References
- [1] Wielage, B., Pokhmurska, H., Student, M., Gvozdeckii, V., Stupnyckyj, T., Pokhmurskii, V. “Iron-based coatings arc-sprayed with cored wires for applications at elevated temperatures”, Surface and Coatings Technology 220, pp. 27 – 35, 2013. DOI: 10.1016/j.surfcoat.2012.12.013
- [2] Pokhmurskii, V., Student, M., Gvozdeckii, V., Stypnutskyy, T., Student, O., Wielage, B. “Arc-sprayed iron-based coatings for erosion-corrosion protection of boiler tubes at elevated temperatures”, Journal of Thermal Spray Technology 22, pp. 808 – 819, 2013. DOI: 10.1007/s11666-013-9921-z
- [3] Student, M. M., Pokhmurs’ka, H. V., Hvozdets’kyi, V. M., Holovchuk, M. Ya., Romaniv, M. S. “Effect of high-temperature corrosion on the gas-abrasive resistance of electric-arc coatings”, Materials Science 45(4), pp. 481 – 489, 2009. DOI: 10.1007/s11003-010-9205-4
- [4] Dallaire, S., Levert, H. “Development of cored wires for improving the abrasion wear resistance of austenitic stainless steel”, Journal of Thermal Spray Technology 6 (4), pp. 456 – 461, 1997. DOI: 10.1007/s11666-997-0031-7
- [5] Liu, S.-G., Wu, J.-M., Zhang, S.-C., Rong, S.-J., Li, Z.-Z. “High temperature erosion properties of arc-sprayed coatings using various cored wires containing Ti-Al intermetallics”, Wear 262 (5 – 6), pp. 55 – 61, 2007. DOI: 10.1016/j.wear.2006.06.021
- [6] Ivanov, Y. F., Kormyshev, V. E., Gromov, V. E., Konovalov, S. V., Teresov A. D., Semin, A. P “Structural phase states and properties of the layer surfaced on low-carbon steel with Fe‒C‒Cr‒Nb‒W powder-core wire followed by electron-beam processing”, J. Synch. Investig. 11, pp. 933 – 939, 2017. DOI: 10.1134/S1027451017050044
- [7] Student, M., Vojtovych, A., Pokhmurska, H., Maruschak, O., Student, O., Maruschak, P. “Mechanical characteristics and wear resistance of the cladding layers obtained by melting of cored wires with simultaneous vibration of substrate”, Strojnícky časopis – Journal of Mechanical Engineering 69 (1), pp. 109 – 122, 2019. DOI: 10.2478/scjme-2019-0009
- [8] Arizmendi-Morquecho, A., Campa-Castilla, A., Almicar, J., Martinez, A., Gutiérrez, G. V., Judith, K., Bello, M., López, L. L. “Microstructural characterization and wear properties of Fe-based amorphous-crystalline coating deposited by twin wire arc spraying”, Advances in Materials Science and Engineering, 2014. Article ID 836739, DOI: 10.1155/2014/836739
- [9] Student, M., Dzioba, Yu., Hvozdets’kyi, V., Pokhmurska, H., Wielage, B., Grund, T. “High-temperature corrosion of electric-arc coatings sprayed from powder core wires based on the Fe–Cr–B–Al system”, Materials Science 44 (5), pp. 693 – 699, 2008. DOI: 10.1007/s11003-009-9131-5
- [10] Stupnyts’kyi, T. R., Student, M. M., Pokhmurs’ka, H. V., Hvozdets’kyi, V. M. “Optimization of the chromium content of powder wires of the Fe–Cr–C and Fe–Cr–B systems according to the corrosion resistance of electric-arc coatings”, Materials Science 52 (2), pp. 165172, 2016. DOI: 10.1007/s11003-016-9939-8
- [11] Sunde, A. Properties of thermal sprayed coatings for internal use in pipes and bends, Master thesis, Supervisor: Roy Johnsen Trondhein: Norwegian University of Science and Technology Technology, 101 p., 2015.
- [12] Korobov, Yu., Filiрpov, M., Makarov, A., Malygina, I., Soboleva, N., Fantozzi, D., Andrea, M., Koivuluoto, H., Vuoristo, P. “Arc-sprayed fe-based coatings from cored wires for wear and corrosion protection in power engineering”, Coatings 8 (2), 71, 2018. DOI: 10.3390/coatings8020071
- [13] Jablonská, J., Kozubková, M., Zavadilová, B., Zavadil, L., Fialová, S. “The investigation of the cavitation phenomenon in the laval nozzle with full and partial surface wetting” Strojnícky časopis – Journal of Mechanical Engineering 67 (1), pp. 55 – 68, 2017. DOI: 10.1515/scjme-2017-0006
- [14] Pokhmurs’ka, H., Student, M., Hvozdetskyi, V., Stupnytskyi, T., Posuvailo, V. “The influence of size and speed of drops on the structure and properties of electric-ARC sprayed coatings”, Proceedings of the International Thermal Spray Conference and Exposition, ITSC 2017, Dusseldorf, Germany, 7-9 June 2017, N.Y.: Curran Associates, Inc., Vol. 2, pp. 1031 – 1034, 2017.
- [15] Gurvich, L. V., Veyts, I. V., Medvedev, V. A., Khachkuruzov, G. A., Yungman, V. S., Bergman, G. A., Baybuz, V. F., Iorish, V. S., Yurkov, G. N., Gorbov, S. I., et al. Thermodynamic Properties of Individual Substances; Hemisphere Publishing Corp.: New York, NY, USA, 1989, Vol. 1, Part 2, 340 p., 1989.
- [16] Konovalov, S. V., Kormyshev, V. E., Gromov, V. E., Ivanov, Yu. F., Kapralov, E. V., and Semin, A. P. “Formation features of structure-phase states of Cr–Nb–C–V containing coatings on martensitic steel”, J. Synch. Investig. 10 (5), pp. 1119 – 1124, 2016. DOI: 10.1134/S1027451016050098
- [17] Brezinová, J., Viňáš, J., Maruschak, P. O., Guzanová, A., Draganovská, D., Vrabeľ, M. “Sustainable renovation within metallurgical production”, RAM-Verlag, Lüdenscheid, Germany, 215 p., 2017.
- [18] Guzanová, A., Brezinová, J., Bronček, J., Maruschak, P., Landová, M. “Study of selected properties of coatings devoted to extreme tribo-corrosive conditions”, Materials Science Forum 818, pp. 32 – 36, 2015. DOI: 10.4028/www.scientific.net/MSF.818.32
- [19] Buketov, A. V., Brailo, M. V., Yakushchenko, S. V., Sapronov, O. O., Smetankin, S. O. “The formulation of epoxy-polyester matrix with improved physical and mechanical properties for restoration of means of sea and river transport “, Journal of Marine Engineering & Technology, 2018. DOI: 10.1080/20464177.2018.1530171
- [20] Kindrachuk, M. V., Dushek, Y. Y., Luchka, M. V., Gladchenko, A. N. “Evolution of the structure and properties of eutectic coatings during friction”, Powder Metallurgy and Metal Ceramics 34 (5 – 6), pp. 321 – 326, 1995. DOI: 10.1007/BF00560139