Research of Maximum Stress Zones in Circular Plates with Loades Concentrated Force

Konieczny Mateusz; Achtelik Henryk; Gasiak Grzegorz

doi:10.2478/scjme-2020-0022

Abstract

The paper presents numerical and experimental analysis of the state of stress in a circular perforated plate, free supported or fixed on entire premier and loaded concentrated force. This type of plate have found applications in the field of chemical equipment, pressure tanks and box conveyors. The use of the finite element method for numerical calculations enables accurate location of stress concentration zones in a perforated plate and allows to determine stress values around these hole.

References

[1] Chudzik, A., Świniarski, J. “Effect of changes in the thickness of a perforated plate of the heat exchanger on its structural stability”, Journal of Theoretical and Applied Mechanics 42(2), pp. 325 – 334, 2004.
Search in Google Scholar Back to article
[2] www.famet.com.pl 11.08.2018.
Search in Google Scholar Back to article
[3] Pástor, M., Čarák, P., Gomory, I. “The assessment of the residual stresses influence on generation of the infringement in shape-complex supporting members”, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), pp. 85 – 96, 2019. DOI: 10.2478/scjme-2019-0007
Search in Google Scholar Back to article
[4] Paška, Z., Fojtík, F., Ferfecki, P. “Full field evaluation of the stress tensor components in 2D photoelasticity via computer software”, Strojnícky časopis – Journal of Mechanical Engineering 66 (2), pp. 63 – 66, 2016. DOI: 10.1515/scjme-2016-0019
Search in Google Scholar Back to article
[5] Bhattacharya, A., Venkat, R. “Peak stress multipliers for thin perforated plates with square arrays of circular hole”, International Journal of Pressure Vessels and Piping 80, pp. 379 – 388, 2003.
Search in Google Scholar Back to article
[6] Bhattacharya, A., Venkat, R. “Yield Surfaces for Perforated Plates with Square Arrays of Holes”, Nuclear Engineering and Design 231, pp. 219 – 233, 2004.
Search in Google Scholar Back to article
[7] Andh, U., Chavan, S., Kulkarni, S., Khurd, S. “Stress analysis of perforated plates under uniaxial compression using FEA and photoelasticity”, International Research Journal of Engineering and Technology 3 (11), pp. 239 – 244, 2016.
Search in Google Scholar Back to article
[8] Andh, U., Chavan, S., Kulkarni, S. “Stress analysis of perforated plates under uniaxial compression using experimentation and finite element analysis”, International Journal of Current Engineering and Technology 7 (2), pp. 431 – 437, 2017.
Search in Google Scholar Back to article
[9] Gasiak, G., Ledwoń, W. “Analiza numeryczna stanu naprężenia i ugięcia płyt perforowanych obciążonych siłą skupioną”, Górnictwo odkrywkowe 55 (4), pp. 250 – 253, 2014. (in Polish).
Search in Google Scholar Back to article
[10] Achtelik, H., Gasiak, G., Grzelak, J. “Strength tests of axially symmetric perforated plates for chemical reactors: Part 1 - The simulation of stress state”, International Journal of Pressure Vessels and Piping 85, pp. 248 – 256, 2008.
Search in Google Scholar Back to article
[11] Gomez, E., Ruiz, R., Wilson, R. “Asme section III stress analysis of a heat exchanger tubesheet with a misdrilled hole and irregular or thin ligaments”, Proceedings of the ASME 2013 Pressure Vessels and Piping Conference 14 - 18 July, Paris, France, pp. 1 – 8, 2013.
Search in Google Scholar Back to article
[12] Achtelik, H., Gasiak, G., Grzelak, J. “Strength tests of axially symmetric perforated plates for chemical reactors: Part 2 – Experiments”, International Journal of Pressure Vessels and Piping 85, pp. 257 – 264, 2008.
Search in Google Scholar Back to article
[13] Ledwoń, W., Achtelik, H. “Experimental Analysis of the State of Stress of the Axisymetric Perforated Plateds Loaded with Hydrostatic Pressure”, Proceedings of the 13th International Scientific Conference, Computer Aided Engineering, Polanica Zdrój, pp. 331 – 341, 2016.
Search in Google Scholar Back to article
[14] El-Sawy, K. M., Nazmy, A. A., Mautini, M. J. “Elasto-plastic buckling of perforated plates uniaxial compression”, Thin – Walled Structures 42, pp. 1083 – 1101, 2004.
Search in Google Scholar Back to article
[15] Minguez J. M., Vogwell, J. “Plater with holes under laternal load pressure”, Engineering Failure Analysis 4, pp. 299 – 315, 1998.
Search in Google Scholar Back to article
[16] Konieczny, M. “Numeryczna analiza stanu naprężenia w kołowosymetrycznej płycie z otworem centralntm przy dwóch wariantach obciążenia”, Zagadnienia Aktualnie Poruszane przez Młodych Naukowców 14 Kraków, 2019. ISBN: 978-83-63058-87-6 178-184 (in Polish).
Search in Google Scholar Back to article
[17] Konieczny, M., Gasiak, G. “State of Stress in the Plate with Slot at Biaxial Load”, Conference Proceedings Fatigue Failure and Fracture Mechanics XXVII, 2018. ISSN: 978-0-7354-1750-2 1-9.
Search in Google Scholar Back to article
[18] Konieczny, M., Gasiak, G. “Research of maximum stresses zones in circular perforated plates made of S235JR steel loaded with concentrated force”, Inżynieria Materiałowa – Materials Engineering 2 (228), pp. 39 – 46, 2019.
Search in Google Scholar Back to article
[19] Konieczny, M., Achtelik, H., Gasiak, G. “Finite Element Analysis (FEA) and experimental stress analysis in circular perforated plates loaded with concentrated force”, Frattura ed Integrità Strutturale 51, pp. 164 – 173, 2020.
Search in Google Scholar Back to article
[20] Real, M., Isoldi, L. A., Damas A. P., Helbig, D. “Elastic and elasto-plastic buckling analysis of perforated steel plates”, Vetor 23 (2), pp. 61 – 70, 2013.
Search in Google Scholar Back to article
[21] Konieczny, M., Gasiak, G. “Badanie wpływu zamocowania kołowej płyty perforowanej na koncentrację naprężenia w warunkach działania ciśnienia hydrostatycznego”, Zeszyty Naukowe Politechniki Rzeszowskiej – Scientific Letters of Rzeszow University of Technology 299 (1 – 2), pp. 41 – 52, 2019. (in Polish).
Search in Google Scholar Back to article
[22] Saraçoğlu, M., Albayrak, U. “Linear static analysis of perforated plates with round and staggered holes under their self-weights”, Research of Engineering Structures and Materials 2 (1), pp. 39 – 47, 2016.
Search in Google Scholar Back to article
[23] www.mesco.com.pl 15.04.2017.
Search in Google Scholar Back to article
[24] Jakubowicz, A., Orłoś, Z. “Wytrzymałość materiałów”, WNT Warszawa, 1984. (in Polish).
Search in Google Scholar Back to article

Research of Maximum Stress Zones in Circular Plates with Loades Concentrated Force

Abstract

Paradigm

My account