References
- 1. SAHUL, M., VYSKOČ, M., ČAPLOVIČ Ľ., M. PAŠÁK, M. 2017. Journal of Matterials Engineering and Performance. Disk laser weld brazing of AW5083 aluminum alloy with titanium grade 2, 26(3). 1346-1357. ISSN 1059-949510.1007/s11665-017-2529-6
- 2. YAKO, T., FUKUI, K., NAITO, M., TAKEDA, M. 2018. Precipitation behavior in an Al-Mg alloy with high Mg composition. Materials Science and Metallurgy Engineering, 5(1), 1-4. ISSN 2373-347010.12691/msme-5-1-1
- 3. BEIRANVAND, Z., GHAINI, F., MOOSAVY, H., SHEIKHI, M., TORKAMANY, M., MORADI, M. 2020. The relation between magnesium evaporation and laser absorption and weld penetration in pulsed laser welding of aluminum alloys: Experimental and numerical investigations. Optics & Laser Technology, Vol. 128. 106170.ISSN 0030-399210.1016/j.optlastec.2020.106170
- 4. KE, W., BU, X., OLIVEIRA, J., XU, W., WANG, Z., ZENG, Z. 2020. Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy. Optics & Laser Technology, Vol. 133. 106540. ISSN 0030-399210.1016/j.optlastec.2020.106540
- 5. TAO, W., YANG, Sh., 2020. Weld zone porosity elimination process in remote laser welding of AA5182-O aluminum alloy lap-joints. Journal of Materials Processing Technology, Vol. 286, 116826. ISSN 0924-013610.1016/j.jmatprotec.2020.116826
- 6. ZHANG, R., STEINER, M., AGNEW, S., KAIRY, S., DAVIES, C., BIRBILIS. N. 2017. Experiment-based modelling of grain boundary β-phase (Mg2Al3) evolution during sensitisation of aluminum alloy AA5083. Scientific Reports 7, Article number 2961. ISSN 2045-232210.1038/s41598-017-03090-4546282528592869
- 7. ISLAM, M., MOSTAFA, A., MEDRAJ, M. 2014. Essential magnesium alloys binary phase diagrams and their thermochemical data. Journal of Materials, 704283, 33 p. ISSN 1563-514710.1155/2014/704283
- 8. WANDERKA, N.; SCHFFMANN, R.; BANHART, J. 2007. Characterization of precipitates in aluminum based alloy AW 6016. Surf. Interface Anal., 39, 221–226.
- 9. AHN, J., HE, E., CHEN, L., DEAR, J., DAVIES, C. 2017. The effect of Ar and He shielding gas on fibre laser weld shape and microstructure in AA 2024-T3. Journal of Manufacturing Processes 29, 62–73. ISSN 1526-612510.1016/j.jmapro.2017.07.011
- 10. KATAYAMAA, S., KAWAHITOA, Y., MIZUTA, M. 2010. Elucidation of laser welding phenomena and factors affecting weld penetration and welding defects. In Physics Procedia 5, 9–17. ISSN 1875-389210.1016/j.phpro.2010.08.024
- 11. REISGEN, U., SCHLESER, M., MOKROV, O., AHMED, E. 2010. Shielding Gas Influences on Laser Weldability of Tailored Blanks of Advanced Automotive Steels. Applied Surface Science, 257, p 1401-1406. ISSN 0169-433210.1016/j.apsusc.2010.08.042
- 12. YANG, D., LI, X., HE, D., NIE, Z., HUANG, H. 2012. Optimization of weld bead geometry in laser welding with filler wire process using Taguchi’s approach. Optics & Laser Technology, 44 (7), pp. 2020-2025. ISSN 0030-399210.1016/j.optlastec.2012.03.033
- 13. VYSKOČ M., SAHUL, M., DOMÁNKOVÁ, M., JURČI, P., SAHUL, M., VYSKOČOVÁ, M., MARTINKOVIČ, M. 2020. The Effect of Process Parameters on the Microstructure and Mechanical Properties of AW5083 Aluminum Laser Weld Joints. Metals 2020, 10, 1443.
- 14. CHAN, C., MAN, H. 2015. Effect of Process Parameters and Heat Input on Weld Bead Geometry of Laser Welded Titanium Ti-6Al-4V Alloy. Lasers Eng., 30, 247–265.
- 15. TADAMALLE, A., REDDY, Y., RAMJEE, E. 2013. Influence of laser welding process parameters on weld pool geometry and duty cycle. Advances in Production Engineering and Management, 8 (1), pp 52-60.
- 16. EL-BATAHGY, A. 2012. Effect of laser welding parameters on fusion zone shape and solidification structure of austenitic stainless steels. Optics & Laser Technology,44(7), pp. 2020-2025.
- 17. MATSUOKA, S., OKAMOTO, Y., OKADA, A. 2013. Influence of Weld Bead Geometry on Thermal Deformation in Laser Micro-Welding. In Procedia CIRP, Vol. 6, pp. 492-497.
- 18. KUO, T., LIN, Y. 2006. Effects of Shielding Gas Flow Rate and Power Waveform on Nd:YAG Laser Welding of A5754-O Aluminum Alloy. In Materials Transactions, 47(5), pp. 1365-1373. ISSN 1347-532010.2320/matertrans.47.1365
- 19. YANG, G., MA, J., CARLSON, B., WANG, H., KOVACEVIC, R. 2017. Materials & Design, Vol. 123, pp 197-210. ISSN 0264-127510.1016/j.matdes.2017.03.050
- 20. ZHOU, L., HYER, H., PARK, S., PAN, H., BAI, Y., RICE, K., SOHN. Y. 2019. Microstructure and mechanical properties of Zr-modified aluminum alloy 5083 manufactured by laser powder bed fusion, Additive Manufacturing, 28, pp. 485-496. ISSN 2214-860410.1016/j.addma.2019.05.027
- 21. GOSWAMI, R., SPANOS, G., PAO, P., HOLTZ. R. 2010. Precipitation behavior of the β phase in Al-5083. Materials Science and Engineering A 527, pp. 1089-1095. ISSN 0921-509310.1016/j.msea.2009.10.007
- 22. TAMASGAVABARI, R., EBRAHIMI, A., ABBASI, S., YAZDIPOUR, A. 2020. Effect of harmonic vibration during gas metal arc welding of AA-5083 aluminum alloy on the formation and distribution of intermetallic compounds. Journal of Manufacturing Processes, Vol. 49, pp. 413-422. ISSN 1526-612510.1016/j.jmapro.2019.12.003
- 23. RUDY, J., RUPERT, E. 1970. Effects of Porosity on Mechanical Properties of Aluminum Welds. Weld. J.,49(7), pp. 322–336.
- 24. WU, S., YU, X., ZUO, R., ZHANG, W., XIE, H., JIANG, J. 2013. Porosity, Element Loss and Strength Model on Softening Behavior of Hybrid Laser Arc Welded Al-Zn-Mg-Cu Alloy with Synchrotron Radiation Analysis. Weld. J.,92(3), pp. 64–71.
- 25. SATO, S., MATSUMOTO, J., OKOSHI, N. 1976. Effects of Porosity on the Fatigue Strength of 5083 Alloy Butt Welds. J. Jpn. Inst. Light Met., 31(4), pp. 398–405.
- 26. YADOLLAHI, A., SHAMSAEI, N. 2017. Additive Manufacturing of Fatigue Resistant Materials Challenges and Opportunities. Int. J. Fatigue, 98, pp. 14–31.
- 27. VYSKOČ, M., SAHUL, M., SAHUL, M. 2018. Effect of Shielding Gas on the Properties of AW 5083 Aluminum Alloy Laser Weld Joints. Journal of Materials Engineering and Performance, Vol. 27, pp. 2993–3006.
- 28. TAKAHASHI, B., MEHMETLI, B., SATO, S. 1998. Influence of Shielding Gas and Laser Irradiation Conditions on Porosity Formation in CO2 Laser Welding of Aluminium Alloy. Weld. Int., 12(5), pp. 347–353.
- 29. GLOWACKI, M. 1999. The Effects of the Use of Different Shielding Gas Mixtures in Laser Welding of Metals. J. Phys. D Appl. Phys., 28(10), p. 2051.
- 30. KATSUNA, M., QU, Y. 1998. Study on Porosity Formation in Laser Welds of Aluminum Alloys (Report 2) Mechanism of Porosity Formation by Hydrogen and Magnesium. J. Light Met. Weld. Constr., 36, pp. 1–17.
- 31. HUANG, Y., SHEN, C., JI, X., LI, F., ZHANG, Y., HUA, X. 2020. Correlation between gas-dynamic behaviour of a vapour plume and oscillation of keyhole size during laser welding of 5083 Al-alloy. J. Mater. Process. Technol., 283, 116721.
- 32. PADILLA, E., JAKKALI, V., JIANG, L., CHAWLA, N. 2016. Quantifying the Effect of Porosity on the Evolution of Deformation and Damage in Sn-Based Solder Joints by X-ray Microtomography and Microstructure-Based Finite Element Modeling. Acta Mater., 60, pp. 4017–4026.
- 33. PROKIC-CVETKOVIC, R., KASTELEC-MACURA, S. MILOSAVLJEVIC, A., POPOVIC, O., BURZIC, M. 2010. The Effect of Shielding Gas Composition on the Toughness and Crack Growth Parameters of AlMg4,5Mn Weld Metals, J. Min. Metall. Sect. B Metall., 46(2B), pp. 193–202. ISSN 2217-717510.2298/JMMB1002193P
- 34. BANDI. B., DINDA, S., KAR, J., ROY, G., SRIRANGAM, P. 2018. Effect of weld parameters on porosity formation in electron beam welded Zircaloy-4 joints: X-ray tomography study. In Vacuum, Vol. 158, pp. 172-179. ISSN 0042-207X10.1016/j.vacuum.2018.09.060