Skip to main content
Have a personal or library account? Click to login
Analysis of Heat Transfer Coefficients for a Micro-Jet Heat Exchanger Cover

Analysis of Heat Transfer Coefficients for a Micro-Jet Heat Exchanger

Open Access
|Sep 2026

References

  1. Mikielewicz D., Mikielewicz J. Surface cooling using axially symmetric liquid jets. Gdańsk, Wydawnictwo Politechniki Gdańskiej, 2005. (In Polish)
  2. Grzebielec A, Rusowicz A, Szelągowski A. Air purification in industrial plants producing automotive rubber components in terms of energy efficiency. Open Engineering 2017:7:1. https://doi.org/10.1515/eng-2017-0015
  3. Robinson A. J., Schnitzler E. An experimental investigation of free and submerged miniature liquid jest array impingement heat transfer. Experimental Thermal and Fluid Science 2007:32(1):1-13. https://doi.org/10.1016/j.expthermflusci.2006.12.006
  4. San J.-Y., Chen J.-J. Effects of jet-to jest spacing and jest height on heat transfer characteristics of an impinging jet array. International Journal of Heat and Mass Transfer 2014:71:8-17.https://doi.org/10.1016/j.ijheatmasstransfer.2013.11.079
  5. Łapka P., Ciepliński A., Rusowicz A. Numerical model and analysis of heat transfer during microjets array impingement. Energy 2020:203. https://doi.org/10.1016/j.energy.2020.117879
  6. Aldabbagh L. B. Y., Mohamad A. A. Effect of jet-to-plate spacing in laminar array jets impinging. Heat and Mass Transfer 2007:43:265-273. https://doi.org/10.1007/s00231-006-0109-7
  7. Angioletti M., Di Tommaso R. M., Nino E., Ruocco G. Simultaneous visualization of flow field and evaluation of local heat transfer by transitional impinging jets. International Journal of Heat and Mass Transfer 2003:46(10):1703-1713. https://doi.org/10.1016/S0017-9310(02)00479-9
  8. Browne E. A., Michna G. J., Jensen M. K., Peles Y. Experimental investigation of single-phase microjet array heat transfer. Journal of Heat Transfer 2010:132(4). https://doi.org/10.1115/1.4000888
  9. San J.-Y, Lai M.-D. Optimum jet-to-jet spacing of heat transfer for staggered arrays of impinging air jets. International Journal of Heat and Mass Transfer 2001:44(21):3997-4007. https://doi.org/10.1016/S0017-9310(01)00043-6
  10. Muszyński T., Andrzejczyk R. Applicability of arrays of microjet heat transfer correlations to design compact heat exchangers. Applied Thermal Engineering 2016:100:105-113. https://doi.org/10.1016/j.applthermaleng.2016.01.120
  11. Kotrys-Działak D. Efficiency of Heat Exchanger Systems Working with Nanofluids. Environmental and Climate Technologies 2026:30(1):122-141. https://doi.org/10.2478/rtuect-2026-0009
  12. Michna G. J., Browne E. A., Peles Y., Jensen M. K. The effect of area ratio on microjet array heat transfer, International Journal of Heat and Mass Transfer 2011:54(9–10):1782-1790. https://doi.org/10.1016/j.ijheatmasstransfer.2010.12.038
  13. Fan Ye, Jian Sun, Jie Li, Renping Zhang. Comparative Study on Flow and Heat Transfer Characteristics of Four Array Rib Micro-Jet Heat Sinks Based on Chip Cooling. ASME Journal of Thermal Science and Engineering Applications 2026:18:101011. https://doi.org/10.1115/1.4071342
  14. Garimella S. V., Nenaydykh B. Nozzle-geometry effects in liquid jest impingement heat transfer. International Journal of Heat and Mass Transfer 1996:39(14):2915-2923. https://doi.org/10.1016/0017-9310(95)00382-7
  15. Pavlenko A. Study of the Influence of Temperature and Pressure on the Intensity of Gas Hydrate Formation. Environmental and Climate Technologies 2024:28(1):724-737. https://doi.org/10.2478/rtuect-2024-0056
  16. Li C.-Y., Garimella S. V. Prandtl-number effects and generalized correlations for confined and submerged jet impingement. International Journal of Heat and Mass Transfer 2001:44(18):3471-3480. https://doi.org/10.1016/S0017-9310(01)00003-5
  17. McGlen R. J., Jachuck R., Lin S. Integrated thermal management techniques for high power electronic devices. Applied Thermal Engineering 2004:24:1143-1156. https://doi.org/10.1016/j.applthermaleng.2003.12.029
  18. Meola C. A new correlation of Nuselt number for impinging jets. Heat Transfer Engineering 2009:30(3):221-228. https://doi.org/10.1080/01457630802304311
  19. Tie P., Li Q., Xuan Y. Investigation on the submerged liquid jest arrays impingement cooling. Applied Thermal Engineering 2011:31:2757-2763. https://doi.org/10.1016/j.applthermaleng.2011.04.048
  20. Womac D. J., Incropera F. P., Ramadhyani S. Correlating equations for impingement cooling of small heat sources with multiple circular liquid jets. Journal of Heat Transfer 1994:116:482–486. https://doi.org/10.1115/1.2911423
  21. Whelan B. P., Robinson A. J. Nozzle geometry effects in liquid jet array impingement. Applied Thermal Engineering 2009:29:2211–2221. https://doi.org/10.1016/j.applthermaleng.2008.11.003
  22. Yuan-Yang L, Zhen-Hua L, Guo-Shan W., Le P. Experimental study on critical heat flux of high-velocity circular jet impingement boiling on the nano-characteristic stagnation zone. International Journal of Heat and Mass Transfer 2013:67:560–568. https://doi.org/10.1016/j.ijheatmasstransfer.2013.08.058
DOI: https://doi.org/10.2478/rtuect-2026-0028 | Journal eISSN: 2255-8837 (formerly 2255-8845) | Journal ISSN: 1691-5208
Language: English
Page range: 422 - 432
Submitted on: Mar 17, 2026
Accepted on: Jun 29, 2026
Published on: Sep 11, 2026
Published by: Riga Technical University
In partnership with: Paradigm Publishing Services
Publication frequency: Volume open

© 2026 Artur Rusowicz, Andrzej Grzebielec, published by Riga Technical University
This work is licensed under the Creative Commons Attribution 4.0 License.