References
- [1] ASTM F2792-12a Standard Terminology for Additive Manufacturing Technologies, (Withdrawn 2015), ASTM International, West Conshohocken, PA, 2012. Available at: www.astm.org
- [2] Goh, G. D., Dikshit, V., Nagalingam, A. P., Goh, G. L., Agarwala, S., Sing, S. L., Wei, J., Yeong, W. Y. “Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplastics”, Materials & Design 137, pp. 79 – 89, 2018. DOI: https://doi.org/10.1016/j.matdes.2017.10.021
- [3] Deckard, C. R. “Method and apparatus for producing parts by selective sintering”, United States, US4863538A, 1986.
- [4] Parandoush, P., Lin, D. “A review on additive manufacturing of polymer fiber composites”, Composite Structures 182, pp. 36 – 53, 2017. DOI: https://doi.org/10.1016/j.compstruct.2017.08.088 [DOI]
- [5] Varotsis, A. B. “Introduction to FDM 3D printing”, [online]. Available at: www.3dhubs.com/knowledge-base/introduction-fdm-3d-printing [Accessed: 12 03 2019].
- [6] Dodok, T., Čuboňová, N., Kuric, I. “Workshop programming as a part of technological preparation of production”, Advanced in Science and Technology Research Journal 11 (1), pp. 111 – 116, 2017. DOI: https://doi.org/10.12913/22998624/66504
- [7] Dimić, A., Mišković, Ž., Mitrović, R., Ristivojvić, M., et al. „The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology”, Journal of Mechanical Engineering – Strojnícky časopis, 68(3), pp 261-270, 2018
- [8] Dizon, J. R. C., Espera A. H. Jr., A. H., Chen, Q., Advincula, R. C. “Mechanical characterization of 3D-printed polymers”, Additive Manufacturing 20, pp. 44 – 67, 2018. DOI: https://doi.org/10.1016/j.addma.2017.12.002
- [9] Boschetto, A., Bottini, L. “Accuracy prediction in fused deposition modelling”, The International Journal of Advanced Manufacturing Technology 73 (5-8), pp. 913 – 928, 2014. DOI: https://doi.org/10.1007/s00170-014-5886-4
- [10] Hyer, M. W. “Stress analysis of fiber-reinforced composite materials”, 1st edition, The McGraw-Hill Companies, Singapore, 1998. ISBN 0-07-115983-5.
- [11] Ranakoti, L., Pokhriyal, M., Kumar, A. “Natural Fibers And Biopolymers Characterization: A Future Potential Composite Material”, Strojnícky časopis – Journal of Mechanical Engineering 68 (1), pp. 33 – 50, 2018. DOI: 10.2478/scjme-2018-0004
- [12] Zapoměl, J., Dekýš, V., Ferfecki, P., Sapietová, A., Sága, M., Žmindák, M. “Identification of material damping of a carbon composite bar and study of its effect on attenuation of its transient lateral vibrations”, International Journal of Applied Mechanics 7 (6), 2015.
- [13] Crease, A. “3D printer types & technologies”, [online]. Available at: https://markforged.com/learn/3d-printer-types-technologies [Accessed: 14 03 2019].
- [14] Tekinalp, H. L., Kunc, V., Velez-Garcia, G. M., Duty, Ch. E., et al. “Highly oriented carbon fiber–polymer composites via additive manufacturing”, Composites Science and Technology 105, pp. 144 – 150, 2014. DOI: https://doi.org/10.1016/j.compscitech.2014.10.009
- [15] Wang, Y. “Mechanical Properties of Stitched Multiaxial Fabric Reinforced Composites From Manual Layup Process”, Applied Composite Materials 9(2), pp 81 – 97, 2002.
- [16] ASTM D3039/D3039M-17, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA, 2017. Available at: www.astm.org
- [17] ASTM D638-14, Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, PA, 2014. Available at: www.astm.org
- [18] dos Santos, J. A. P., “Additive manufacturing of thermoplastic matrix composites”, Masters Dissertations, Universidade do Porto, 2017. [online] Available at: https://repositorio-aberto.up.pt/bitstream/10216/107982/2/221588.pdf [Accessed: 15.3.2019]