References
- [1] F. Trebuňa, F. Šimčák. Stability of the Mechanical System Elements (in Slovak), Košice, 2004
- [2] F. Trebuňa, F. Šimčák, J. Bocko, M. Pástor. Analysis of the Causes of Casting Pedestal Failures and the Measures for Increasing Their Residual Lifetime. Engineering Failure Analysis 2013 (29), 27 – 37.
- [3] F. Trebuňa, et al. Final Report on the Examination of the Anchor Threaded Joints of the ZPO 2 Casting Pedestal (in Slovak). Košice 2014.
- [4] Y. Nashwan. Experimental Strain Investigation of Bolt Torque Effect in Mechanically Fastened Joints. Engineering 2012 (4), 359 – 367.
- [5] M. Fernández. Metrological Study for the Optimal Selection of the Photoelastic Model in Transmission Photoelasticity. Applied Optics 2011 (50), No. 29, 5721 – 5727.
- [6] M. Pástor, F. Trebuňa. Application of Transmission Photoelasticimetry for Stress Concentration Analyses in Construction Supporting Parts. Applied Mechanics and Materials 2014 (611), 443 – 449.
- [7] A. Mudassar, S. Butt. Improved Digital Image Correlation for In-plane Displacement Measurement. Applied Optics 2014 (53), No. 5, 960 – 970.
- [8] C. Quan, J. Tay, W. Sun, X. He. Determination of Three-dimensional Displacement Using Two-dimensional Digital Image Correlation. Applied Optics 2008 (47), No. 4, 583 – 593.
- [9] T. Fricke-Begemann. Three-dimensional Deformation Field Measurement with Digital Speckle Correlation. Applied Optics 2003 (42), No. 34, 6783 – 6796.
- [10] T. Siebert, T. Becker, K. Splitthof. Analysis of Advanced Materials under Load. SPIE – The International Society for Optical Engineering, 2006.
- [11] M. Hagara, M. Schrötter, P. Lengvarský. Influence of the Different Random Pattern Creation Forms on the Results of Experimental Modal Analysis Performed by High-speed Digital Image Correlation. Acta Mechanica et Automatica 2014 (8), No. 1, 22 – 26.
- [12] M. Schrötter, M. Hagara, M. Kalina. The Analysis of Different Stochastic Patterns during Loading in Plastic Area Using the DIC Method. Applied Mechanics and Materials 2014 (611), 490 – 495.
- [13] B. Pan, H. Xie, Z. Wang, K. Qian, and Z. Wang. Study on Subset Size Selection in Digital Image Correlation for Speckle Patterns. Optics Express 2008 (16), No. 10, 7037 – 7048.
- [14] M. Hagara, R. Huňady. Q-STRESS v.1.0 – a Tool for Determination of Stress Fields Using Digital Image Correlation Systems. Procedia Engineering 2014 (96), 136 – 142.
- [15] T. Becker, K. Splitthof, T. Siebert, P. Kletting. Error Estimations of 3D Digital Image Correlation Measurements. Technical note, Dantec Dynamics, 2008.
- [16] T. Siebert, T. Becker, K. Spiltthof, I. Neumann, R. Krupka. Error Estimations in Digital Image Correlation Technique. Applied Mechanics and Materials 2007 (7-8), 265 – 270.
- [17] H. W. Schreier, M. A. Sutton. Systematic Errors in Digital Image Correlation Due to Undermatched Subset Shape Functions. Experimental Mechanics 2002 (42), 303 – 310.
- [18] A. Choudhury, C.M. Samar and S. Susenjit. Effect of Lamination Angle and Thickness on Analysis of Composite Plate Under Thermo Mechanical Loading. Journal of Mechanical Engineering – Strojnícky časopis 2017 (67), No. 1, 5 – 22.
- [19] M. Pástor and P. Lengvarský, “Analysis of stress and deformation fields of shape complex beams”, MATEC Web Conf. 157 02037 (2018)
- [20] R. Čech, P. Horyl P. Maršálek. Modelling of Two-Seat Connection to the Frame of Rail Wagon in Terms of Resistance at Impact Test. Journal of Mechanical Engineering – Strojnícky časopis 2016 (66), No. 2, 101 – 106.
- [21] M. Hagara, R. Huňady, F. Trebuňa. Stress Analysis Performed in the Near Surrounding of a Small Hole by a Digital Image Correlation Method. Acta Mechanica Slovaca 2014 (18), No. 3 – 4, 74 – 81.
- [22] P. Frankovský et al. Utilization Possibilities of PhotoStress Method in Determination of Residual Stresses. Applied Mechanics and Materials 2015 (732), 3 – 8.