References
- 1. GÖMÖRY, F. et al. 2013. AC Loss in Pancake Coil Made From 12 mm Wide REBCO Tape. In IEEE Transactions on Applied Superconductivity, 23(3), pp. 6. ISSN 1051-8223.
- 2. SOLOVYOV, M. et al. 2013. Non-uniformity of coated conductor tapes. In Superconductor Science and Technology, 26(11), Art.No. 115013. ISSN 0953-2048.
- 3. PEKARČÍKOVÁ, M. et al. 2014. Investigation of defects in functional layer of high temperature superconducting tapes. In Physica C-Superconductivity and its Applications, Vol. 497, pp. 24-29. ISSN 0921-4534.
- 4. MIŠÍK, J. et al. 2016. Structural study of commercially produced (RE)BCO films. In IEEE Transactions on Applied Superconductivity, 26(3), pp. 804-804. ISSN 1051-8223. DOI: 10.1109/TASC.2016.2516348.10.1109/TASC.2016.2516348
- 5. PEKARČÍKOVÁ, M. et al. 2018. Effect of Mechanical Loading on Coated Conductor Tapes Due to Winding Onto Round Cables. In IEEE Transactions on Applied Superconductivity,28(4), pp. 505-505. ISSN 1051-8223. DOI: 10.1109/TASC.2018.2795894.10.1109/TASC.2018.2795894
- 6. MICHALCOVÁ, E. et al. 2018. Structural modeling of REBCO coated conductor tapes in TORT cables. In IEEE Transactions on Applied Superconductivity, 28(4), pp. 5. ISSN 1051-8223.
- 7. MICHALCOVÁ, E. et al. 2016. Joining of CC Tapes With Lead-Free Solders. In IEEE Transactions on Applied Superconductivity, 26(3), Article 8801104. ISSN 1051-8223. DOI: 10.1109/TASC.2016.2539419.10.1109/TASC.2016.2539419
- 8. DRIENOVSKÝ, M. et al. 2018. Induction Soldering of Coated Conductor High-Temperature Superconducting Tapes With Lead-Free Solder Alloys. In IEEE Transactions On Applied Superconductivity, 28(4), 6601305.
- 9. KONOPKA, P. 2014. Characterization of defects in the structure of non-metallic superconductors. Trnava: MTF STU. 104 pp. Dissertation thesis.
- 10. MIŠÍK, J. 2017. Characterization of fine structure of superconducting layers in high temperature superconducting tapes. Trnava: MTF STU, 93 p. Dissertation thesis.
- 11. CUNINKOVÁ*, E. 2019. Degradation of superconducting tapes by mechanical stress. Trnava: MTF STU. Dissertation thesis (in preparation for defense in 2019). *maiden name MICHALCOVÁ
- 12. SKARBA, M. et al. 2014. Mirko v mikrosvete materiálov: vedecká sci-fi rozprávka (Mirko in the micro-world of materials: a sci-fitale). In Quark, 2, pp. 19-23.
- 13. SKARBA, M. et al. 2016. Supravodivé materiály a ich využitie (Superconductive materials and their application). In Quark, 11, pp. 7-11.
- 14. SKARBA, M. et al. 2017. Levitujúci vlak a smotanová zmrzlina (A levitating train and ice-cream). In Quark, 8, pp. 54.
- 15. KONOPKA, P. et al. 2012. Sample preparation from high temperature superconducting tapes. In International Doctoral Seminar 2012: Proceedings. Smolenice Castle, SR, May 20-22, 2012. Trnava: AlumniPress, pp. 218-227. ISBN 978-80-8096-164-0.
- 16. KONOPKA, P. et al. 2013. Inhomogeneities in the structure of high temperature superconducting layer. In IDS 2013. International Doctoral Seminar 2013 (electronic source): Proceedings of the 8th International Doctoral Seminar (IDS 2013), Dubrovnik, 13-15 May 2013. Zagreb: University of Zagreb, pp. 159-165. CD-ROM. ISBN 978-953-6071-40-1.
- 17. KONOPKA, P. et al. 2013. Investigation of mechanical properties of (RE)BCO base coated conductors. In EUCAS 2013: 11th European Conference on Applied Superconductivity. Italy, Genova. September 15-19, 2013. Abstract Book: European Society for Applied Superconductivity, pp. 382.
- 18. PEKARČÍKOVÁ, M. et al. 2013. Study of crystal orientation in (RE)BCO-based HTS tapes. In EUCAS 2013: 11th European Conference on Applied Superconductivity. Italy, Genoa. September 15-19, 2013. Abstract Book: European Society for Applied Superconductivity, pp. 378.
- 19. SKARBA, M. et al. 2013. Structural inhomogeneities in (RE)BCO layer. In EUCAS 2013: 11th European Conference on Applied Superconductivity. Italy, Genova. September 15-19, 2013. Abstract Book: European Society for Applied Superconductivity, pp. 371.
- 20. CUNINKOVÁ*, E. et al. 2018. Overlap joints of CC tapes tested by thermal cycling and mechanical load. In Coated Conductors for Applications. CCA 2018 (electronic source): Workshop, September 10-13, 2018. Vienna, 1st Issue, pp. 31.
- 21. MICHALCOVÁ, E et al. 2017. Structural modelling of REBCO CC tapes in TORT cables. In EUCAS 2017 (electronic source): 13th European Conference on Applied Superconductivity. Geneva, 17 - 21 September 2017. 1st Iss. [online]. Geneva: European Society for Applied Superconductivity.
- 22. PEKARČÍKOVÁ, M. et al. 2017. Effect of mechanical loading on high temperature superconducting tapes during bending of round cables. In EUCAS 2017 (electronic source): 13th European Conference on Applied Superconductivity. Geneva, 17 - 21 September 2017. 1st Iss. [online]. Geneva: European Society for Applied Superconductivity, 2017.
- 23. PEKARČÍKOVÁ, M. et al. 2018. Investigation of CC tapes with soldered metallic high heat capacity layer suitable for superconducting fault current limiters. In Coated Conductors for Applications. CCA 2018 (electronic source): Workshop 2018. September 10-13, 2018. Vienna, 1st Issue, p. 80.
- 24. ŠOUC, J. et al. 2018. CORC® cable production and its use in the coil winding. In Coated Conductors for Applications. CCA 2018 (electronic source): Workshop 2018. September 10-13, 2018. Vienna, 1st Issue, pp. 16.