pp. 1731 – 1743, 2019.
- [9] Kolli, M., Kumar, A. “Surfactant and graphite powder–assisted electrical discharge machining of titanium alloy”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231 (4), pp. 641 – 657, 2017.
- [10] Talla, G., Gangopadhyay, S., Biswas, C.K. “Multi response optimization of powder mixed electric discharge machining of aluminum/alumina metal matrix composite using grey relation analysis”, Procedia Materials Science 5, pp. 1633 – 1639, 2014.
- [11] Roy, C., Syed, K. H., Kuppan, P. “Machinablity of Al/10% SiC/2.5% TiB2 Metal Matrix Composite with Powder-mixed Electrical Discharge Machining”, Procedia Technology 25, pp. 1056 – 1063, 2016.
- [12] Bhuyan, R. K., Routara, B. C., Parida, A. K. “An approach for optimization the process parameter by using TOPSIS Method of Al–24% SiC metal matrix composite during EDM”, Materials Today: Proceedings 2 (4 - 5), pp. 3116 – 3124, 2015.
- [13] Kumar, N.M., Kumaran, S.S., Kumaraswamidhas, L.A. “An investigation of mechanical properties and material removal rate, tool wear rate in EDM machining process of AL2618 alloy reinforced with Si3N4, AlN and ZrB2 composites”, Journal of Alloys and Compounds 650, pp.318-327, 2015.
- [14] Khanna, R., Kumar, A., Garg, M. P., Singh, A., Sharma, N. “Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory”, Journal of Industrial Engineering International 11 (4), pp. 459 – 472, 2015.
- [15] Kolli, M., Kumar, A. “Optimization of the parameters for the surfactant-added EDM of a Ti-6Al-4V alloy using the Gra-Taguchi method”, Materiali in Tehnologije 50 (2), pp. 229 – 238, 2016.
- [16] Wang, C. C., Yan, B. H. “Blind-hole drilling of Al2O3/6061Al composite using rotary electro-discharge machining”, Journal of materials processing technology 102 (1-3), pp. 90 – 102, 2000.
- [17] Ram Prasad, A.V.S., Ramji, K., Kolli, M., Vamsi Krishna, G. “Multi-response optimization of machining process parameters for wire electrical discharge machining of lead-induced Ti-6Al-4V alloy using AHP–TOPSIS method”, Journal of Advanced Manufacturing Systems, 18 (02), pp. 213 – 236, 2019.
- [18] Yoon, K., Hwang, C. L. “Multiple Attribute Decision Making: Methods and Applications”, Springer: Berlin/Heidelberg, Germany, 1981.
- [19] Lan, T. S. “Taguchi optimization of multi-objective CNC machining using TOPSIS” Information Technology Journal 8 (6), pp. 917 – 922, 2009.
- [20] De, D. W., Nandi, T. I., Bandyopadhyay, A. S. “Parametric study for wire cut electrical discharge machining of sintered titanium”, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), 17 – 38, 2019. DOI: 10.2478/scjme-2019-0002
- [21] Modi, M. A., Agarwal, G. O., Chaugaonkar, S. D., Bhatia, U. M., Patil, V. E. “Effect of machine feed rate on kerf-width, material removal rate, and surface roughness in machining of Al/SiC composite material with wire electrical discharge machine”, Strojniski Vestnik / Journal of Mechanical Engineering 70(1), pp. 81 – 88, 2020.
Language: English
Page range: 1 - 18
Published on: Oct 8, 2021
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Related subjects:
© 2021 Basha Shaik Khadar, Raju M. V. Jagannadha, Kolli Murahari, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.