References
- N. Hivarekar et al., “Preventive and predictive maintenance modeling,” in Proc. RAMS, 2020, pp. 1–6, doi: 10.1109/RAMS48030.2020.9153636.
- H. Meriem, H. Nora, and O. Samir, “Predictive maintenance for smart industrial systems: a roadmap,” Procedia Computer Science, vol. 220, pp. 645–650, 2023, doi: 10.1016/j.procs.2023.03.082.
- P. Mallioris, E. Aivazidou, and D. Bechtsis, “Predictive maintenance in industry 4.0: A systematic multi-sector mapping,” CIRP Journal of Manufacturing Science and Technology, vol. 50, pp. 80–103, 2024, doi: 10.1016/j.cirpj.2024.02.003.
- S. Nikolic and C. Rados, “Motor current signature analysis in predictive maintenance,” Journal of Energy – Energija, vol. 67, no. 4, pp. 3–6, 2018, doi: 10.37798/201867462.
- E. L. Bonaldi, L. L. Oliveira, J. G. da Silva, and G. Lambert-Torres, “Predictive maintenance by electrical signature analysis to induction motors,” 2012, doi: 10.5772/48045.
- D. Miljković, “Brief review of motor current signature analysis,” CrSNDT Journal, vol. 5, 2016.
- G. E. Hinton and R. R. Salakhutdinov, “Reducing the dimensionality of data with neural networks,” Science, vol. 313, pp. 504–507, 2006, doi: 10.1126/science.1127647.
- Y. Bengio, “Learning deep architectures for AI,” Foundations and Trends in Machine Learning, 2009, doi: 10.1561/2200000006.
- Y. Yang, M. M. M. Haque, D. Bai, and W. Tang, “Fault diagnosis of electric motors using deep learning algorithms and its application: A review,” Energies, vol. 14, 2021, doi: 10.3390/en14217017.
- O. V. Thorsen and M. Dalva, “Failure identification and analysis for high voltage induction motors in petrochemical industry,” in Proc. IEEE IAS Annual Meeting, 1998, pp. 291–298, doi: 10.1109/28.777188.
- W. Jung et al., “Vibration and current dataset of three-phase permanent magnet synchronous motors with stator faults,” Data in Brief, vol. 47, 2023, doi: 10.1016/j.dib.2023.108952.
- W. Jung et al., “Vibration, acoustic, temperature, and motor current dataset of rotating machine under varying operating conditions for fault diagnosis,” Data in Brief, vol. 48, 2023, doi: 10.1016/j.dib.2023.109049.
- Z. A. Bukhsh, A. Saeed, I. Stipanovic, and A. G. Doree, “Predictive maintenance using tree-based classification techniques: a case of railway switches,” Transportation Research Part C, vol. 101, pp. 35–54, 2019, doi: 10.1016/j.trc.2019.02.001.
- IEC 61000-2-2:2002, Compatibility levels for low-frequency conducted disturbances and signaling in public low-voltage power supply systems, 2002.
- IEC 60034-25:2014, Rotating electrical machines – Part 25: Effects of unbalanced voltages on the performance of three-phase cage induction motors, 2014.
- J. Renfigo, H. Salazar, A. Bueno, and J. M. Aller, “Experimental evaluation of the voltage unbalance in the efficiency of induction motors,” in Proc. PEPQA, 2017, pp. 1–6.
- S. H. Kia, H. Henao, G.-A. Capolino, and C. Martis, “Induction machine broken bars fault detection using stray flux after supply disconnection,” in Proc. IECON, 2006, pp. 1498–1503, doi: 10.1109/IECON.2006.347595.
- M. Binder, V. Mezhuyev, and M. Tschandl, “Predictive maintenance for railway domain: A systematic literature review,” IEEE Engineering Management Review, vol. 51, no. 2, pp. 120–140, 2023, doi: 10.1109/EMR.2023.3262282.