References
- 1. ESTREMS, M., ARIZMENDI, M., ZABALETA, A. J., GIL, A. 2015. Numerical method to calculate the deformation of thin rings during turning operation and its influence on the roundness tolerance. Procedia Engineering, Vol. 132, pp. 872-879, DOI: 10.1016/j.proeng.2015.12.57210.1016/j.proeng.2015.12.572
- 2. ESTREMS, M., CARRERO-BLANCO, J., CUMBICUS, W.E., DE FRANCISCO, O., SÁNCHEZ, H.T. 2017. Contact mechanics applied to the machining of thin rings. Procedia Manufacturing, Vol. 13, p. 655-662, DOI: 10.1016/j.promfg.2017.09.13810.1016/j.promfg.2017.09.138
- 3. PEKLINIK, J. 1970. Geometrical adaptive control of manufacturing systems. CIRP Annals 18, pp. 265-272.
- 4. SHAWKY, A., ROSENBERGER, T., ELBESTAWI, M. 1998. Inprocess monitoring and control of thickness error in machining hollow shafts. Mechatronics 8, pp.301-322.
- 5. BRINKSMEIER, E., SÖLTER, J., GROTE, C. 2007. Distortion Engineering – Identification of Causes for Dimensional and Form Deviations of Bearing Rings. CIRP Annals, Vol. 56, Issue 1, pp. 109-112, DOI: 10.1016/j.cirp.2007.05.02810.1016/j.cirp.2007.05.028
- 6. GROTE, C., BRINKSMEIER, E., GARBRECHT, M. 2009. Distortion engineering in turning processes with standard clamping systems. Materialwissenschaft und Werkstofftechnik, Vol. 40, No 5-6, pp. 385-389, DOI: 10.1002/mawe.20090046410.1002/mawe.200900464
- 7. BEEKHUIS, B., STOEBENER, D., BRINKSMEIER, E. 2012. Adapted non-circular soft turning of bearing rings – Impact of process machine interactions on compensation potential. Procedia CIRP 1, pp. 540 – 545
- 8. GÖRÖG, A., MARAČEKOVÁ, M. 2009. Vplyv upínania na odchýlku kruhovitosti pri sústružení rúr. (Effect of clamping on the roundness in turning of tubes.) Novus Scientia 2009, pp. 694-700. ISBN 978-80-553-0305-5
- 9. MARAČEKOVÁ, M., ZVONČAN, M., GÖRÖG, A. 2012. Effect of clamping pressure on parts inaccuracy in turning. Tehnički Vjesnik - Technical Gazette. Vol. 19, No. 3, pp. 509-512. ISSN 1330-3651.
- 10. MARAČEKOVÁ, M., GÖRÖG, A., BEŇO, M. 2011. Odchýlka kruhovitosti pri sústružení rúr. (Roundness deflection in turning of tubes.) Technologické fórum 2011, pp. 47-50. ISBN 978-80-01-04853-5.
- 11. MARAČEKOVÁ, M., GÖRÖG, A., ZVONČAN, M., LAKOTA, S. 2011. Effect of clamping force on parts inaccuracy in turning. TEAM 2011, pp. 107-109. ISBN 978-953-55970-4-9.
- 12. MARAČEKOVÁ, M., GÖRÖG, A. 2011. Vznik nepresností pri sústružení. (Occurence of inacuracies in turning.) Quaere 2011, pp. 262-268. ISBN 978-80-904877-3-4.
- 13. ESTREMS, M., ARIZMENDI, M., CUMBICUS, W. E., LÓPEZ, A. 2015. Measurement of clamping forces in a 3-jaw chuck through an instrumented Aluminium ring. Procedia Engineering, Vol. 132, pp. 456-463, DOI: 10.1016/j.proeng.2015.12.51910.1016/j.proeng.2015.12.519
- 14. SUI, W., ZHANG, D. 2012. Four Methods for Roundness Evaluation. Physics Procedia, Vol. 24, part C, pp. 2159 – 2164. DOI: 10.1016/j.phpro.2012.02.31710.1016/j.phpro.2012.02.317