Effect of Minimum Quantity Lubrication on Surface Roughness and Temperature in Milling of EN31 Steel for Die Making

Keerthana, Bhosetty; Vijaya Kumar, Gurram; Anand Babu, Kumba

doi:10.2478/scjme-2019-0005

Abstract

Minimum Quantity Lubrication has enormous influence on the process parameters in machining. The main aim of the present work is to study the effects of spindle speed, depth of cut, tool material, amount of coolant dispensed and type of coolant on surface roughness and tool temperature in EN31 steel die making including Minimum Quantity Lubrication (MQL) by introducing a self-designed MQL setup and to optimize the responses using fuzzy-logic and Particle Swarm Optimization technique.

References

[1] Tunc, L. T., Gu, Y., Burke, M. G. “Effects Of Minimal Quantity Lubrication (MQL) On Surface Integrity In Robotic Milling Of Austenitic Stainless Steel”, Procedia CIRP 45, pp. 215 – 218, 2016. DOI: 10.1016/j.procir.2016.02.337
Search in Google Scholar Back to article
[2] Kedare S. B, Borse D.R, and Shahane P. T. “Effect of Minimum Quantity Lubrication (MQL) on Surface Roughness of Mild Steel of 15HRC on Universal Milling Machine” Procedia Materials Science 6, pp. 150 – 153, 2014. DOI: 10.1016/j.mspro.2014.07.018
Search in Google Scholar Back to article
[3] Dhar, N. R., Islam, M. W. “A Study of Effects of MQL on Tool Wear, Job Dimension and Finish in Turning AISI-1040 Steel”, AEESEAP Journal of Engineering Education 31 (2), pp. 15 – 22, 2017.
Search in Google Scholar Back to article
[4] Himanshu, P. R., Lalta, P., Mayank, P., Vineet, Ti. “An Estimating The Effect Of Process Parameters On Metal Removal Rate And Surface Roughness In Wedm Of Composite Al6063/Sic/Al2o3 By Taguchi Method“, Journal of Mechanical Engineering – Strojnícky časopis 67 (2), pp. 25 – 36, 2017. DOI: 10.1515/scjme-2017-0015
Search in Google Scholar Back to article
[5] Beri, N., Maheshwari, S., Sharma, C., Kumar, A. “Machining Performance Evaluation During Electric Discharge Machining Of Inconel 718 Using The Taguchi Methodology“, Journal of Mechanical Engineering – Strojnícky časopis 62, (5 – 6), pp. 299 – 310, 2011.
Search in Google Scholar Back to article
[6] Anand Babu, K., Vijaya Kumar, G., Venkataramaiah, P. “Prediction of Surface Roughness in Drilling of Al 7075/10% - SiCp Composite under MQL Condition using Fuzzy Logic”, Indian Journal of Science and Technology 8 (12), pp. 1 – 10, 2015. DOI: 10.17485/ijst/2015/v8i12/54074
Search in Google Scholar Back to article
[7] Shahriar, J. H., Md, Nafis, A. “A neuro-fuzzy approach to select cutting parameters for commercial die manufacturing”, Procedia Engineering 90, 753 – 759, 2014. DOI: https://doi.org/10.1016/j.proeng.2014.11.809
Search in Google Scholar Back to article
[8] Andris, L., Toms, T. ”The Influence of High-Speed Milling Strategies on 3D Surface Roughness Parameters”, Procedia Engineering 100, pp. 1253 – 1261, 2015. DOI: 10.1016/j.proeng.2015.01.491
Search in Google Scholar Back to article
[9] Jurkovic, J., Korosec, M., Kopac, J. “New approach in tool wear measuring technique using CCD vision system“, International Journal of Machine Tools and Manufacture 45 (9), pp. 1023 – 1030, 2005.
Search in Google Scholar Back to article
[10] Rajesh, Ch., Kumar, H., Garg, R. K. “Analysis and Evaluation of Heat Affected Zones in Electric Discharge Machining of EN 31 Die Steel”, Indian Journal of Engineering & Material Sciences 17, 91 – 98, 2010.
Search in Google Scholar Back to article
[11] Dave, H. K., Patel, L. S, Raval, H. K. “Effect of machining conditions on MRR and surface roughness during CNC Turning of different Materials Using TiN Coated Cutting Tools – A Taguchi approach”, International Journal of Industrial Engineering Computations 3, pp. 925 – 930. 2012.
Search in Google Scholar Back to article
[12] Arunkumar, N., Shareef Abdur Rawoof, H., Vivek, R. “Investigation on the Effect Of Process Parameters For Machining Of EN31 (Air Hardened Steel) By EDM”, International Journal of Engineering Research and Applications 2 (4), pp. 1111 – 1121, 2012.
Search in Google Scholar Back to article
[13] Srinivasa Rao, M., Ramanaiah, N. “Optimization Of Process Parameters For Fsw Of Al-Mg-Mn-Sc-Zr Alloy Using Ccd And RSM“, Journal of Mechanical Engineering – Strojnícky časopis 68 (3), pp. 195 – 224, 2018. DOI: 10.2478/scjme-2018-0035
Search in Google Scholar Back to article
[14] Gopalakannan, S., Senthilvelan, T., Kalaichelvan, K. “Modelling And Optimization Of Edm Process Parameters On Machining Of Al 7075/Sic Metal Matrix Composite By Applying Response Surface Method“, Journal of Mechanical Engineering – Strojnícky časopis 63 (1), pp. 37 – 54, 2012.
Search in Google Scholar Back to article
[15] Ramanujam, R., Raju, R. “Process Parameter Optimization In Turning Of Al-Sicp Composites Using Taguchi Based Desirability Function Analysis“, Journal of Mechanical Engineering – Strojnícky časopis 62 (2), 81 – 92, 2011.
Search in Google Scholar Back to article
[16] Rajeswari, K., Lakshmi, P. “A Pso-Tuning of Fuzzy Logic Controller For Vehicle Suspension System“, Journal of Mechanical Engineering – Strojnícky Časopis 61 (4), pp. 215 – 232, 2010.
Search in Google Scholar Back to article
[17] Tsai, C. Y., Yeh, S. W. “A multiple objective particle swarm optimization approach for inventory classification”, International Journal of Production Economics 114 (2), pp. 656 – 666, 2008.
Search in Google Scholar Back to article
[18] Sreenivasa Rao, M., Venkaiah, N. “Parametric Optimization In Machining Of Nimonic-263 Alloy Using RSM And Particle Swarm Optimization”, Procedia Materials Science 10, pp.70 – 79, 2015. DOI: https://doi.org/10.1016/j.mspro.2015.06.027
Search in Google Scholar Back to article
[19] Cus, F., Zuperl, U., Gecevska, V. “High speed end-milling optimization using Particle Swarm Intelligence”, Journal of Achievements in Materials and Manufacturing Engineering 22 (2), pp. 75 – 78, 2007.
Search in Google Scholar Back to article
[20] Rajyalakshmi, G., Koushik, T., Kalyan, T. “Parametric Optimization In Wedm Using Particle Swarm Optimization Technique”, 56th IRF International Conference, Pune, India, 2016. ISBN: 978-93-86083-26-5.
Search in Google Scholar Back to article
[21] Kennedy, J., Eberhart, R. “Particle Swarm Optimisation”, Proceedings of ICNN’95 - International Conference on Neural Networks, pp. 1942 – 1948, 1995. DOI:10.1109/ICNN.1995.488968
Search in Google Scholar Back to article

Effect of Minimum Quantity Lubrication on Surface Roughness and Temperature in Milling of EN31 Steel for Die Making

Abstract

Paradigm

My account