References
- [1] Cooper, W. E. “The significance of the tensile test to pressure vessel design”, Weld J-Weld Res., pp.49 – 56, 1957.
- [2] Svensson, N. L. “The bursting pressure of cylindrical and spherical pressure vessels”, Trans ASME J. Appl. Mech. 80 (3), pp. 89 – 96, 1958.
- [3] Rajan, K. M., Deshpande, P. U. and Narasimhan, K. “Experimental studies on bursting pressure of thin-walled flow formed pressure vessels”, J. Mater. Process Technol., pp. 125 – 126, 228 – 234, 2002. DOI: 10.1016/S0924-0136(02)00298-4
- [4] Zhu, X. K. and Leis, B. N. “Plastic collapse assessment method for unequal wall transition joints in transmission pipelines”, J. Pres. Ves. Technol. 127 (4), pp. 449 – 456, 2005. DOI: 10.1115/1.2043197
- [5] Zhu, X. K. and Leis, B. N. “Average shear stress yield criterion and its application to plastic collapse analysis of pipelines”, Int. J. Pres. Ves. Piping 83(9), pp. 663 – 671, 2006. DOI: 10.1016/j.ijpvp.2006.06.001
- [6] Wang, L. Z., Zhang, Y. Q. “Plastic collapse analysis of thin-walled pipes based on unified yield criterion”, Int. J. Mech. Sci. 53 (5), pp. 329 – 406, 2011. DOI: 10.1016/j.ijmecsci.2011.02.004
- [7] Christopher, T., Rama Sarma, B. S. V., Govindan Potti, P. K., Nageswara Rao, B., Sankarnarayanasamy, K. “A Comparative Study on Failure Pressure Estimations of Unflawed Cylindrical Vessels”, Int. J. Pressure Vessels Piping 79 (1), pp. 53 – 66, 2002. DOI: 10.1016/S0308-0161(01)00126-0
- [8] Mihelová, S., Frydrýšek, K., Jančo, R. “Solution of a Gas Pipeline Buried in Ground by Stochastic Approach“, Strojnícky časopis – Journal of Mechanical Engineering 70 (1), pp. 103 – 114, 2020. DOI: 10.2478/scjme-2020-0010
- [9] Chmelko, V., Krššák, P. “The elasto-plastic state solution of a heavy-wall cylindrical pressure vessel using bilinear stress-strain model. Part 1: Derivation of analytical relations“, Strojnícky časopis – Journal of Mechanical Engineering 64 (1), pp. 51 – 62, 2013.
- [10] Shahabi, M., Esmaeilnejad, M., Ghasemi, A. “A thin-walled tube subjected to combined internal pressure and axial load under different loading paths“, Strojnícky časopis – Journal of Mechanical Engineering 63 (5-6), pp. 307 – 316, 2012.
- [11] Law, M., Bowie, G. and Fletcher, L. “Burst pressure and failure strain in pipeline”, Part 2: comparison of burst pressure and failure-strain formulas, J. Pipeline Integrity 3 (2), pp. 102 – 106, 2004.
- [12] Zhu, X.-K., Leis, B. N. “Evaluation of burst pressure prediction models for line pipes”, International Journal of Pressure Vessels and Piping, pp. 1 – 13, 2011. DOI: 10.1016/j.ijpvp.2011.09.007
- [13] Lankford W. D., Saibel, E. “Some problems in unstable plastic flow under biaxial tension”, Metals Technol., pp. 22 – 38, 1947.
- [14] Mellor, P. B. “Tensile instability in thin-walled tubes”, J. mech. Engng Sci. 4 (3), pp. 251 – 256, 1962. DOI: https://doi.org/10.1243/JMES_JOUR_1962_004_034_02
- [15] Monoshkov, A. N. Pykhov, S. I., Pustin, I. A. “Plasticheskaya ustoychivost i eye rol’ v otsenke prochnosti trub”, Proizvodstvo trub s pokrytiyami, otdelka i kontrol kachestva trub. Metallurgiya. pp. 77 – 81, 1972.
- [16] Kurkin, S. A. “Prochnost svarnykh tonkostennykh sosudov, rabotayushchikh pod davleniyem”, 183 p., 1976.
- [17] Kovalchuk, B. I. “K voprosu o potere ustoychivosti plasticheskogo deformirovaniya obolochek”, Problemy prochnosti. №5. pp. 11 – 16, 1983.
- [18] Kollinz, D. “Povrezhdenie materialov v konstrukciyah. Analiz, predskazanie, predotvrashchenie”, 624 p., 1984. Available at: http://books.totalarch.com/n/3598 [Accessed: 20.03.20]
- [19] Borodavkin. P. P. “Sooruzheniye magistralnykh truboprovodov” / P.P. Borodavkin, V.L. Berezin. M.: Nedra. 471 p. 1987.
- [20] Degtyarev V. P. “Deformatsii i razrusheniye v vysokonapryazhennykh konstruktsiyakh”. M.: Mashinostroyeniye. 105 p., 1987.
- [21] “Sistemnaya nadezhnost truboprovodnogo transporta uglevodorodov” / V.D. Chernyayev. K.V. Chernyayev. V.L. Berezin i dr. M.: Nauka. 516 p., 1997.
- [22] Dilman. V. L., Ostsemin, A. A. “O vliyanii dvukhosnosti nagruzheniya na nesushchuyu sposobnost trub magistralnykh gazonefteprovodov” Izv. RAN. Mekhanika tverdogo tela. №5, pp. 179–185, 2000.
- [23] Updike, D. P. Kalnins, A. “Tensile plastic instability of axisymmetric pressure vessels”, J. Pres. Ves. Technol. 120 (1): pp. 6 – 11, 1998. DOI: 10.1115/1.2841888
- [24] Reddy, J. N. “Theory and analysis of elastic plates and shells”, CRC Press, Taylor and Francis. 2007. Available at: http://mechanics.tamu.edu/wp-content/uploads/2016/08/11-Theory-and-Analysis-of-Elastic-Plates.pdf [Accessed: 23.05.20]
- [25] Nadai A. “Plastichnost i razrusheniye tverdykh tel. Tom 1. “ Pod red. G.S. Shapiro. v 2-kh tomakh. Moskva: Inostrannaya literature, 647 p., 1954.
- [26] Jones, B. H., Mellor, P. B. “Plastic flow and instability behaviour of thin-walled cylinders subjected to constant-ratio tensile stress“, Journal of Strain Analysis 2 (1), pp. 62 – 72, 1967. DOI: 10.1243/03093247V021062
- [27] Kozbur H. “Prediction technique for thin-walled cylindrical tubes boundary state“, Scientific Journal of TNTU (Tern.) 94 (2), pp. 145 – 155, 2019. DOI: 10.33108/visnyk_tntu2019.02.145
- [28] Law, M., “Use of the cylindrical instability stress for blunt metal loss defects in linepipe”, International Journal of Pressure Vessels and Piping 82, pp. 925 – 928, 2005. DOI: 10.1016/j.ijpvp.2005.04.002
- [29] Kozbur, H., Shkodzinsky, O., Kozbur, I. “Construction of a generalized hardening curve for isotropic plastic metal materials“, Scientific Bulletin of I.-Fr. NTU of Oil and Gas 1 (48), pp. 38 – 46, 2020. DOI: 10.31471/1993-9965-2020-1(48)-38-46