References
- [1] Schumann, H. (1983): Metallografie, 12. Auflage. Leibzig: WEB Deutscher Verlag für Grundstoffindustrie, 608 p.
- [2] Kveder, A. (1972): Metalurški priročnik (Handbook of Metallurgy), Ljubljana: Tehniška založba Slovenije, 1471 p.
- [3] Mardon, C. (1998): The austenitization and decarburization of high silicon spring steel. PhD Thesis, Christchurch: University of Canterbury; 103 p.
- [4] Zhang, C.L., Zhou, L.I., Liu, Y.Z. (2013): Surface decarburization characteristics and relation decarburized types and heating temperature of spring steel 60Si2MnA. International Journal of Minerals, Metallurgy, and Materials, 20(8), pp. 720–724.
- [5] Liu, Y., Zhang, W., Tong, Q., Wang, L. (2014): Effects of Temperature and Oxygen Concentration on the Characteristics of Decarburization of 55SiCr Spring Steel. ISIJ International, 54(8), pp. 1920–1926.
- [6] Zorc, M. (2016): Decarburization of non-alloy medium carbon steel during annealing in an air atmosphere (in Slovenian), Diploma Thesis, Ljubljana: University of Ljubljana, Faculty of Natural sciences and Engineering - Department of Materials and Metallurgy; 41 p.
- [7] Mayott, S.W. (2010): Analysis of the Effect of Reduced Oxygen Atmospheres on the Decarburization Depth of 300M Alloy Steel, Master of Science Thesis, New York, Rensselaer Polytechnic Institute, Department of Materials Science and Engineering.
- [8] Naumann, F.K. (1976): Das Buch der Schadensfälle. Stuttgart, Germany: Dr. Riederer-Verlag GmbH, 481 p.
- [9] Vander Voort, G.F. (2015): Understanding and Measuring Decarburization. Advanced materials & Processes, 173(2), pp. 22–27.
- [10] Jaason, K., Peetsalu, P., Saarna, M., Kulu, P., Beilmann, J. (2016): Decarburization Effect on Hardened Strip Fastening Components. Materials Science, 22(1), pp.148–152.
- [11] Vodopivec, F. (2002). Kovine in zlitine (Metals and Alloys), Ljubljana: Institute of Metals and Technology, 474 p.
- [12] Zorc, B., Nagode, A., Kosec, B., Kosec, L. (2013): Elevator chain wheel shaft break analysis. Case Studies in Engineering Failure Analysis, 1(2), pp. 115–119.
- [13] Atlas zur Wärmebehandlung der Stähle auf CD-ROM (2009); Düsseldorf: Verlag Stahleisen GmbH.
- [14] Chen, R.Y., Yuen, W.Y.D. (2003): Review of the High-Temperature Oxidation of Iron and Carbon Steels in Air or Oxygen. Oxidation of Metals, 59(5/6), pp. 433–468.
- [15] De Cooman, B.C., Speer, J.G. (2011): Fundamentals of Steel Product Physical Metallurgy, Englewood: AIST, 642 p.
- [16] Grzesik, Z. (2003): Thermodynamics of Gaseous Corrosion. In ASM Handbook, Vol. 13A - Corrosion: Fundamentals, Testing, and Protection, Cramer, S.D., Covino Jr., B.S. (Eds.), Ohio: ASM International, Materials Park, pp. 90–96.
- [17] Billings, G.A. (1966): Oxidation and Decarburization Kinetics of Iron-Carbon Alloys in Carbon Dioxide-Carbon Monoxide Atmosphere, Master of Science Thesis, Hamilton, Ontario: McMaster University; 120 p.
- [18] Baud, J., Ferrier, A., Manenc, J., Bénard, J. (1975): The oxidation and decarburizing of Fe-C alloys in air and the influence of relative humidity. Oxidation of Metals, 9(1), pp. 69–97.
- [19] Sebenji, F., Hakl, L., (1980). Corrosion of metals in theory and practice (in Serbian), Belgrade: Tehnička knjiga, 226 p.
- [20] Stratton, P.F. (1984): Living with Furnace Atmosphere Contamination. Metal Science and Heat Treatment, 2, pp. 41–48.
- [21] Parrish, G. (1999): Carburizing-Microstructures and properties. Ohio: ASM International: Materials Park, 247 p.
- [22] Mladenović, S., Petrović, M., Rikovski, G. (1975). Handbook of chemical technology, Corrosion and protection of materials (in Serbian), Belgrade: IRO “RAD”, 484 p.