References
- Yildirim, M., Özyürek, D. (2013): The effects of Mg amount on the microstructure and mechanical properties of Al-Si-Mg alloys. Materials & Design, 51, pp. 767–774, DOI: 10.1016/j.matdes.2013.04.089.
- Kaufman, J.G., Rooy, E.L. (2004): Aluminium alloy castings: Properties, processes, and aplications. ASM International, 340 p.
- SS-EN 1676:2010. Aluminium and aluminium alloys - Alloyed ingots for remelting – Specifications [cited 20/10/2020]. Available on: https://www.stenaaluminium.com/siteassets/document/product-sheets/eng-en-ab-43400.pdf.
- Raffmetal the Aluminium Evolution. Continuous casting alloys: EN AB 43000 AlSi10Mg(Fe) alloy [cited 11/7/2020]. Available on: https://www.raffmetal.com/web_eng/prodotti.asp?q=1.
- Vončina, M., Medved, J., Mrvar, P. (2005): Thermodynamic analysis of MgSi10Mg alloy. RMZ – Materials and Geoenvironment, 52(3), pp. 621–633.
- Que, Z., Wang, Y., Fan, Z. (2018): Formation of the Fe-containing intermetallic compounds during solidification of Al5Mg2Si0.7Mn1.1 Alloy. Metallurgical and Materials Transactions A, 49, pp. 2173–2181, DOI: 10.1007/s11661-018-4591-6.
- Ravi, M., Mech, K., Sasidharan, V., et al. (2014): Influence of alloying elements and casting process on the mechanical properties of al-si piston alloy. National conference on advances in materials and advances in bioprocess engineering. At: Mohandas College of Engineering and technology.
- Girelli, L., Tocci, M., Gelfi, M., Pola, A. (2019): Study of heat treatment parameters for additively manufactured AlSi10Mg in comparison with corresponding cast alloy. Materials Science & Engineering A, 739, pp. 317–328, DOI: 10.1016/j.msea.2018.10.026.
- Zyguła, K., Nosek, B., Pasowiec, H., Szysiak, N. (2018): Mechanical properties and microstructure of AlSi10Mg alloy obtained by casting and SLM technique. World Scientific News, 104, pp. 462–472, DOI: 10.1007/s12633-021-01340-9.
- Bäckerud, L., Chai, G., Tamminen, J. (1990): Solidification characteristics of aluminium alloys. Volume 2, foundry alloys. AFS/SKANALUMINIUM: Stockholm, 266 p.
- Medved, J., Kores, S., Balaško, T., Vončina, M. (2019): Influence of minor alloying element addition on aluminium casting alloys, Livarski vestnik, 66(3), pp. 191–202.
- Vončina, M., Medved, J., Kores, S., Xie, P., Schumacher, P., Li, J. (2013): Precipitation microstructure in Al-Si-Mg-Mn alloy with Zr additions. Materials characterization, 155, 8 p., DOI: 10.1016/j.matchar.2019.109820.
- Petrič, M. (2013): Sprememba dimenzij in električne upornosti med strjevanjem litin iz sistema Al-Si. Ph. D. Thesis. University of Ljubljana, Faculty of Natural Sciences and Engineering, Department of Materials and Metallurgy: Ljubljana, 138 p.