References
- S. Dam, P. Mandal, ‘A hybrid, fully-integrated, dual-output dc/dc converter for portable electronics’, IEEE transaction on power electronics, Vol. 36, N°.4, pp. 4360-4379, 2021.
- J. Wibben, R. Harjani, ‘A high efficiency dc/dc converter using 2nH integrated inductors’, IEEE journal of solid state circuits, Vol. 43, N°. 4, pp.844-854, 2008.
- M. Melati, R. Rabia, M. R. Benzidane, V. Bley, T. A. Benattia, A. Namoune, ‘Design, Modeling, and Fabrication of an Ultra-Thin Planar Capacitor’, Journal of Electronic Materials, Vol. 53, No. 1, pp. 449-461, 2024.
- M.R. Benzidane, R. Melati, M. Benyamina, S. Meskine, P. Spiteri, A. Boukortt, T. A. Benattia, ‘Miniaturization and optimization of a dc/dc boost converter for photovoltaic application by designing an integrated dual layer inductor model’, Transaction on electrical and electronic materials, N°. 5, pp. 462-475, 2022.
- A. Namoune, R. Taleb, N. Mansour, ‘simulation of an integrated spiral inductor and inter digital capacitor in a buck micro converter’, Automatika, Vol. 64, N°. 2, pp. 268-276, 2022.
- J. Sathya sree, V. Vanukuru, D. R. Nair, A. Chakravorty, ‘A substrate model for on chip tapered spiral inductors with forward and reverse excitations’, IEEE Transactions on electron devices, Vol. 66, N°. 1, pp. 802-805, 2019.
- A. Namoune, R. Taleb, A. Derrouazin, A Belboula, A. Hamid, ‘Integrated square shape inductor with magnetic core in a buck converter dc/dc’, Przeglad elektrotechniczny, Vol. 95, N°. 9, pp. 57-61, 2019.
- B. A. Ganji, S. Kheiry, ‘Design and analysis of a novel MEMS spiral inductor with high quality Factor’, Microsystem Technologies, Vol. 24, pp:3321–3328, 2018
- A. Namoune, M. R. Benzidane, R. Melati, A. Boukortt, T. A. Benattia, Z. Benbouzid, ‘Integrated Interleaved Transformer in an Isolated Full-Bridge Buck Converter’, Journal of Circuits, Systems and Computers, Vol. 33, No. 09, pp. 2450168, 2024.
- A. Namoune, M. R. Benzidane, R. Taleb, A. Boukortt, Z. Benbouzid, M. Benyamina, ‘Design and Simulation of a High-Efficiency Micro-Transformer for Photovoltaic Application’, Electric Power Components and Systems, pp. 1-17, 2024.
- Y. Sun, H. Cai, J. Li, S. Ma, Y. Jin, W. Wang, J. Chen, M. Miao, L. Hu, S. He, ‘Design, Fabrication and Characterization of a Novel TSV Interposer Integrated Inductor for RF Applications’, in 2018 IEEE 68th Electronic Components and Technology Conference (ECTC), pp. 2492-2497, IEEE, 2018.
- A. Namoune, R. Taleb, N. Mansour, M. R. Benzidane, A. Boukortt, ‘Integrated Through-Silicon-Via-Based Inductor Design in Buck Converter for Improved Efficiency’, Electrical Engineering & Electromechanics, Vol. 6, pp. 54-57, 2023.
- A. Namoune, R. Melati, M. R. Benzidane, P. Spiteri, A. Boukortt, ‘Substrate Thickness Effect on the Integrated Interleaved Transformer in RF’, Scientific Bulletin -Politehnica University of Bucharest Electrical Engineering and Computer Science, Vol. 85, No. 3, pp. 377-392, 2023
- P. C.P. Chao, C. K. Cheng, C. H. Kuan, ‘Optimizing an on‑chip boost DC–DC converter with an on‑chip or on‑board inductor’, Microsyst Technol, Vol. 21, pp:2727–2735, 2015.
- A. Namoune, R. Taleb, M.R. Benzidane, ‘Design and simulation of integrated spiral inductor a boost converter for photovoltaic application’, Ingeniería Energética, No. 1, pp. 1-12, 2023.
- A. Namoune, R. Taleb, A. Derrouazin, A. Belboula, A. Hamid, “Integrated square shape inductor with magnetic core in a buck converter DC-DC”, Przeglad Elektrotechniczny, Vol. 95, N°.9, 57-61, 2019.
- A. Namoune, R. Taleb, N. Mansour, A. Belboula, “Design and modeling of integrated octagonal shape inductor with substrate silicon in a buck converter”, Indonesian Journal of Electrical Engineering and Informatics (IJEEI), Vol. 7, N°. 3, 527-534. 2019.
- S. Liu, L. Zhu, F. Allibert, I. Radu, X. Zhu, Y. Lu, ‘Physical Models of Planar Spiral Inductor Integrated on the High-Resistivity and Trap-Rich Silicon-on-Insulator Substrates’, IEEE Transactions on electron Devices; Vol.64, N°.7, pp:2775–2781, 2017.
- S. A. Kenari, B. A. Ganji, S. Soleimani-Amiri, ‘Design and analysis of a high-quality factor multipath spiral inductor’, Microsystem Technologies, Vol.25, pp:3213–3218, 2019.
- B. Ding, S. Yuan, C. Zhao, and T. Tian, “Modeling and parameter extraction of CMOS on-chip spiral inductors with ground shields,” IEEE Microwave and Wireless Components Letters, vol. 27, no. 5, pp. 431–433, May 2017.
- A. Meshkat, R. Dehghani, H. Farzanehfard, S. A. Khajehoddin, ‘Improved On-Chip Inductor Design for Fully Integrated Voltage Regulators’, IEEE Journal of emerging and selected topics in power electronics, Vol. 10, No. 6,pp. 7397-7409, 2022.
- F. Khan, M. I. Younis, ‘Investigation of on-chip integrated inductors fabricated in SOI-MUMPs for RF MEMS ICs’, Analog Integrated Circuits and Signal Processing, Vol.102, pp:585–591, 2020.
- V. Issakov, S. Kehl-Waas, S. Breun, ‘Analytical Equivalent Circuit Extraction Procedure for Broadband Scalable Modeling of Three-Port Center-Tapped Symmetric On-Chip Inductors’ IEEE Transactions on circuits and systems–I: Regular papers, vol. 66, No. 9,pp. 3557-3570, 2019.
- H. K. Kannojia, A. Sidhique, A. S. Shukla, J. Pednekar, S. Gupta, P. Dixit,‘ Design and fabrication of through-glass via (TGV) based 3D spiral inductors in fused silica substrate’ Microsystem Technologies, Vol.28, pp:955–964, (2022).
- T. Kifle, S. Chandra, S. K. Koul, ‘Model extraction of micro-machined planar inductors implemented on alumina substrate’, Microsystem Technologies, Vol. 21, pp:2407–2413, 2015.
- D. Chen, Y. Wu, H. Liu, W.-Y. Yin, K. Kang, ‘A Scalable Model of On-Chip Inductor Including Tunable Dummy Metal Density Factor’, IEEE Transactions on components, packaging and manufacturing technology, Vol. 9, No. 2, 2019.