Prosthetic restoration in frontal maxillary area using digital technologies: Case presentation (Part II)

Mihai David; Elena Georgiana Radu; Madalina Adriana Malita; Viorel Stefan Perieanu; Maria Antonia Stetiu; Florentina Caministeanu; Ruxandra Stanescu; Mircea Popescu; Mihai Burlibasa; Mihaela Chirila

doi:10.2478/rjr-2025-0014

.blurhash-client-img { display: none !important; }

Prosthetic restoration in frontal maxillary area using digital technologies: Case presentation (Part II)

Romanian Journal of Rhinology

Volume 15 (2025): Issue 58 (June 2025)

By: Mihai David, Elena Georgiana Radu, Madalina Adriana Malita , Viorel Stefan Perieanu , Maria Antonia Stetiu, Florentina Caministeanu, Ruxandra Stanescu, Mircea Popescu, Mihai Burlibasa and Mihaela Chirila

Open Access

|May 2025

Abstract

Digital technologies represent new alternatives in prosthetic rehabilitation of all kind of maxillary or mandibular spans. This article is composed of two parts, in which different technological aspects will be presented regarding the prosthetic restoration of frontal maxillary areas using the CAD-CAM technology, but using different material for resistance framework, both veneered with ceramic materials to restore the aesthetics. The main material that will be used are: Co-Cr dental alloy and zirconium dioxide (zirconia).

References

Cristache CM, Totu EE. CAD-CAM – O tehnologie a mileniului trei in stomatologie. Ed. Didactica si Pedagogica, Bucuresti; 2016.
Search in Google Scholar Back to article
Bratu D, Nussbaum R. Bazele clinice si tehnice ale protezarii fixe. Ed. Medicala, Bucuresti; 2006.
Search in Google Scholar Back to article
Gligor MR, Malita MA, Perieanu VS, Costea RC, Beuran IA, Burlibasa M. Aspecte teoretice si practice in tehnologia protezelor unidentare – Parte I. In: Gligor MR, Malita MA, Perieanu VS, Costea RC, Beuran IA, Burlibasa M. Tendinte moderne in stiintele biomedicale. Ed. Matrix Rom, Bucuresti; 2021, pp. 9-153.
Search in Google Scholar Back to article
Gligor MR, Malita MA, Perieanu VS, Costea RC, Beuran IA, Burlibasa M. Aspecte teoretice si practice in tehnologia protezelor unidentare – Parte II. In: Gligor MR, Malita MA, Perieanu VS, Costea RC, Beuran IA, Burlibasa M. Tendinte moderne in stiintele biomedicale. Ed. Matrix Rom, Bucuresti; 2021, pp. 154-336.
Search in Google Scholar Back to article
Joda T, Zarone F, Ferrari M. The complete digital workflow in fixed prosthodontics: a systematic review. BMC Oral Health. 2017;17(1):124. DOI: 10.1186/s12903-017-0415-0.
Search in Google Scholar Back to article
Stanley M, Paz AG, Miguel I, Coachman C. Fully digital workflow, integrating dental scan, smile design and CAD-CAM: case report. BMC Oral Health. 2018;18(1):134. DOI: 10.1186/s12903-018-0597-0.
Search in Google Scholar Back to article
Joda T, Bragger U. Digital vs. conventional implant prosthetic workflows: a cost/time analysis. Clin Oral Implants Res. 2015;26(12):1430-5. DOI: 10.1111/clr.12476.
Search in Google Scholar Back to article
Bessadet M, Drancourt N, El Osta N. Time efficiency and cost analysis between digital and conventional workflows for the fabrication of fixed dental prostheses: A systematic review. J Prosthet Dent. 2025:133(1):71-84. DOI: 10.1016/j.prosdent.2024.01.003.
Search in Google Scholar Back to article
Pan S, Guo D, Zhou Y, Jung RE, Hammerle CHF, Muhlemann S. Time efficiency and quality of outcomes in a model-free digital workflow using digital impression immediately after implant placement: A double-blind self-controlled clinical trial. Clin Oral Implants Res. 2019;30(7):617-26. DOI: 10.1111/clr.13447.
Search in Google Scholar Back to article
Tallarico M. Computerization and digital workflow in medicine: focus on digital dentistry. Materials (Basel). 2020;13(9):2172. DOI: 10.3390/ ma13092172.
Search in Google Scholar Back to article
Pieper CM, Waldemarin RF, Camacho GB. Masking ability of opaque thickness on layered metal-ceramic. Acta Odontol Latinoam. 2016;29(2):162-7.
Search in Google Scholar Back to article
Daou EE. Effect of ceramic layering on the fit of cobalt-chromium alloy 3-unit fixed dental prostheses fabricated by additive, soft milling, and casting technologies. J Prosthet Dent. 2021;126(1):130.e1-130.e7. DOI: 10.1016/j.prosdent.2021.03.033.
Search in Google Scholar Back to article
Watanabe H, Fellows C, An H. Digital technologies for restorative dentistry. Dent Clin North Am. 2022;66(4):567-90. DOI: 10.1016/j. cden.2022.05.006.
Search in Google Scholar Back to article
Takaichi A, Fueki K, Murakami N, Ueno T, Inamochi Y, Wada J, et al. A systematic review of digital removable partial dentures. Part II: CAD/ CAM framework, artificial teeth, and denture base. J Prosthodont Res. 2022;66(1):53-67. DOI: 10.2186/jpr.JPR_D_20_00117.
Search in Google Scholar Back to article
Silva LH, Lima E, Miranda RBP, Favero SS, Lohbauer U, Cesar PF. Dental ceramics: a review of new materials and processing methods. Braz Oral Res. 2017;31(suppl 1):e58. DOI: 10.1590/1807-3107BOR-2017. vol31.0058.
Search in Google Scholar Back to article
Demirci F, Bahce E, Baran MC. Mechanical analysis of three-unit metal-free fixed dental prostheses produced in different materials with CAD/ CAM technology. Clin Oral Investig.;26(9):5969-78. DOI: 10.1007/ s00784-022-04623-6.
Search in Google Scholar Back to article

Articles in this issue

DOI: https://doi.org/10.2478/rjr-2025-0014 | Journal eISSN: 2393-3356 | Journal ISSN: 2069-6523

Journal RSS Feed

Language: English

Page range: 86 - 92

Submitted on: Mar 29, 2025

Accepted on: Apr 10, 2025

Published on: May 26, 2025

Published by: Romanian Rhinologic Society

In partnership with: Paradigm Publishing Services

Publication frequency: 4 issues per year

Keywords:

Related subjects:

Clinical medicine, other,

Surgery,

Surgery, other,

Otorhinolaryngology,

Speech, voice and paediatric hearing disorders,

Oromaxillofacial surgery

© 2025 Mihai David, Elena Georgiana Radu, Madalina Adriana Malita, Viorel Stefan Perieanu, Maria Antonia Stetiu, Florentina Caministeanu, Ruxandra Stanescu, Mircea Popescu, Mihai Burlibasa, Mihaela Chirila, published by Romanian Rhinologic Society
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 License.

Volume 15 (2025): Issue 58 (June 2025)