REVIEW OF SPECIAL STANDARDS IN QUALITY MANAGEMENT SYSTEMS AUDITS IN AUTOMOTIVE PRODUCTION
Open Access
|Jan 2014References
- 1. CAMERON, L. VDA 6.3 Process Audit - an in-depth manufacturing process audit tool in SMMT Industry Forum 2011. Dostupné na internete: http://www.industryforum.co.uk/articles/vda-6-3-process-audit/
- 2. FLYNN, B.B., SCHROEDER, R., SAKAKIBARA, S. 1995. Determinants of quality performance in high- and low-quality plants. Quality Management Journal 2 (Winter), pp. 8-25.
- 3. HIAM, A. 1993. Does quality work? A review of relevant studies. Report No. 1043. Conference Board, New York.
- 4. KLAUS, J., ZINK, VOSS, V. Quality in Germany - an overview in The TQM Magazine, 10(6), pp. 458 - 463.
- 5. KAUSEK, J. 2006. The management system auditor´s handbook. Milwakee, ASQ Quality press. ISBN 978-0-87389-670-2
- 6. PAULOVÁ, I. et al. 2010. Perspektívy rozvoja manažérstva kvality v súvislosti s požiadavkami trhu Slovenskej republiky (Prospects of management quality development regarding the marker demands in the Slovak Republic). Trnava: AlumniPress, ISBN 987-80-8096-129-9
- 7. PAULOVÁ, I. 2009. Vybrané metódy systémového prístupu hodnotenia účinnosti a výkonnosti manažérstva kvality a komplexného manažérstva kvality (Selected methods of systemic approach to assessing effectiveness and performance of quality anagement and TQM). Trnava: AlumniPress, 97 p. ISBN 978-80-8096-086-5
- 8. PAULOVÁ, I. 2006. Skúsenosti pri vykonávaní auditov vo vybraných organizáciách SR. (Experience in audit application in chosen organizations of SR). In: Kvalita a spoľahlivosť technických systémov. (Quality and reliability of technical systems): Conf. Proc. 11. Nitra: SPU in Nitra, pp. 63-66. ISBN 80-8069-707-8
- 9. SANIUK, A., WITKOWSKI, K., SANIUK, S. 2013. Management of production orders in metalworking production. In: 22nd International Conference on Metallurgy and Materials - METAL 2013. CD-ROM. Brno: TANGER. ISBN: 978-80-87294-39-0
- 10. SHORTRI, A. P., DANDEKAR, A. R. 2012. "PPAP" an effective tool for vendor quality management. In: International Journal of Emerging Technology and Advanced Engineering, 2(4), pp. 369-372. ISSN 2250-2459
- 11. ŠURINOVÁ, Y., PAULOVÁ, I. 2010. Globalization effects on customer specific requirements in automotive production. Vedecké práce MtF STU. (Research papers, Faculty of Materials Science and Technology, Slovak University of Technology in Trnava), 18(28), pp. 101-106. ISSN 1336-1589
- 12. WOODHOUSE, D. 2003. Quality Improvement through Quality Audit in Quality in Higher Education, 9(2). ISSN 1353-8322
- 13. SEUNGWOOK, P., JANET L. HARTLEY, WILSON, D. 2001. Quality management practices and their relationship to buyer’s supplier ratings: a study in the Korean automotive industry. Journal of Operations Management, 19(6), pp. 695-712.
- 14. ŠTETINOVÁ, A., HULÍN, P. 2011. What is VDA 6.1? In: Logistický monitor. ISSN 1336-5851.
- 15. ISO Survey 2011 online http://www.iso.org/iso/home/standards/certification/isosurvey. htm
- 16. VDA 6 Quality audits - basics. 4nd edition 2006.
- 17. VDA 6.1 - Quality system audit, 4th revised edition 2003, up-dated reprint 2010.
- 18. VDA 6.2 - Quality System Audit - Services. Volume 6, Part 2, 2nd edition 2004.
- 19. VDA 6.3 Process audit. Volume 6, Part 3, 2nd edition June 2010, 2nd completely revised edition.
- 20. VDA 6.7 Process audit for single production. Volume 6 Part 7, 1st edition 2005. HADZIMA B., JANEČEK M., ESTRIN Y., KIM H.S. 2007, Mater. Sci. and Eng. A462, 243-247.
DOI: https://doi.org/10.2478/rput-2013-0036 | Journal eISSN: 1338-0532
Language: English
Page range: 21 - 30
Published on: Jan 25, 2014
Published by: Slovak University of Technology in Bratislava
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Related subjects:
© 2014 Yulia Šurinová, published by Slovak University of Technology in Bratislava
This work is licensed under the Creative Commons License.