Performance Evaluation of Surface Modified Nano Al2o3 (P) Reinforced AZ91E Composites Under Impact and Fatigue Loading Conditions

Sameer, Kumar D; Suman, K N S; Poddar, Palash; Tara, Sasanka C

doi:10.2478/scjme-2020-0003

Abstract

This paper confers to compare the behavior of AZ91E, AZ91E with 2 wt. % plain and surface modified alumina reinforced composites under different loading conditions. The composites were prepared and specimens were cut in accordance with standard procedures to conduct impact and fatigue tests. Surface modified alumina reinforced AZ91E magnesium based composites resulted in improved impact and fatigue strength because of good interactions between the matrix and reinforcement. The results are discussed.

References

[1] Manoj, G., Sharon, N. M. L. “Magnesium, Magnesium Alloys, and Magnesium Composites”, WILEY Publishers, 2011, ISBN: 978-0-470-49417-2
Search in Google Scholar Back to article
[2] Sameer Kumar, D., Tara Sasanka, C., Ravindra, K., Suman, K.N.S. “Magnesium and its alloys in automotive applications – A Review”, American Journal of Materials Science and Technology 4 (1), pp. 12 – 30, 2015. DOI: 10.7726/ajmst.2015.1002
Search in Google Scholar Back to article
[3] Avedesian, M. M., Baker, H. “ASM Specialty HANDBOOK - Magnesium & Magnesium Alloys”, ASM International, 1999.
Search in Google Scholar Back to article
[4] Sameer Kumar, D., Tara sasanka, C. “Magnesium and its Alloys for Automotive” in Lightweight and Sustainable Materials for Automotive Applications, CRC Press (Taylor & Francis Group), USA, pp. 329 – 368, 2017. ISBN 9781498756877.
Search in Google Scholar Back to article
[5] Leon, C. A., Drew, R. A. L. “Preparation of nickel-coated powders as precursors to reinforce MMCs”, J. Mater. Sci. 35, pp. 4763 – 4768, 2000. DOI: 10.1023/A:1004860326071
Search in Google Scholar Back to article
[6] Jamal-Omidi, M., Mohammadi S. M. R. “Investigation of Defect Effects on Adhesively Bonded Joint Strength Using Cohesive Zone Modeling”, Strojnícky časopis – Journal of Mechanical Engineering 68 (3), pp. 5 – 24, 2018. DOI: 10.2478/scjme-2018-0023
Search in Google Scholar Back to article
[7] Leon, C. A., and Drew, R. A. L. “The influence of nickel coating ´on the wettability of aluminum on ceramics”, Composites Part A: Applied Science and Manufacturing 33 (10), pp. 1429 – 1432, 2002. DOI: 10.1016/S1359-835X(02)00161-6
Search in Google Scholar Back to article
[8] Vinay Kumar Patel, Komal Rani. “Mechanical and Wear Properties of Friction Stir Welded 0–6Wt% nAl2O3 Reinforced Al-13Wt%Si Composites”, Strojnícky časopis – Journal of Mechanical Engineering 67 (1), pp. 77 – 86, 2017. DOI: 10.1515/scjme-2017-0008
Search in Google Scholar Back to article
[9] Lloyd. D. J. “Particle reinforced Aluminum and Magnesium Matrix Composites”, Int. Mater. Rev. 39 (1), pp. 1 – 23, 1994. DOI: 10.1179/imr.1994.39.1.1
Search in Google Scholar Back to article
[10] Pang, J. N. et al. “Significance of sensitization process in electroless deposition of Ni on nano sized Al2O3 powders”, Ceram. Int. 42 (3), pp. 4491 – 4497, 1994. DOI: 10.1016/j.ceramint.2015.11.137
Search in Google Scholar Back to article
[11] Sameer Kumar D, Suman, K.N.S., Poddar, P. “Effect of particle morphology of Ni on the mechanical behavior of AZ91E-Ni coated nano Al2O3 composites”, Material Research Express 4, 066505, 2017. DOI: 10.1088/2053-1591/aa6fe4
Search in Google Scholar Back to article
[12] Sameer Kumar, D., et al. “Microstructure, mechanical response and fractography of AZ91E/Al2O3 (p) nano composite fabricated by semi solid stir casting method”, Journal of Magnesium and Alloys 5 (1), pp. 48 – 55, 2017. DOI: 10.1016/j.jma.2016.11.006
Search in Google Scholar Back to article
[13] Bocko, J., Lengvarský, P., Pástor, M. “Estimation of Material Properties of Carbon Nanotubes Using Finite Element Method”, Strojnícky časopis – Journal of Mechanical Engineering 69 (2), pp.7 – 14, 2019. DOI: 10.2478/scjme-2019-0014
Search in Google Scholar Back to article
[14] Sameer Kumar, D., Suman, K.N.S., Kumar, P. R. “A study on electroless deposition of nickel on nano Alumina powder under different sensitization conditions”, International Journal of Advanced Science and Technology (IJAST) 97, pp. 59 – 68, 2016. DOI: 10.14257/ijast.2016.97.06
Search in Google Scholar Back to article
[15] Lakshmi Chaitanya, K., Srinivas, K. “Sensitive analysis on selection of piston material using MADM techniques”, Strojnícky časopis – Journal of Mechanical Engineering 69 (4), pp. 45 – 56, 2019. DOI: 10.2478/scjme-2019-0042
Search in Google Scholar Back to article
[16] Swapna, D., Srinivasa Rao, Ch., Kumar, S., Radhika, S. “AHP and TOPSIS based selection of aluminium alloy for automobile panel”, Journal of Mechanical and Energy Engineering 3(1), pp. 43 – 50, 2019. DOI: 10.30464/jmee.2019.3.1.43
Search in Google Scholar Back to article
[17] Sameer Kumar, D., Suman K. N. S. “Selection of Magnesium Alloy by MADM Methods for Automobile Wheels”, International Journal of Engineering and Management 4(2), pp. 31 – 41, 2014. DOI: 10.5815/ijem.2014.02.03
Search in Google Scholar Back to article
[18] Poddar, P., Mukherjee, S., Sahoo, K. L. “The microstructure and mechanical properties of SiC reinforced Magnesium based composites by Rheocasting process”, Journal of Materials Engineering and Performance 18, pp. 849 – 855, 2009. DOI: 10.1007/s11665-008-9334-1
Search in Google Scholar Back to article
[19] Poddar, P., Srivastava, V.C., De, P.K., Sahoo, K.L. “Processing and mechanical properties of SiC reinforced cast magnesium matrix composites by stir casting process”, Materials Science and Engineering: A 460 – 461, pp. 357 – 364, 2007. DOI: 10.1016/j.msea.2007.01.052
Search in Google Scholar Back to article
[20] Rama Murthy Raju, P.et al. “Evaluation of fatigue life of Al2024/Al2O3 particulate nano composite fabricated using stir casting technique”, Materials Today Proceedings: Part A 4 (2), pp. 3188 – 3196, 2017. DOI: 10.1016/j.matpr.2017.02.204
Search in Google Scholar Back to article
[21] Ozden, S., Ekici, R., Nair, F. “Investigation of impact behavior of aluminium based SiC particle reinforced metal–matrix composites”, Composites: Part A 38, pp. 484 – 494, 2007. DOI: 10.1016/j.compositesa.2006.02.026
Search in Google Scholar Back to article
[22] Devarakonda, S. K., Koka, N. S. S. “Estimation of high cycle fatigue life of AZ91E-Ni coated Al2O3 particulate nano composites using reliability based approach”, Journal of The Institution of Engineers (India): Series D 99, pp: 201 – 208, 2018. DOI: 10.1007/s40033-018-0164-5
Search in Google Scholar Back to article

Performance Evaluation of Surface Modified Nano Al2o3 (P) Reinforced AZ91E Composites Under Impact and Fatigue Loading Conditions

Abstract

Paradigm

My account