Prosthetic restoration in frontal maxillary area using digital technologies: Case presentation (Part I)

David, Mihai; Radu, Elena Georgiana; Perieanu, Viorel Stefan; Burlibasa, Andrei; Stetiu, Maria Antonia; Caministeanu, Florentina; Popescu, Mircea; Burlibasa, Mihai; Chirila, Mihaela

doi:10.2478/rjr-2024-0028

Abstract

Digital technologies represent new alternatives in prosthetic rehabilitation of all kinds of maxillary or mandibular spans. This article is composed of two parts, in which different technological aspects will be presented regarding the prosthetic restoration of frontal maxillary areas using the CAD-CAM technology, but using different material for resistance framework, both veneered with ceramic materials to restore the aesthetics. The main materials that will be used are: Co-Cr dental alloy and zirconium dioxide (zirconia).

References

Cristache CM, Totu EE. CAD-CAM – O tehnologie a mileniului trei in stomatologie. Ed. Didactica si Pedagogica, Bucuresti; 2016.
Search in Google Scholar Back to article
Bratu D, Nussbaum R. Bazele clinice si tehnice ale protezarii fixe. Ed. Medicala, Bucuresti; 2006.
Search in Google Scholar Back to article
Gligor MR, Malita MA, Perieanu VS, Costea RC, Beuran IA, Burlibasa M. Aspecte teoretice si practice in tehnologia protezelor unidentare – Parte I. In: Gligor MR, Malita MA, Perieanu VS, Costea RC, Beuran IA, Burlibasa M, coordonatori. Tendinte moderne in stiintele biomedicale. Ed. Matrix Rom, Bucuresti; 2021, p. 9-153.
Search in Google Scholar Back to article
Gligor MR, Malita MA, Perieanu VS, Costea RC, Beuran IA, Burlibasa M. Aspecte teoretice si practice in tehnologia protezelor unidentare – Parte II. In: Gligor MR, Malita MA, Perieanu VS, Costea RC, Beuran IA, Burlibasa M. coordonatori. Tendinte moderne in stiintele biomedicale. Ed. Matrix Rom, Bucuresti; 2021, p. 154-336.
Search in Google Scholar Back to article
O’Boyle KH, Norling BK, Cagna DR, Phoenix RD. An investigation of new metal framework design for metal ceramic restorations. J Prosthet Dent. 1997;78(3):295-301. DOI: 10.1016/s0022-3913(97)70029-5.
Search in Google Scholar Back to article
Tian M, Ma S, Niu L, Chen J. Gingival pigmentation by Ni-Cr-based metal ceramic crowns: A clinical report. J Prosthet Dent. 2016;115(1):1-4. DOI: 10.1016/j.pros-dent.2015.08.015.
Search in Google Scholar Back to article
Ristic L, Ilic S, Zivanovic A. Influence of metal-ceramic fixed dental restorations on the occurrence of discoloration of gingiva. Vojnosanit Pregl. 2006;63(4):409-13. DOI: 10.2298/vsp0604409r.
Search in Google Scholar Back to article
Cehreli MC, Kakat AM, Akca K. CAD/CAM Zirconia vs. slip-cast glass-infiltrated Alumina/Zirconia all-ceramic crowns: 2-year results of a randomized controlled clinical trial. J Appl Oral Sci. 2009;17(1):49-55. DOI: 10.1590/s1678-77572009000100010.
Search in Google Scholar Back to article
Manziuc MM, Gasparik C, Burde AV, Ruiz-Lopez J, Buduru S, Dudea D. Influence of manufacturing technique on the color of zirconia restorations: Monolithic versus layered crowns. J Esthet Restor Dent. 2022;34(6):978-87. DOI: 10.1111/jerd.12897.
Search in Google Scholar Back to article
Sonza QN, Bona AD, Pecho OE, Borba M. Effect of substrate and cement on the final color of zirconia-based all-ceramic crowns. J Esthet Restor Dent. 2021;33(6):891-8. DOI: 10.1111/jerd.12632.
Search in Google Scholar Back to article
Tabatabaian F. Color in zirconia-based restorations and related factors: A literature review. J Prosthodont. 2018;27(2):201-11. DOI: 10.1111/jopr.12740.
Search in Google Scholar Back to article
Miyazaki T, Nakamura T, Matsumura H, Ban S, Kobayashi T. Current status of zirconia restoration. J Prosthodont Res. 2013;57(4):236-61. DOI: 10.1016/j.jpor.2013.09.001.
Search in Google Scholar Back to article
Beuer F, Aggstaller H, Edelhoff D, Gernet W, Sorensen J. Marginal and internal fits of fixed dental prostheses zirconia retainers. Dent Mater. 2009;25(1):94-102. DOI: 10.1016/j.dental.2008.04.018.
Search in Google Scholar Back to article
Muhlemann S, Benic GI, Fehmer V, Hammerle CHF, Sailer I. Randomized controlled clinical trial of digital and conventional workflows for the fabrication of zirconia-ceramic posterior fixed partial dentures. Part II: Time efficiency of CAD-CAM versus conventional laboratory procedures. J Prosthet Dent. 2019;121(2):252-7. DOI: 10.1016/j.pros-dent.2018.04.020.
Search in Google Scholar Back to article

Prosthetic restoration in frontal maxillary area using digital technologies: Case presentation (Part I)

Abstract

Paradigm

My account