Have a personal or library account? Click to login
Effect of the Friction and Reduction Angle on the Accuracy of Cold Drawing Steel Tubes STL Model Based on FEM Analysis Cover

Effect of the Friction and Reduction Angle on the Accuracy of Cold Drawing Steel Tubes STL Model Based on FEM Analysis

Research Papers Faculty of Materials Science and Technology Slovak University of Technology
Volume 28 (2020): Issue 47 (September 2020)
By: Ladislav Morovič,  Michaela Kritikos,  Róbert Sobota,  Mária Kapustová,  Ján Urminský,  Eva Buranská and  Martin Ridzoň  
Open Access
|Dec 2020

References

  1. [1] KOUTELIERIS, A., KIOUPI, K., HARALAMPOUS, O., KITSAKIS, K., VAXEVANIDIS, N., KECHAGIAS, J. 2017. Simulation of extrusion of high density polyethylene tubes. In: MATEC Web of Conferences. 21st Innovative Manufacturing Engineering & Energy International Conference: Romania, Iasi10.1051/matecconf/201711204004
    Search in Google ScholarBack to article
  2. [2] BERE, P., DUDESCU, M. C., BALC, N., BERCE, P., IURIAN, A. M., NEMES, O. 2014. Design and Analysis of Carbon/epoxy Composite Bicycle Handlebar. Materiale Plastice,51(2), 145-149. Print ISSN : 0025-5289. Online ISSN: 2668-8220
    Search in Google ScholarBack to article
  3. [3] CECLAN, V. A., GROZAV, S. D., KURIC, I. 2017. Research on inner surface of hydroformed tubes. Advances in Science and Technology – Research Journal,11(4), 311-317. ISSN 2299-862410.12913/22998624/80900
    Search in Google ScholarBack to article
  4. [4] BELLA, P., BUČEK, P., RIDZOŇ, M., MOJŽIŠ, M., PARILÁK, L. 2016. Influence of die geometry on drawing force in cold drawing of steel tubes using numerical simulation. Key Engineering Materials, 716, 708–712. ISSN 1662-979510.4028/www.scientific.net/KEM.716.708
    Search in Google ScholarBack to article
  5. [5] MISHRA, G. K., SINGH, P. 2015. Simulation of Seamless Tube Cold Drawing Process using Finite Element Analysis. International Journal for Scientific Research & Development, 3(4), 1285–1291. ISSN 2321-0613
    Search in Google ScholarBack to article
  6. [6] PATIL, M., SINGH, V., SIMHACHALAM B., SRINIVAS, K. 2019. Effect of lubrication technique in tube drawing. Materials Today: Procceedings, 28, 426–431. ISSN 2214-785310.1016/j.matpr.2019.10.027
    Search in Google ScholarBack to article
  7. [7] KAPUSTOVÁ, M., SOBOTA, R. 2019. The Research of Influence of Strain Rate in Steel Tube Cold Drawing Processes Using FEM Simulation. Materials Science Forum, 952, 235–242. ISSN 1662-975210.4028/www.scientific.net/MSF.952.235
    Search in Google ScholarBack to article
  8. [8] KUMAR, P., AGNIHOTRI, G. 2013. Cold Drawing Process – A Review. International Journal of Engineering Research and Applications (IJERA), 3(3), 988–994. ISSN 2248-9622
    Search in Google ScholarBack to article
  9. [9] GATTMAH, J., OZTURK, F., ORHAN, S. 2020. A new development of measurement technique for residual stresses generated by the cold tube drawing process with a fixed mandrel. nternational Journal of Advanced Manufacturing Technology,108(11–12), 3675–3687. ISSN 1433-301510.1007/s00170-020-05645-8
    Search in Google ScholarBack to article
  10. [10] SHEU, J. J., LIN, S. Y., YU, C. H. 2014. Optimum die design for single pass steel tube drawing with large strain deformation. In: Procedia Engineering. 11th International Conference on Technology of Plasticity, ICTP: Japan, Nagoya Congress Center, Nagoya, pp. 688–693. ISSN 1877-705810.1016/j.proeng.2014.10.061
    Search in Google ScholarBack to article
  11. [11] BÉLAND, J. F., FAFARD, M., RAHEM, A., D’AMOURS, G., CÔTÉ, T. 2011. Optimization on the cold drawing process of 6063 aluminium tubes. Applied Mathematical Modelling,35(11), 5302–5313. ISSN 0307-904X10.1016/j.apm.2011.04.025
    Search in Google ScholarBack to article
  12. [12] NECPAL, M., MARTINKOVIČ, M., VÁCLAV, Š. 2018. Determination of the Coefficient of Friction Under Cold Tube Drawing Using FEM Simulation and Drawing Force Measurement. Research Papers Faculty of Materials Science and Technology Slovak University of Technology in Bratislava, 26(42), 29–34. ISSN 1338-053210.2478/rput-2018-0003
    Search in Google ScholarBack to article
  13. [13] PALENGAT, M., GUIRAUD, O., MILLET, C., CHAGNON, G., FAVIER, D. 2007. Tube Drawing Process Modelling By A Finite Element Analysis. In: Materials & Processes for Medical Devices Conference. United States, Palm Desert, CA, pp. 65–72. hal-0197897610.1063/1.2740893
    Search in Google ScholarBack to article
  14. [14] PALENGAT, M., CHAGNON, G., FAVIER, D., LOUCHE, H., LINARDON, C., PLAIDEAU, C. 2013. Cold drawing of 316L stainless steel thin-walled tubes: Experiments and finite element analysis. International Journal of Mechanical Sciences, 70, 69–78. ISSN 0020-740310.1016/j.ijmecsci.2013.02.003
    Search in Google ScholarBack to article
  15. [15] ORHAN, S., ÖZTÜRK, F., GATTMAH, J. 2016. Effects of the semi die/plug angles on cold tube drawing with a fixed plug by FEM for AISI 1010 steel tube, In: 4th International Symposium on Innovative Technologies in Engineering and Science. ISITES2016: Turkey, Antalya, pp. 1065–1074. ISSN 1301-404810.16984/saufenbilder.291270
    Search in Google ScholarBack to article
  16. [16] NEVES, F. O., BUTTON, S. T., CAMINAGA, C., GENTILE, F. C. 2005. Numerical and experimental analysis of tube drawing with fixed plug. ournal of the Brazilian Society of Mechanical Sciences and Engineering,27(4), 426–431. ISSN 1678-587810.1590/S1678-58782005000400011
    Search in Google ScholarBack to article
  17. [17] KARNEZIS, P., FARRUGIA, D. C. J. 1998. Study of cold tube drawing by finite-element modelling. Journal of Materials Processing Technology, 80–81, 690–694. ISSN 0924-0136.10.1016/S0924-0136(98)00127-7
    Search in Google ScholarBack to article
  18. [18] www.deform.com, DEFORM-3D [Online]. [Accessed: 09-2020]. Available at https://www.deform.com/products/deform-3d/
    Search in Google ScholarBack to article
  19. [19] POČTA, B. 1963. Ocelové trubky - I. díl – Bezešvé trubky. (Steel tubes – part I. – Seamless tubes.) 2nd ed. Prague: Státní nakladatelství technické literatury. Slovenské vydavateľstvo technickej literatúry. SNTL.SVTL, 416 p.
    Search in Google ScholarBack to article
DOI: https://doi.org/10.2478/rput-2020-0016 | Journal eISSN: 1338-0532
Journal RSS Feed
Language: English
Page range: 32 - 39
Submitted on: Aug 27, 2020
|
Accepted on: Oct 27, 2020
|
Published on: Dec 12, 2020
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Keywords:
Cold drawing,
tube,
nib,
dimensions,
tolerances,
simulation,
Finite Element Model
Related subjects:
Engineering,
Introductions and overviews,
Engineering, other

© 2020 Ladislav Morovič, Michaela Kritikos, Róbert Sobota, Mária Kapustová, Ján Urminský, Eva Buranská, Martin Ridzoň, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Previous articleVolume 28 (2020): Issue 47 (September 2020)Next article