References
- Al-Sudani, J.A. (2017): Real-time monitoring of mechanical specific energy and bit wear using control engineering systems. Journal of Petroleum Science and Engineering, 149, pp. 171–182, DOI: 10.1016/j.petrol.2016.10.038.
- Bingham, M.G. (1965): A New Approach to Interpreting Rock Drillability. Petroleum Publishing Co.: Tulsa, OK, USA, 93 p.
- Cheatham, J.B. (1958): An analytical study of rock penetration by a single bit tooth. In: Proceedings of the 8th Drilling and Blasting Symposium, Minnesota, MN, USA.
- Dagrain, F., Lamine, E., Delwiche, R., Golard, N. (2013): Characterization of the performances of small diameter drill bits for the optimization of the drilling parameters. In: Proceedings of the 2nd International Conference on Stone and Concrete Machining (ICSCM), Dortmund, Germany.
- Dutta, P.K. (1972): A theory of percussive drill bit penetration. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 9, pp. 543–567, DOI: 10.1016/0148-9062(72)90044-7.
- Eremin, E.N., Yurov, V.M., Guchenko, S.A., Laurynas, V.C., Kasymov, S.S. (2016): Antifriction Superhard Coatings for Drill Bits and Boring Cutters. Procedia Engineering, 152, pp. 608–612, DOI: 10.1016/j.proeng.2016.07.663.
- Evans, I., Murrell, S. (1962): Wedge penetration into coal. Colliery Engineering, 39, 11.
- He, W., Chen, Y., He, J., Xiong, W., Tang, T., OuYang, H. (2016): Spherical contact mechanical analysis of roller cone drill bits journal bearing. Petroleum, 2, pp. 208–214, DOI: 10.1016/j.petlm.2016.03.002.
- Jones, H.G., Norgren, S.M., Kritikos, M., Mingard, K.P., Gee, M.G. (2017): Examination of wear damage to rock-mining hardmetal drill bits. International Journal of Refractory Metals and Hard Materials, 66, pp. 1–10, DOI: 10.1016/j.ijrmhm.2017.01.013.
- Karasawa, H., Ohno, T., Miyazaki, K., Eko, A. (2016): Experimental results on the effect of Bit wear on torque response. International Journal of Rock Mechanics and Mining Sciences, 84, pp. 1–9, DOI: 10.1016/j.ijrmms.2016.01.013.
- Ma, D.K., Yang, S.L. (1985): Kinematics of the Cone Bit. Society of Petroleum Engineers Journal, 25, pp. 321–329, DOI: 10.2118/10563-PA.
- Maurer, W.C. (1965): Bit-Tooth Penetration Under Simulated Borehole Conditions. Journal of Petroleum Technology, 17, pp. 1433–1442, DOI: 10.2118/1260-PA.
- Naganawa, S. (2005): Dynamics modeling of roller cone bit axial vibration. Journal of the Japanese Association for Petroleum Technology, 70, pp. 333–346, DOI: 10.3720/japt.70.333.
- Naganawa, S. (2012): Feasibility study on rollercone bit wear detection from axial bit vibration. Journal of Petroleum Science and Engineering, 82–83, pp. 140–150, DOI: 10.1016/j.petrol.2012.01.014.
- Njobuenwu, D.O., Wobo, C.A. (2007): Effect of drilled solids on drilling rate and performance. Journal of Petroleum Science and Engineering, 55, pp. 271–276, DOI: 10.1016/j.petrol.2006.08.012.
- Olsson, M., Yvell, K., Heinrichs, J., Bengtsson, M., Jacobson, S. (2017): Surface degradation mechanisms of cemented carbide drill buttons in iron ore rock drilling. Wear, 388–389, pp. 81–92, DOI: 10.1016/j.wear.2017.03.004.
- Paul, B., Sikarskie, D.L. (1965): A preliminary model for wedge penetration in brittle materials. Transactions of the American Institute of Mining Engineers, 232, pp. 373–383.
- Warren, T.M. (1981): Drilling Model for Soft-Formation Bits. Journal of Petroleum Technology, 33, pp. 963–970, DOI: 10.2118/8438-PA.
- Warren, T.M. (1987): Penetration Rate Performance of Roller Cone Bits. Society of Petroleum Engineers, 2, pp. 9–18, DOI: 10.2118/13259-PA.
- Zhao, J., Zhang, G., Xu, Y., Wang, R., Zhou, W., Yang, D. (2018): Experimental and theoretical evaluation of solid particle erosion in an internal flow passage within a drilling bit. Journal of Petroleum Science and Engineering, 160, pp. 582–596, DOI: 10.1016/j.petrol.2017.10.068.
- Hareland, G., Wu, A., Rashidi, B.A. (2010): New Drilling Rate Model for Tricone Bit and Its Application to Predict Rock Compressive Strength. In: 44th US Rock Mechanic Symposium and 5th U.S.-Canada Rock Mechanics Symposium, Salt Lake City, UT, USA.
- Rashidi, B., Hareland, G., Wu, Z. (2015): Performance, simulation and field application modeling of rollercone bits. Journal of Petroleum Science and Engineering, 133, pp. 507–517, DOI: 10.1016/j.petrol.2015.06.003.
- Bourgoyne, A.T., Young, F.S. (1974): A Multiple Regression Approach to Optimal Drilling and Abnormal Pressure Detection. Society of Petroleum Engineers Journal, 14, pp. 371–384, DOI: 10.2118/4238-PA.
- Bourgoyne, A.T., Millheim, K.K., Chenevert, M.E., Young, F.S. (1991): Rotary Drilling Bits. In: Applied Drilling Engineering. SPE: Richardson, TX, USA, pp. 190–245.
- Totten, G.E. (2006): Steel Heat Treatment: Metallurgy and Technologies, 2nd ed. CRC Press: Boca Raton, Florida, USA, 848 p.