Soil Load on Plastic Pipe and its Influence on Lifetime

Jan Poduška; Pavel Hutař; Andreas Frank; Jaroslav Kučera; Jiří Sadílek; Gerald Pinter; Luboš Náhlík

doi:10.2478/scjme-2019-0036

.blurhash-client-img { display: none !important; }

Soil Load on Plastic Pipe and its Influence on Lifetime

Strojnícky časopis - Journal of Mechanical Engineering

Volume 69 (2019): Issue 3 (November 2019)

By: Jan Poduška, Pavel Hutař, Andreas Frank, Jaroslav Kučera, Jiří Sadílek, Gerald Pinter and Luboš Náhlík

Open Access

|Nov 2019

Abstract

Lifetime of plastic pipes can be estimated by integration of a power law describing the crack kinetics. However, this procedure requires an FEM (finite element method) calculation of the possible crack propagation in the pipe to obtain stress intensity factor dependency on the crack length. It is very important for the simulation to consider every possible load that is acting on the pipe. This contribution deals with FEM modelling of a pipe that is loaded by internal pressure, residual stresses and soil loads. Comparison of the factors and pipe lifetime estimation is carried out.

References

[1] Krishnaswamy, R. K. “Analysis of ductile and brittle failures from creep rupture testing of high-density polyethylene (HDPE) pipes”, Polymer 46 (25), pp. 11664 – 11672, 2005. DOI: https://doi.org/10.1016/j.polymer.2005.09.084
Search in Google Scholar Back to article
[2] Brömstrup, H. “PE 100 pipe systems”, 3rd ed., Vulkan-Verlag, Essen, Germany, 2009. ISBN 978-3-8027-2759-7
Search in Google Scholar Back to article
[3] Pinter, G., Haager, M., Balika, W., Lang, R. W. “Fatigue crack growth in PE-HD pipe grades”, Plastics, Rubber and Composites 34 (1), pp. 25 – 33, 2005. DOI: https://doi.org/10.1179/174328905X29758
Search in Google Scholar Back to article
[4] Nezbedová, E., Hutař, P., Zouhar, M., Knésl, Z., Sadílek, J., Náhlík, L. “The applicability of the Pennsylvania Notch Test for a new generation of PE pipe grades”, Polymer Testing 32 (1), pp. 106 – 114, 2013. DOI: https://doi.org/10.1016/j.polymertesting.2012.09.009
Search in Google Scholar Back to article
[5] Hutař, P., Ševčík, M., Náhlík, L., Pinter, G., Frank, A., Mitev, I. “A numerical methodology for lifetime estimation of HDPE pressure pipes”, Engineering Fracture Mechanics 78 (17), pp. 3049 – 3058, 2011. DOI: https://doi.org/10.1016/j.engfracmech.2011.09.001
Search in Google Scholar Back to article
[6] Frank, A., Hutař, P., Pinter, G. “Numerical assessment of PE 80 and PE 100 pipe lifetime based on Paris-Erdogan equation” Macromolecular Symposia 311 (1), pp. 112 – 121. DOI: https://doi.org/10.1002/masy.201000096
Search in Google Scholar Back to article
[7] Janson, L-E. “Plastics pipes for water supply and sewage disposal”, 3^rd ed. Borealis, Stockholm, Sweden, 1999.
Search in Google Scholar Back to article
[8] Williams, J. G., Hodgkinson, J. M., Gray, A. “The determination of residual stresses in plastic pipe and their role in fracture”, Polymer Engineering & Science 21 (13), pp. 822 – 828, 1981. DOI: https://doi.org/10.1002/pen.760211304
Search in Google Scholar Back to article
[9] Choi, S., Broutman, L. J. “Residual stresses in plastic pipes and fittings III. - Effect on stable crack growth behaviour”. Polymer (Korea) 21, pp. 83 – 92, 1997.
Search in Google Scholar Back to article
[10] Poduška, J., Hutař, P., Kučera, J., Frank, A., Sadílek, J., Pinter, G., et al. “Residual stress in polyethylene pipes”, Polymer Testing 54 (September 2016), pp. 288 – 295, 2016. DOI: https://doi.org/10.1016/j.polymertesting.2016.07.017
Search in Google Scholar Back to article
[11] Poduška, J., Kučera, J., Hutař, P., Ševčík, M., Křivánek, J., Sadílek, J., et al. “Residual stress distribution in extruded polypropylene pipes”, Polymer Testing 40 (December 2014), pp. 88 – 98, 2014. DOI: https://doi.org/10.1016/j.polymertesting.2014.08.006
Search in Google Scholar Back to article
[12] Valkovič V, Jančo R, Frydrýšek K. “The effect of landslide on gas pipeline”, Strojnicky časopis – Journal of Mechanical Engineering 66 (2), pp. 95 – 100, 2016. DOI: https://doi.org/10.1515/scjme-2016-0023
Search in Google Scholar Back to article
[13] ÖNORM B 5012: Statische Berechnung erdverlegter Rohrleitungen für die Wasserversorgung und die Abwasser-Entsorgung 2008.
Search in Google Scholar Back to article
[14] Ševčík, M., Arbeiter, F., Hutař, P., Pinter, G., Náhlík, L. “The Effect of Soil Load on Fracture Behaviour of Three-Layer Polymer Pipe for Non-Pressurised Applications”, Key Engineering Materials 627, pp. 197 – 200, 2015. DOI: https://doi.org/10.4028/www.scientific.net/KEM.627.197
Search in Google Scholar Back to article
[15] Frank, A., Arbeiter, F., Berger, I., Hutař, P., Náhlík, L., Pinter, G. “Fracture Mechanics Lifetime Prediction of Polyethylene Pipes”, Journal of Pipeline Systems Engineering and Practice 10 (1), pp. 1 – 14, 2019. DOI: https://doi.org/10.1061/(ASCE)PS.1949-1204.0000356
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/scjme-2019-0036 | Journal eISSN: 2450-5471 | Journal ISSN: 0039-2472

Journal RSS Feed

Language: English

Page range: 101 - 106

Published on: Nov 15, 2019

Published by: Slovak University of Technology in Bratislava

In partnership with: Paradigm Publishing Services

Publication frequency: 2 issues per year

Keywords:

Related subjects:

Mechanical engineering,

Fundamentals of mechanical engineering,

Mechanics

© 2019 Jan Poduška, Pavel Hutař, Andreas Frank, Jaroslav Kučera, Jiří Sadílek, Gerald Pinter, Luboš Náhlík, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 69 (2019): Issue 3 (November 2019)