References
- A. A. Yousefi, H. F. Haghshenas, B. Shane, J. Harvey, and P. Blankenship, “Performance of warm asphalt mixtures containing reclaimed asphalt pavement, an anti-stripping agent, and recycling agents : A study using a balanced mix design approach,” Constr. Build. Mater., vol. 363, no. October 2022, p. 129633, 2023, doi: 10.1016/j.conbuildmat.2022.129633.
- A. Mohammed Babalghaith, S. Koting, N. H. Ramli Sulong, M. R. Karim, and B. Mohammed AlMashjary, “Performance evaluation of stone mastic asphalt (SMA) mixtures with palm oil clinker (POC) as fine aggregate replacement,” Constr. Build. Mater., vol. 262, p. 120546, 2020, doi: 10.1016/j.conbuildmat.2020.120546.
- M. Nouali, Z. Derriche, E. Ghorbel, and L. Chuanqiang, “Plastic bag waste modified bitumen a possible solution to the Algerian road pavements,” Road Mater. Pavement Des., vol. 21, no. 6, pp. 1713–1725, 2020, doi: 10.1080/14680629.2018.1560355.
- G. Shafabakhsh, O. J. Ani, and S. M. Mirabdolazimi, “Rehabilitation of Asphalt Pavement to Improvement the Mechanical and Environmental Properties of Asphalt Concrete by Using of Nano Particles,” vol. 2, pp. 1–20, 2021, doi: 10.22075/JRCE.2019.17407.1326.
- J. Adaluz, E. Victoria, H. Alexander, F. A. Reyes-lizcano, and J. Gabriel, “Mechanical Behavior of Low-Density Polyethylene Waste Modified Hot Mix Asphalt,” 2022.
- R. Journal and O. F. T. Infrastructure, “CONSIDERATIONS ON THE BENEFITS OF USING imposed by traditional rehabilitation methods . The European Asphalt Pavement Association ( EAPA ) provides world- wide statistical data on how recycled asphalt is used :,” vol. 6, no. 4, pp. 43–53, 2017, doi: 10.1515/rjti-2017-0053.
- “100+ Plastic in the Ocean Statistics & Facts (2020-2021).” https://www.condorferries.co.uk/plastic-in-the-ocean-statistics (accessed Jul. 27, 2022).
- A. Almeida, S. Capitão, C. Estanqueiro, and L. Picado-santosc, “Possibility of incorporating waste plastic film flakes into warm-mix asphalt as a bitumen extender,” Constr. Build. Mater., vol. 291, p. 123384, 2021, doi: 10.1016/j.conbuildmat.2021.123384.
- H. R. Radeef, N. A. Hassan, A. Razin, and Z. Abidin, “Enhanced Dry Process Method for Modi fi ed Asphalt Containing Plastic Waste,” vol. 8, no. July, pp. 1–14, 2021, doi: 10.3389/fmats.2021.700231.
- M. Fonseca, S. Capit, and A. Almeida, “applied sciences Influence of Plastic Waste on the Workability and Mechanical Behaviour of Asphalt Concrete,” 2022.
- H. Radhi et al., “Case Studies in Construction Materials The mechanical response of dry-process polymer wastes modified asphalt under ageing and moisture damage,” Case Stud. Constr. Mater., vol. 16, no. January, p. e00913, 2022, doi: 10.1016/j.cscm.2022.e00913.
- S. Ullah, M. Raheel, R. Khan, and M. Tariq, “Characterization of physical & mechanical properties of asphalt concrete containing low- & high-density polyethylene waste as aggregates,” Constr. Build. Mater., vol. 301, no. May, p. 124127, 2021, doi: 10.1016/j.conbuildmat.2021.124127.
- S. Haider, I. Hafeez, and R. Ullah, “Sustainable use of waste plastic modifiers to strengthen the adhesion properties of asphalt mixtures,” Constr. Build. Mater., vol. 235, p. 117496, 2020, doi: 10.1016/j.conbuildmat.2019.117496.
- A. Epps, J. T. Harvey, Y. R. Kim, and R. Roque, “Structural requirements of bituminous paving mixtures,” Transp. New Millenn., pp. 2–3, 2000.
- S. Mirzapour Mounes, M. R. Karim, A. Khodaii, and M. H. Almasi, “Evaluation of permanent deformation of geogrid reinforced asphalt concrete using dynamic creep test,” Geotext. Geomembranes, vol. 44, no. 1, pp. 109–116, 2016, doi: 10.1016/j.geotexmem.2015.06.003.
- M. Merbouh, “Effect of thermal cycling on the creep-recovery behaviour of road bitumen,” Energy Procedia, vol. 18, no. December 2012, pp. 1106–1114, 2012, doi: 10.1016/j.egypro.2012.05.125.
- J. R. M. (JKR), Standard Specification for RoadWork. In Section 4: Flexible Pavement;Malaysian Public Works Department: Kuala Lumpur, vol. 7, no. 1. 2008, pp. 37–72. [Online]. Available: https://www.researchgate.net/publication/269107473_What_is_governance/link/548173090cf22525dcb61443/download%0A http://www.econ.upf.edu/~reynal/Civilwars_12December2010.pdf%0A https://think-asia.org/handle/11540/8282%0A https://www.jstor.org/stable/41857625
- M. Ranieri, L. Costa, J. R. M. Oliveira, H. M. R. D. Silva, and C. Celauro, “Asphalt Surface Mixtures with Improved Performance Using Waste Polymers via Dry and Wet Processes,” J. Mater. Civ. Eng., vol. 29, no. 10, 2017, doi: 10.1061/(asce)mt.1943-5533.0002022.
- C. R. Monismith, C. L., Ogawa, N., & Freeme, “Permanent deformation characterization of subgrade soils due to repeated loading,” Transp. Res. Rec., 1975.
- EN 12697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test. 2005.
- “Australian Standard, Method 12.1: Determination of the permanent compressive strain characteristics of asphalt-dynamic creep test., AS 2891.12. 1: Methods of sampling and testing asphalt Standards Australia, Australia, Sydney, 1995”.
- “British Standards Institute, Sampling and examination of bituminous mixtures for roads and other paved areas- Part 110: Methods of test for the determination of wheel-tracking rate and depth, BS 598-110, British Standards Institute, 1998”.
- “Mix Design Methods For Asphalt Concrete And Other Hot Mix Types, The Asphalt Institute, MS-2, Sixth Edition, 1993”.
- W. M. N. W. A. Rahman and A. F. A. Wahab, “Green pavement using recycled Polyethylene Terephthalate (PET) as partial fine aggregate replacement in modified asphalt,” in Procedia Engineering, 2013, vol. 53. doi: 10.1016/j.proeng.2013.02.018.
- D. A. Álvarez, A. A. Aenlle, A. J. Tenza-Abril, and S. Ivorra, “Influence of partial coarse fraction substitution of natural aggregate by recycled concrete aggregate in hot asphalt mixtures,” Sustain., vol. 12, no. 1, 2020, doi: 10.3390/SU12010250.
- H. Akbulut and C. Gürer, “Use of aggregates produced from marble quarry waste in asphalt pavements,” Build. Environ., vol. 42, no. 5, 2007, doi: 10.1016/j.buildenv.2006.03.012.
- I. M. Asi, “Laboratory comparison study for the use of stone matrix asphalt in hot weather climates,” Constr. Build. Mater., vol. 20, no. 10, 2006, doi: 10.1016/j.conbuildmat.2005.06.011.
- M. Panda, A. Suchismita, and J. Giri, “Utilization of Ripe Coconut Fiber in Stone Matrix Asphalt Mixes,” Int. J. Transp. Sci. Technol., vol. 2, no. 4, 2013, doi: 10.1260/2046-0430.2.4.289.
- E. Ahmadinia, M. Zargar, M. R. Karim, M. Abdelaziz, and P. Shafigh, “Using waste plastic bottles as additive for stone mastic asphalt,” Mater. Des., vol. 32, no. 10, 2011, doi: 10.1016/j.matdes.2011.06.016.
- Y. Menaria and R. Sankhla, “Use of Waste Plastic in Flexible Pavements-Green Roads,” Open J. Civ. Eng., vol. 05, no. 03, 2015, doi: 10.4236/ojce.2015.53030.
- J. M. Krishnan and K. R. Rajagopal, “On the mechanical behavior of asphalt,” Mech. Mater., vol. 37, no. 11, pp. 1085–1100, 2005, doi: 10.1016/j.mechmat.2004.09.005.
- H. Z. Farahani, M. Palassi, and S. Sadeghpour Galooyak, “Thermal analysis of bitumen modified with LDPE and CR,” Pet. Sci. Technol., vol. 35, no. 15, 2017, doi: 10.1080/10916466.2017.1319385.
- C. Fang et al., “Pavement properties of asphalt modified with packaging-waste polyethylene,” J. Vinyl Addit. Technol., vol. 20, no. 1, pp. 31–35, 2014, doi: 10.1002/vnl.21328.