Airborne Measurement System During Validation of Egnos/Gnss Essential Parameters in Landing
By:
References
- [1] EASA - AMC 20-26 : Airworthiness Approval and Operational Criteria for RNP AR Operations;
- [2] EASA - AMC 20-27: Airworthiness Approval and Operational Criteria for RNP APPROACH (RNP APCH) Operations Including APV BARO VNAV Operations;
- [3] EASA - Helicopters Deploy GNSS in Europe (HEDGE) project documentation,
- [4] EGNOS Introduction in European Eastern Region MIELEC project documentation,
- [5] FAA - AC 20-129: Airworthiness Approval for Vertical Navigation (VNAV) Systems for Use in the U.S. National Airspace System (NAS) and Alaska;
- [6] FAA - AC 20-105: Approval Guidance for RNP Operations and Barometric Vertical Navigation in the U.S. National Airspace System;
- [7] FAA: TSO C145A: Airborne Navigation Sensors Using the Global Positioning System (GPS) Augmented by the Wide Area Augmentation System (WAAS);
- [8] FAA - TSO C146A: Stand-Alone Airborne Navigation Equipment Using the Global Positioning System Augmented by the Wide Area Augmentation System (WAAS);
- [9] ICAO Annex 10, [10] ICAO Doc 8168 - PANS-OPS, [11] ICAO Doc 9613 - PBN Manual, [12] ICAO Doc 9905 - RNP AR Procedure Design Manual
Language: English
Page range: 27 - 37
Published on: Jul 26, 2014
Published by: Warsaw University of Technology
In partnership with: Paradigm Publishing Services
Publication frequency: 2 times per year
Keywords:
Related subjects:
© 2014 Andrzej Fellner, Henryk Jafernik, published by Warsaw University of Technology
This work is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 3.0 License.