Have a personal or library account? Click to login
The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology Cover

The Influence of Material on the Operational Characteristics of Spur Gears Manufactured by the 3D Printing Technology

Strojnícky časopis - Journal of Mechanical Engineering
Volume 68 (2018): Issue 3 (November 2018)
By: Aleksandar Dimić,  Žarko Mišković,  Radivoje Mitrović,  Mileta Ristivojević,  Zoran Stamenić,  Ján Danko,  Jozef Bucha and  Tomáš Milesich  
Open Access
|Dec 2018

References

  1. [1] D. Jelaska. Gears and gear drives, John Wiley & Sons Ltd, 2012, ISBN 978-1-119-94130-9.
    Search in Google ScholarBack to article
  2. [2] K. Michaelis, H. Winter. Development of a high temperature FZG-ryder gear lubricant load capacity machine (Wright Research and Development Center, 1989). Identification number F49620-86-C-0081.
    Search in Google ScholarBack to article
  3. [3] ISO 14635-1:2000 Gears -- FZG test procedures -- Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils.
    Search in Google ScholarBack to article
  4. [4] ISO 14635-2:2004 Gears -- FZG test procedures -- Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils.
    Search in Google ScholarBack to article
  5. [5] ISO 14635-3:2005 Gears -- FZG test procedures -- Part 3: FZG test method A/2, 8/50 for relative scuffing load-carrying capacity and wear characteristics of semifluid gear greases.
    Search in Google ScholarBack to article
  6. [6] B.R. Höhn, G. Steinberger. Test methods for Lubricant Related Influences on the Gear Load Capacity (Lubricants Russia 2006, 2nd international conference).
    Search in Google ScholarBack to article
  7. [7] T. Kellner. GE Reports website (2016), Fit to print: New Plant Will Assemble World’s First Passenger Jet Engine with 3D printed Fuel Nozzles, Next-Gen Materials, http://www.gereports.com/ (accessed on 1 June 2016).
    Search in Google ScholarBack to article
  8. [8] H. Krueger. Standardization for Additive Manufacturing in Aerospace. Engineering 2017 (3), No. 5: 585. DOI: 10.1016/J.ENG.2017.05.010
    Search in Google ScholarBack to article
  9. [9] R. Mitrović, Ž. Mišković, M. Ristivojević, A. Dimić, J. Danko, J. Bucha, M. Rackov. Determination of optimal parameters for rapid prototyping of the involute gears. IOP Conference Series: Materials Science and Engineering 2018 (393). DOI: 10.1088/1757-899X/393/1/012105
    Search in Google ScholarBack to article
  10. [10] 3Dhubs. PLA vs. ABS: What's the difference? https://www.3dhubs.com/ (accessed on March 2018.)
    Search in Google ScholarBack to article
  11. [11] MakerBot. Replicator 2X-Experimental 3D printer. User Manual. https:// http://downloads.makerbot.com (accessed on March 2018.)
    Search in Google ScholarBack to article
  12. [12] R. Mitrović, Ž. Mišković, M. Ristivojević, A. Dimić, J. Danko, J. Bucha, M. Rackov. Statistical correlation between the printing angle and stress and strain of 3D printed models under static axial loading. ECF22 - Loading and Environmental effects on Structural Integrity, 2018.
    Search in Google ScholarBack to article
  13. [13] T. Letcher, B. Rankouhi, S. Javadpour. Experimental study of mechanical properties of additively manufactured abs plastic as a function of layer parameters. Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition, Houston, Texas, Nov.13- 19, 2015, 1-8.
    Search in Google ScholarBack to article
  14. [14] A. R. T. Perez, D. A. Roberson, R. B. Wicker. Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials. J Fail. Anal. and Preven. 2014 (14), 343 - 353.
    Search in Google ScholarBack to article
  15. [15] M. Åkerblom. Gear noise and vibration - a literature survey (Volvo Construction Equipment Components AB SE-631 85 Eskilstuna, Sweden).
    Search in Google ScholarBack to article
  16. [16] K. Terashima, N. Tukamoto, N. Nishida. Development of plastic gears for power transmission - Design on load carying capacity. Bulletin of JSME 1986 (29), No. 250, 1326 - 1329.
    Search in Google ScholarBack to article
  17. [17] C. J. Hooke, K. Mao, D. Walton, A. R. Breeds and S. N. Kukureka. Measurement and Prediction of the Surface Temperature in Polymer Gears and Its Relationship to Gear Wear J. Tribol 1993 (115), No. 1, 119 - 124.
    Search in Google ScholarBack to article
  18. [18] L. Jia-Jun, C. Yu, C. Yin-Qian. The generation of wear debris of different morphology in the running-in process of iron and steels. Wear 1992 (254), 259 - 267.
    Search in Google ScholarBack to article
  19. [19] Ž. Mišković, R. Mitrović, Z. Stamenić. Analysis of grease contamination influence on the internal radial clearance of ball bearings by thermographic inspection. Thermal Science 2016 (20), No. 1, 255 - 265.
    Search in Google ScholarBack to article
  20. [20] A. Glowacz, Z. Glowacz. Diagnosis of the three-phase induction motor using thermal imaging Infrared Physics & Technology 2017 (81), 7 - 16.
    Search in Google ScholarBack to article
  21. [21] M. Fidali. An idea of continuous thermographic monitoring of machinery (9th International Conference on Quantitative InfraRed Thermography, 2008).
    Search in Google ScholarBack to article
  22. [22] Extech IRC57 InfraCam SD Thermal Imaging Camera, http://www.instrumentation2000.com/.
    Search in Google ScholarBack to article
  23. [23] Thermowork Inc. Emissivity Table (https://www.thermoworks.com/emissivity_table).
    Search in Google ScholarBack to article
  24. [24] SKF USA Inc. Condition Monitoring Center. The SKF Microlog series catalogue. SKF Group, Livingston, 2018.
    Search in Google ScholarBack to article
  25. [25] SKF USA Inc. Condition Monitoring Center. SKF Microlog Analyzer Accessories Catalog. SKF Group, San Diego, 2018.
    Search in Google ScholarBack to article
  26. [26] R. Jančo, L. Écsi, P. Élesztős. FSW Numerical Simulation of Aluminium Plates by SYSWELD- Part II. Strojnícky časopis - Journal of Mechanical Engineering 2016 (66), No. 2, 29 - 36. DOI: 10.1515/scjme-2016-0016
    Search in Google ScholarBack to article
  27. [27] P. Élesztős, R. Jančo, V. Voštiar. Optimization of Welding Process using a Genetic Algorithm. Strojnícky časopis - Journal of Mechanical Engineering 2018 (68), No. 2, 17 - 24. DOI: 10.2478/scjme-2018-0014.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/scjme-2018-0039 | Journal eISSN: 2450-5471 | Journal ISSN: 0039-2472
Journal RSS Feed
Language: English
Page range: 261 - 270
Published on: Dec 6, 2018
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
3D printing technology,
plastic spur gears,
back to back gear test
Related subjects:
Engineering,
Mechanical engineering,
Fundamentals of mechanical engineering,
Mechanics

© 2018 Aleksandar Dimić, Žarko Mišković, Radivoje Mitrović, Mileta Ristivojević, Zoran Stamenić, Ján Danko, Jozef Bucha, Tomáš Milesich, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 68 (2018): Issue 3 (November 2018)Next article