References
- [1] Lieskovská, Z., Lényiová, P. editors “Spáva o stave životného prostredia Slovenskej republiky v roku 2018”, Ministerstvo životného prostredia Slovenskej republiky, Bratislava, (“Report on the state of the environment of the Slovak Republic in 2018”, Ministry of the Environment of the Slovak Republic, Bratislava, 2019), 2019. ISBN 978-80-8213-007-5.
- [2] Higman, Ch. “State of the Gasification Industry – the Updated Worldwide Gasification Database”, 2013 International Pittsburgh Coal Conference, Beijing, China, 2013.
- [3] Ramos, A., Teixeira, C. A., Rouboa, A. “Environmental Assessment of Municipal Solid Waste by Two-Stage Plasma Gasification“, Energies 12 (1), 137, 2019. DOI: 10.3390/en12010137
- [4] Orr, D., Maxwell, D. “A Comparison of Gasification and Incineration of Hazardous Wastes – Report”, 2000, DCN 99.803931.02
- [5] De Filippis, P., Borgianni, C., Paolucci, M., Pochetti, F. “Prediction of syngas quality for two-stage gasification of selected waste feedstocks”, Waste Management 24 (6), pp. 633 – 639, 2004. DOI: 10.1016/j.wasman.2004.02.014
- [6] Durmusoglu, E., Corapcioglu, M. Y., Tuncay, K. “Landfill Settlement with Decomposition and Gas Generation”, Journal of Environmental Engineering 131 (9), 2005. DOI: 10.1061/(ASCE) 0733-9372(2005)131:9(1311)
- [7] Oboirien, B. O., North, B. C. “A review of waste tyre gasification”, Journal of Environmental Chemical Engineering 5 (5), pp. 5169 – 5178, 2017. DOI: 10.1016/j.jece.2017.09.057
- [8] Kapilan. N., Jullya, N. “Studies on Improvement of Performance of Compression Ignition Engine Fuelled with Mixture of Honge Biodiesel and Tire Pyrolysis Oil”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 15 – 24, 2018. DOI: 10.2478/scjme-2018-0002
- [9] Laurence, L. C., Ashenafi, D. “Syngas Treatment Unit for Small Scale Gasification - Application to IC Engine Gas Quality Requirement”, Journal of Applied Fluid Mechanics 5 (1), pp. 95 – 103, 2012.
- [10] Bates, R. P., Dölle, K. “Syngas Use in Internal Combustion Engines – A Review”, Advances in Research 10 (1), pp. 1 – 8, 2017.
- [11] Milne, T. A., Evans, R. J., Abatzoglou, N. “Biomass gasifier “Tars”: Their Nature, Formation and Conversion. US: National Renewable Energy Laboratory; NREL/TP-570-25357, pp. 37 – 38, 1998.
- [12] Duan, J., Liu, F., Sun, B. “Backfire control and power enhancement of a hydrogen internal combustion engine”, International Journal of Hydrogen Energy 39 (9), pp. 4581 – 4589, 2014. DOI: 10.1016/j.ijhydene.2013.12.175
- [13] MacCarley, C. A., Van Vorst, W. D. “Electronic Injection Techniques for Hydrogen Powered I. C. Engines”, International Journal of Hydrogen Energy 5 (2), pp. 179 – 203, 1980. DOI: 10.1016/0360-3199 (80)90095-6
- [14] Chríbik, A., Polóni, M., Minárik, M. “Influence of Selected Synthesis Gas Component on Internal Parameters of Combustion Engine”, Strojnícky časopis – Journal of Mechanical Engineering 69 (4), pp. 25 – 32, 2019. DOI: 10.2478/scjme-2019-0040
- [15] Popardovský, V. “Optimization of Vehicle Suspension Neural Model”, In: Proc. of the 22nd International Scientific Conference TRANSPORT MEANS 2018, ISSN 1822-296X, Trakai, Lithuania, pp. 1361 – 1364, 2018.
- [16] Popardovský, V., Popardovská, E. “Vehicle Suspension Control Based on PID Controller Adapted by Feed-Forward Neural Network”, In: Zeszyty Naukowe INSTITUTU POJAZDÓW, ISSN 1642-347X,, Warsaw University of Technology, pp. 99 – 107, 2017.
- [17] Merker, G. P., Schwarz, Ch., Teichmann, R. “Combustion Engines Development: Mixture Formation, Combustion, Emissions and Simulation”, Springer-Verlag Berlin Heidelberg, 2012. DOI: 10.1007/978-3-642-14094-5