References
- [1] available on the internet “bogie”
- [2] Búry, M. “Residual Stress in Elastic Side Friction Block”, TUKE, p. 68, 2018.
- [3] Fürbacher, I. “Lexicon of technical materials”, Praha: Dashöfer, 1998 – 2006. ISBN 80-86229-02-5.
- [4] Schajer, G. S. “Practical residual stress measurement methods”, John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ, United Kingdom, 2013. ISBN 978-1-118-34237-4.
- [5] Trebuňa, F., Šimčák, F. “Quantification of residual stresses by tensometry” (in Slovak), TUKE, p. 134, 2005.
- [6] Beghini, M., Bertini, L., Giri, A., Santus, C., Valentini, E. “Measuring residual stress in finite thickness plates using the hole-drilling method”, Journal of Strain Analysis for Engineering Design 54 (1), pp. 65 – 75, 2019. DOI: 10.1177/0309324718821832
- [7] Barsanti, M., Beghini, M., Bertini, L., Monelli, B. D., Santus, C. “First-order correction to counter the effect of eccentricity on the hole-drilling integral method with strain-gage rosettes”, Journal of Strain Analysis for Engineering Design 51 (6), pp. 431 – 443, 2016. DOI: 10.1177/0309324716649529
- [8] ASTM E837-13a, “Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method”, American Society for Testing and Materials, 2013.
- [9] Valentini, E., Bertelli, L., Benincasa, A. “Improvements in the hole-drilling test method for determining residual stresses in polymeric materials”, Materials Performance and Characterization 7 (4), article No. 123, 2018. DOI: 10.1520/MPC20170123
- [10] www.sintechnology.com
- [11] Trebuňa, F., Šimčák, F., Bocko, J., Pástor, M. “Analysis of the Causes of Casting Pedestal Failures and the Measures for Increasing Their Residual Lifetime”, Engineering Failure Analysis 29, pp. 27 – 37, 2013.
- [12] Trebuňa, F., Šimčák, F., Pástor, M., Šarga, P. “Residual stress analysis in containers for transport of radioactive materials”, Applied Mechanics and Materials 732, pp. 28 – 31, 2015. DOI: 10.4028/www.scientific.net/AMM.732.28
- [13] Hagara, M., Trebuňa, F., Pástor, M., Huňady, R., Lengvarský, P. “Analysis of the aspects of residual stresses quantification performed by 3D DIC combined with standardized hole-drilling method”, Measurement 137, pp. 238 – 256, 2019. DOI: 10.1016/j.measurement.2019.01.028
- [14] Hagara, M., Huňady, R., Trebuňa, F. “Stress Analysis Performed in the Near Surrounding of a Small Hole by a Digital Image Correlation Method”, Acta Mechanica Slovaca 18 (3 – 4), pp. 74 – 81, 2014.
- [15] Pástor, M., Trebuňa, F. “Application of Transmission Photoelasticimetry for Stress Concentration Analyses in Construction Supporting Parts”, Applied Mechanics and Materials 611, pp. 443 – 449, 2014. DOI: 10.4028/www.scientific.net/AMM.611.443
- [16] Lord, J. D., Penn, D., Whitehead, P. “The application of digital image correlation for measuring residual stress by incremental hole drilling”, Applied Mechanics and Materials 13 – 14, pp. 65 – 73, 2008. DOI: 10.4028/www.scientific.net/AMM.13-14.65
- [17] Lothhammer, L. R., Viotti M. R., Albertazzi Jr., A., Veiga C. L. N. “Residual stress measurements in steel pipes using DSPI and the hole-drilling technique”, International Journal of pressure vessels and Piping 152, pp. 46 – 55, 2017. DOI: 10.1016/j.ijpvp.2017.05.008
- [18] Paška, Z., Fojtík, F., Ferfecki, P. “Full field evaluation of the stress tensor components in 2D photoelasticity via computer software”. Journal of Mechanical Engineering – Strojnícky časopis 66 (2), pp. 63 – 66, 2016. DOI: 10.1515/scjme-2016-0019
- [19] Trebuňa, F., Pástor, M., Huňady, R., Frankovský, P., Hagara, M. “Optical Method in Mechanics” (in Slovak), TUKE, 2017.
- [20] Frankovský, P., Ostertag, O., Delyová, I. “Distorsion of isochromatic fringes in the process of stress measurement in structural part by photoelasticimetry”, Journal of Mechanical Engineering – Strojnícky časopis 68 (2), pp. 53 – 60, 2018. DOI: 10.2478/scjme-2018-0017