Influence of the Parallel Beam Load Cell installation on the Strain/Stress Field reading error

Stefan, Mocanu; Radu, Panaitescu-Liess; Oana, Tonciu; Catalin, Francu

doi:10.2478/rjti-2022-0005

References

[1]. Q. LIANG, D. ZHANG, G. COPPOLA, Y. WANG, S. WEI, Y. GE: “Multidimensional MEMS/micro sensor for force and moment sensing: a review”, IEEE Sensor J, 14 (2014), pp. 2643-2657.
Search in Google Scholar Back to article
[2]. OMAR SABAH AL-DAHIREE 1, MOHAMMAD OSMAN TOKHI, NABIL HASSAN HADI 4, NASSAR RASHEID HMOAD, RAJA ARIFFIN RAJA GHAZILLA, HWA JEN YAP, EMAD ABDULLAH ALBAADANI: “Design and Shape Optimization of Strain Gauge Load Cell for Axial Force Measurement for Test Benches”, Sensors 2022, 22, 7508 https://doi.org/10.3390/s22197508.
Search in Google Scholar Back to article
[3]. CAPOBIANCO, G.; BOHUN, N.; GRATTON, M.; SERRA, R.; ZINBI, A.; RIGOLLET, N.: “Both radial and axial load distribution measurement on a V-band clamp by a new load cell design”, Insight-Non-Destr. Test. Cond. Monit. 2022, 64, 432–436.
Search in Google Scholar Back to article
[4]. R. NAKKA.: “Strain Gage Load Cell for Thrust Measurement”, available online: http://www.nakka-rocketry.net/strainlc.html (accessed on 9 May 2022).
Search in Google Scholar Back to article
[5]. V. FLORESCU, L. RECE, S. MOCANU A. LEGENDI: “Comparative study on the applicability of analytical and experimental methods in the analysis of the safe use of rail tankers carrying petroleum products under pressure”, Romanian journal of transport infrastructure, Volume 7, Issue 1, Page 107-116, DOI 10.2478/rjti-2018-0007, 2018.
Search in Google Scholar Back to article
[6]. J.G. FERREIRA, F. BRANCO: “Measurement of Vertical Deformations in Bridges Using an Innovative Elastic Cell System”, Exp. Technol. 2015, 39, 13–20.
Search in Google Scholar Back to article
[7]. A.R. TAVAKOLPOUR-SALEH, M.R. SADEGHZADEH: “Design and development of a three-component force/moment sensor for underwater hydrodynamic tests”, Sens. Actuators A Phys. 2014, 216, 84–91.
Search in Google Scholar Back to article
[8]. A. TAKEZAWA, S. NISHIWAKI, M. KITAMURA, E.C.N. SILVA: “Topology optimization for designing strain-gauge load cells”, Struct. Multidiscip. Optim. 2010, 42, 387–402.
Search in Google Scholar Back to article
[9]. A. TORRENTS, K. AZGIN, S.W. GODFREY, E.S. TOPALLI, T. AKIN, L. VALDEVIT: “MEMS resonant load cells for micro-mechanical test frames: Feasibility study and optimal design”, J. Micromechanics Microeng. 2010, 20.
Search in Google Scholar Back to article
[10]. J.O.TEMPLEMAN, B.B. SHEIL, T. SUN: “Multi-axis force sensors: A state-of-theart review”, Sens. Actuators A Phys. 2020, 304.
Search in Google Scholar Back to article
[11]. V. FLORESCU, S. MOCANU, L. RECE, R. URSACHE N. GOGA, C.V. MARIAN: “Use of a Novel Resistive Strain Sensor Approach in an Experimental and Theoretical Study Concerning Large Spherical Storage Tank Structure Behavior During Its Operational Life and Pressure Tests”, SENSORS, Volume 20, Issue 2, Article Number 525, 2020.
Search in Google Scholar Back to article
[12]. M. ZHANG, B. QIU, M. ZHU: “Novel computation method of reducing illposedness for structural static distributed load identification by optimising strain gauge locations”, Mech. Syst. Signal Process. 2019, 124, 83–110.
Search in Google Scholar Back to article
[13]. R. KOLHAPURE, V. SHINDE, V. KAMBLE: “Geometrical optimization of strain gauge force transducer using GRA method”, Measurement 2017, 101, 111–117.
Search in Google Scholar Back to article
[14]. H. SUN, X. ZHANG, J. CHEN: “Optimum Design of the Spoke Type Load Cell Based on Fatigue Performance”, J. Fail. Anal. Prev. 2017, 17, 717–723.
Search in Google Scholar Back to article
[15]. S. MOCANU, L. RECE, A. BURLACU, C. RONȚESCU, A. MODREA: “Novel Procedures for Sustainable Design in Structural Rehabilitation on Oversized Metal Structures”, METALS, Volume12, Issue7, Article Number1107 2023.
Search in Google Scholar Back to article
[16]. R. SEETHALER, S. Z. MANSOUR, M. G. RUPPERT, A. J. FLEMING: “Piezoelectric benders with strain sensing electrodes: Sensor design for position control and force estimation”, Sens. Actuators A Phys. 2022, 335.
Search in Google Scholar Back to article
[17]. V. FLORESCU, S. MOCANU, L. RECE, L, D. MOTOUNU, A. GHERGHINA, A. BURLACU: “Design Contributions to the Elaboration of New Modeling Schemes for the Buckling Assessment of Hydraulic Actuators”, METALS, Volume10, Issue9, Article Number1143. 2022.
Search in Google Scholar Back to article
[18]. S. NUTHALAPATI, V. SHIRHATTI, V. KEDAMBAIMOOLE, N. V. PANDI, H. TAKAO, M. M. NAYAK, K. RAJANNA: “Highly sensitive flexible strain and temperature sensors using solution processed graphene palladium nanocomposite”, Sens. Actuators A Phys. 2022, 334.
Search in Google Scholar Back to article
[19]. T. N. PROJOTH, D. P. M. VICTOR, P. NANTHAKUMAR: “Analysis and prediction of cutting force through lathe tool dynamometer in CNC turning process”, Mater. Today Proc. 2021, 46, 4174–4179.
Search in Google Scholar Back to article
[20]. V. FLORESCU, S. MOCANU, A. NEAGU, C. SESCU-GAL: “Research on the parameters influencing the numerical analysis of the fatigue behaviour of a forklift-arm”, Romanian journal of transport infrastructure, Volume10, Issue1, Page1-10, DOI10.2478/rjti-2021-0001, JUL 2021.
Search in Google Scholar Back to article
[21]. Z. LOVRENOVIC, M. DOUMIT: “Development and testing of a passive Walking Assist Exoskeleton”, Biocybern. Biomed. Eng. 2019, 39, 992–1004.
Search in Google Scholar Back to article
[22]. D. T. BYRNE, H. ESMONDE, D. P. BERRY, F. MCGOVERN, P. CREIGHTON, N. MCHUGH,: “Sheep lameness detection from individual hoof load”, Comput. Electron. Agric. 2019, 158, 241–248.
Search in Google Scholar Back to article
[23]. T. GUO, Z. CHEN, S. LU, R. YAO: “Monitoring and analysis of long-term prestress losses in post-tensioned concrete beams”, Measurement 2018, 122, 573–581.
Search in Google Scholar Back to article
[24]. A. R. TAVAKOLPOUR-SALEH, A. R. SETOODEH, M. GHOLAMZADEH: “A novel multi-component strain-gauge external balance for wind tunnel tests: Simulation and experiment”, Sens. Actuators A Phys. 2016, 247, 172–186.
Search in Google Scholar Back to article
[25]. J. HOŠEK, O. FRANK, V. DIEZ: “Mini-tensile load cell design for diffractometry study of 2d nanostructures”, Rom. Rev. Precis. Mech. Opt. Mechatron. 2014, 45, 89–93. Available online: https://www.proquest.com/scholarly-journals/mini-tensile-load-cell-design-diffractometry/docview/1640469803/se-2.
Search in Google Scholar Back to article
[26]. * * * https://www.robofun.ro/senzori/forta/celula-de-sarcina-10kg-bara-dreapta.
Search in Google Scholar Back to article
[27]. St. MOCANU: “Scurt comentariu asupra interpretării principiului lui Barre de Saint-Venant în contextul modelării schemei de rezemare prin metoda elementului finit”, Sinteze de Mecanică Teoretică și Aplicată, Volumul 7 (2016), Nr. 1.
Search in Google Scholar Back to article
[28]. N. SEIDLE.: “Calibration sketch for HX711 breakout board”, SparkFun Electronics, November 19th, 2014 (public domain).
Search in Google Scholar Back to article
[29]. N. SEIDLE: “Basic scale output sketch for HX711 breakout board”, SparkFun Electronics, November 19th, 2014 (public domain).
Search in Google Scholar Back to article
[30]. * * * https://github.com/bogde/HX711 (GNU GENERAL PUBLIC LICENSE library).
Search in Google Scholar Back to article
[31]. www.cadworks.ro/.
Search in Google Scholar Back to article
[32]. www.3dcadvegra.ro/.
Search in Google Scholar Back to article
[33]. http://insertmedia.office.microsoft.com.
Search in Google Scholar Back to article

Influence of the Parallel Beam Load Cell installation on the Strain/Stress Field reading error

References

Paradigm

My account