References
- [1] Policy Pathways Modernising Building Energy Codes. Int. Energy Agency, 2013. [Online]. [Accessed: 01.02.2019] Available: https://cleanenergysolutions.org/sites/default/files/documents/2013-08-20-modernising-building-energy-codes.pdf
- [2] Albatayneh A., Alterman D., Page A., Moghtaderi B. The significance of building design for the climate. Environmental and Climate Technologies 2018:22:165–178. doi:10.2478/rtuect-2018-001110.2478/rtuect-2018-0011
- [3] Historical building types and combinations of structural solutions and main driving forces promoting renovation of historic buildings based on case studies. Report. EU project Robust Internal Thermal Insulation of Historic Buildings (RiBuild), project No. 637268: 2015.
- [4] De Rosa M., Bianco V., Scarpa F., and Tagliafico L. A. Heating and cooling building energy demand evaluation; a simplified model and a modified degree days approach. Applied Energy 2014:128:217–229. doi:10.1016/j.apenergy.2014.04.06710.1016/j.apenergy.2014.04.067
- [5] European Commission. Directive 2010/31/EU Of The European Parliament And Of The Council of 19 May 2010 on the energy performance of buildings (recast). Official Journal of the European Union 2010:153.
- [6] Ratnieks J., Jakovics A., Gendelis S. Wall assemblies U-value calculation in test buildings using constant power heating. Energy Procedia 2018:147:207–213. doi:10.1016/j.egypro.2018.07.06110.1016/j.egypro.2018.07.061
- [7] Albatayneh A., Alterman D., Page A., Moghtaderi B. The Significance of Temperature Based Approach Over the Energy Based Approaches in the Buildings Thermal Assessment. Environmental and Climate Technologies 2017:19:39–50. doi:10.1515/rtuect-2017-000410.1515/rtuect-2017-0004
- [8] Franzoni E. Rising damp removal from historical masonries: A still open challenge. Constr. Build. Mater. 2014:54:123–136. doi:10.1016/j.conbuildmat.2013.12.05410.1016/j.conbuildmat.2013.12.054
- [9] Krawczyk D. A., Wadolowska B. Analysis of indoor air parameters in an education building. Energy Procedia 2018:147:96–103. doi:10.1016/j.egypro.2018.07.03810.1016/j.egypro.2018.07.038
- [10] Jimenez-Bescos C., Prewett R. Monitoring IAQ and thermal comfort in a conservation area low energy retrofit. Energy Procedia 2018:147:195–201. doi:10.1016/j.egypro.2018.07.05510.1016/j.egypro.2018.07.055
- [11] Adhikari R., Lucchi E., Pracchi V. Experimental measurements on thermal transmittance of the opaque vertical walls in the historical buildings. PLEA2012 Conf. Oppor. Limits Needs Towar. an Environ. responsible Archit., 2012.
- [12] Hola A. Measuring of the moisture content in brick walls of historical buildings – the overview of methods. IOP Conf. Ser. Mater. Sci. Eng. 2017:251:012067. doi:10.1088/1757-899X/251/1/01206710.1088/1757-899X/251/1/012067
- [13] Rosina E. When and how reducing moisture content for the conservation of historic building. A problem solving view or monitoring approach? J. Cult. Herit. 2018:31:S82–S88. doi:10.1016/j.culher.2018.03.02310.1016/j.culher.2018.03.023
- [14] Barreira E., Almeida R. M. S. F., Delgado J. M. P. Q. Infrared thermography for assessing moisture related phenomena in building components. Constr. Build. Mater. 2016:110:251–269. doi:10.1016/j.conbuildmat.2016.02.02610.1016/j.conbuildmat.2016.02.026
- [15] Jana seta [Online]. [Accessed 15.03.2019]. Available: https://www.kartes.lv/lv/
- [16] Practice handbook for multifunction measuring meter T3000 (EN) [Online]. [Accessed: 01.02.2019] Available: https://uk.trotec.com/fileadmin/downloads/Multifunktion/T3000/TRT-PH-T3000-WM-001-EN.pdf
- [17] LEGMC [Online]. [Accessed: 10.03.2019] Available: https://www.meteo.lv/