References
- [1] Locmelis K., et al. Industrial Energy Efficiency Towards Green Deal Transition. Case of Latvia. Environmental and Climate Technologies 2021:25:42–57. https://doi.org/10.2478/rtuect-2021-000410.2478/rtuect-2021-0004
- [2] European Union. Energy and Climate framework 2030, European Council 23/24 October 2014 – Conclusions. Brussels: EUCO, 2014:169/14.
- [3] World Green Building Council. New report: the building and construction sector can reach net zero carbon emissions by 2050 [Online]. [Accessed 11.03.2021]. Available: https://www.worldgbc.org/news-media/WorldGBC-embodied-carbon-report-published
- [4] Vamza I., et al. Life Cycle Assessment of Reprocessed Cross Laminated Timber in Latvia. Environmental and Climate Technologies 2021:25:58–70. https://doi.org/10.2478/rtuect-2021-000510.2478/rtuect-2021-0005
- [5] Energy efficiency in traditional buildings. Dublin: Government of Ireland, 2010.
- [6] Sinka M., et al. Comparative life cycle assessment of magnesium binders as an alternative for hemp concrete. Resources, Conservation and Recycling 2018:133:288–299. https://doi.org/10.1016/j.resconrec.2018.02.02410.1016/j.resconrec.2018.02.024
- [7] Sinka M., et al. Bio-based construction panels for low carbon development. Energy Procedia 2018:147:220–226. https://doi.org/10.1016/j.egypro.2018.07.06310.1016/j.egypro.2018.07.063
- [8] Namsone, E., Šahmenko, G. and Korjakins, A. Durability Properties of High Performance Foamed Concrete. Procedia Engineering 2017:172:760–7. https://doi.org/10.1016/j.proeng.2017.02.12010.1016/j.proeng.2017.02.120
- [9] Zahari N. M., et al. Foamed Concrete: Potential Application in Thermal Insulation. Proceedings of MUCEET2009 Malaysian Technical Universities Conference on Engineering and Technology 2009:47–52.
- [10] Namsone E., et al. The environmental impacts of foamed concrete production and exploitation. IOP Conference Series: Materials Science and Engineering 2017:251:012029. https://doi.org/10.1088/1757-899X/251/1/01202910.1088/1757-899X/251/1/012029
- [11] Zimele Z., et al. Life cycle assessment for masonry exterior wall assemblies made of traditional building materials. IOP Conference Series: Materials Science and Engineering 2019:660:012042. https://doi.org/10.1088/1757-899X/660/1/01204210.1088/1757-899X/660/1/012042
- [12] Zimele Z., et al. Life Cycle Assessment of Foam Concrete Production in Latvia. Environmental and Climate Technologies 2019:23:70–84. https://doi.org/doi:10.2478/rtuect-2019-008010.2478/rtuect-2019-0080
- [13] Collet F. Hygric and Thermal Properties of Bio-aggregate Based Building Materials. In Amziane S., Collet F. (eds) Bio-Aggregates Based Building Materials. State-of-the-Art Report of the RILEM Technical Committee 236-BBM. Dordrecht: Springer Netherlands, 2017:125–147. https://doi.org/10.1007/978-94-024-1031-0_610.1007/978-94-024-1031-0_6
- [14] Amziane S., Arnaud L., Challamel N. Bio-aggregate-based Building Materials. John Wiley & Sons, Inc., 2013. https://doi.org/10.1002/978111857680910.1002/9781118576809
- [15] Jami T., Karade S. R., Singh, L. P. A review of the properties of hemp concrete for green building applications. Journal of Cleaner Production 2019:239:17852. https://doi.org/10.1016/j.jclepro.2019.11785210.1016/j.jclepro.2019.117852
- [16] Ahlberg J., Georges E., Norlén M. The potential of hemp buildings in different climates and the hempcrete building system The potential of hemp buildings in different climates. Bs. thesis. Uppsala: Uppsala Universitet, 2014.
- [17] Bourdot A., et al. Characterization of a hemp-based agro-material: Influence of starch ratio and hemp shive size on physical, mechanical, and hygrothermal properties. Energy and Buildings 2017:153:501–512. https://doi.org/10.1016/j.enbuild.2017.08.02210.1016/j.enbuild.2017.08.022
- [18] Florentin Y., et al. A life-cycle energy and carbon analysis of hemp-lime bio-composite building materials. Energy and Buildings 2017:156:293–305. https://doi.org/10.1016/j.enbuild.2017.09.09710.1016/j.enbuild.2017.09.097
- [19] Namsone E., et al. Thermal conductivity and frost resistance of foamed concrete with porous aggregate. Environment, Technology, Resources. Proceedings of the International Scientific and Practcal Conference 2017:222–228. https://doi.org/10.17770/etr2017vol3.262510.17770/etr2017vol3.2625
- [20] Kavita M., Tarjani C. Comparison on Auto Aerated Concrete to Normal Concrete. Recent Advances in Civil Engineering for Global Sustainability 2016:90–94.
- [21] Šahmenko G., Korjakins A., Namsone E. High Performance Foam Concrete Produced in Turbulence Mixers. Proceedings of International Conference Towards a Sustainable Built Environment: SBE16 Malta 2016:71–78.
- [22] Velichko E., Tskhovrebov E., Shevchenko A. Environmental safety providing during heat insulation works and using thermal insulation materials. MATEC Web of Conferences 2017:106:03009. https://doi.org/10.1051/matecconf/20171060300910.1051/matecconf/201710603009
- [23] Stec A. A., Hull T. R. Assessment of the fire toxicity of building insulation materials. Energy and Buildings 2011:43(2–3):498–506. https://doi.org/10.1016/j.enbuild.2010.10.01510.1016/j.enbuild.2010.10.015
- [24] McGregor F., et al. Conditions affecting the moisture buffering measurement performed on compressed earth blocks. Building and Environment 2014:75:11–18. https://doi.org/10.1016/j.buildenv.2014.01.00910.1016/j.buildenv.2014.01.009
- [25] Liuzzi S., et al. Hygrothermal behaviour and relative humidity buffering of unfired and hydrated lime-stabilised clay composites in a Mediterranean climate. Building and Environment 2013:61:82–92. https://doi.org/10.1016/j.buildenv.2012.12.00610.1016/j.buildenv.2012.12.006
- [26] Hussain A., et al. Development of novel building composites based on hemp and multi-functional silica matrix. Composites Part B: Engineering 2019:156:266–273. https://doi.org/10.1016/j.compositesb.2018.08.09310.1016/j.compositesb.2018.08.093
- [27] Walling S. A., Provis J. L. Magnesia-Based Cements: A Journey of 150 Years, and Cements for the Future? Chemical Reviews 2016:116:4170–4204. https://doi.org/10.1021/acs.chemrev.5b0046310.1021/acs.chemrev.5b0046327002788
- [28] Cérézo V. Propriétés mécaniques, thermiques et acoustiques d’un matériau à base de particules végétales : approche expérimentale et modélisation théorique (Mechanical, thermal and acoustic properties of a material based on plant particles: experimental approach and theoretical modeling.). Lyon: L’Institut National Des Sciences Appliquées de Lyon 2005. (in French)
- [29] Namsone E., et al. Reduction of the capillary water absorption of foamed concrete by using the porous aggregate. IOP Conference Series: Materials Science and Engineering 2017:251:012030. https://doi.org/10.1088/1757-899X/251/1/01203010.1088/1757-899X/251/1/012030