Determination of Rectification Corrections for Semi Gantry Crane Rail Axes in the Local 3D Coordinate System
By: Daria Filipiak and Waldemar Kamiński
References
- Baran L. W., (1999), Theoretical basis for analysis of geodetic survey results, Polish Scientific Publishers PWN SA, Warsaw.
- Gocał J., (2010), Engineering and industrial geodesy. Part III, AGH University of Science and Technology Press, Cracow.
- Grala M., & Kopiejewski G., (2003), Engineering Geodesy. Selected Branches, UWM Press, Olsztyn.
- Kamiński W., (2013), New method for determination of adjustment corrections for crane rail axes, Reports on Geodesy vol. 94/2013, 47-55, doi: 10.2478/rgg-2013- 0006
- Křemen T., Koska B., Pospíšil J., Kyrinovič P., Haličková J., & Kopáčik A., (2008), Checking of crane rails by terrestrial laser scanning technology, 13FIG, 4IAG, Lnec, Lisbon 12-15 May
- Kyrinovič P., & Kopáčik A., (2010), Automated measurement system for crane rail geometry determination, 27 th International Symposium on Automation and Robotics in Construction (ISARC 2010), 294 - 305
- Marjetič A., Kregar K., Ambrožič T., & Kogoj D., (2012), An Alternative Approach to Control Measurements of Crane Rails, Sensors, 12, 5906-5918
- Wiśniewski Z., (2005), Adjustment calculus in geodesy (with examples), UWM Press, Olsztyn.
DOI: https://doi.org/10.2478/rgg-2014-0012 | Journal eISSN: 2391-8152 (formerly 0867-3179) | Journal ISSN: 0867-3179
Language: English
Page range: 71 - 79
Published on: Feb 3, 2015
Published by: Warsaw University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 2 issues per year
Related subjects:
© 2015 Daria Filipiak, Waldemar Kamiński, published by Warsaw University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.