References
- Çamlı SB et al. Environmental marine degradation of PLA/ wood composite as an alternative sustainable boat building material. Polish Maritime Research 2024, Vol. 31, No. 1, pp. 127-134. https://doi.org/10.2478/pomr-2024-0013
- Amenabar I et al. Comparison and analysis of non-destructive testing techniques suitable for delamination inspection in wind turbine blades. Compos B 2011, 42 (5), pp. 1298–1305. https://doi.org/10.1016/j.compositesb.2011.01.025
- Tomporowski A et al. Comparison analysis of blade life cycles of land-based and offshore wind power plants. Polish Maritime Research 2018, Vol. 97, pp. 225-233. https://doi.org/10.2478/pomr-2018-0046
- Reddy A et al. Detection of cracks and damage in wind turbine blades using artificial intelligence-based image analytics, Measurement 2019, 147. https://doi.org/10.1016/j.measurement.2019.07.051
- Rizk P et al. Wind turbine blade defect detection using hyperspectral imaging. Remote Sens Appl Soc Environ 2021, 22. https://doi.org/10.1016/j.rsase.2021.100522
- Martinez-Luengo M et al. Structural health monitoring of offshore wind turbines: A review through the statistical pattern recognition paradigm. Renew Sustain Energy Rev 2016, 64, pp. 91–105. https://doi.org/10.1016/j.rser.2016.05.085
- Yang R et al. Progress and trends in nondestructive testing and evaluation for wind turbine composite blade. Renew Sustain Energy Rev 2016, 60, pp. 1225–1250. https://doi.org/10.1016/j.rser.2016.02.026
- Bolotin VV. Delaminations in composite structures: Its origin, buckling, growth and stability. Compos Part B: Eng 1996, Vol. 27 No. 2, pp. 129-145. https://doi.org/10.1016/1359-8368(95)00035-6
- Senthil K, Arockiarajan A, Palaninathan R, Santhosh B, Usha KM. Defects in composite structures: Its effects and prediction methods – A comprehensive review. Composite Structures 2013, Vol. 106, pp. 139-149. https://doi.org/10.1016/j.compstruct.2013.06.008
- Karihaloo BL et al. Buckling-driven delamination growth in composite laminates: Guidelines for assessing the threat posed by interlaminar matrix delamination. Compos Part B: Eng 2008, 39, 2, pp. 386-395. https://doi.org/10.1016/j.compositesb.2007.01.008
- Raharjo WP, Ariawan D, Diharjo K, Raharjo WW, Kusharjanta B. Degradation of plant fiber reinforced polymer composites. Advanced Aspects of Engineering Research 2021, Vol. 5, pp. 65-89. https://doi.org/10.9734/bpi/aaer/v5/8013D
- Junchao T., Renke K., Zhigang D., Zhiqiang L., Dongming G., Yan B.. Multi-scale machining damages of CFRP circular cell honeycomb during end face machining. Journal of Manufacturing Processes 2023, Vol. 86, pp. 282-293. https://doi.org/10.1016/j.jmapro.2023.01.006
- Xu D, Liu PF, Chen ZP et al. Delamination analysis of carbon fiber/epoxy composite laminates under different loading rates using acoustic emission. J Fail Anal 2019, Vol. 19, pp. 1034-1042. https://doi.org/10.1007/s11668-019-00691-1
- Moghaddam BT et al. Structural integrity assessment of floating offshore wind turbine support structures. Ocean Eng 2020, 208, 107487. https://doi.org/10.1016/j.oceaneng.2020.107487
- Akid R. The role of stress-assisted localized corrosion in the development of short fatigue cracks. Effects Environ Initiation Crack Growth 1997, Vol. 1298, pp. 3-17. https://doi.org/10.1520/STP19950S
- Verma A et al. A probabilistic long-term framework for site-specific erosion analysis of wind turbine blades: A case study of 31 Dutch sites. Wind Energy 2021, pp. 1-21. https://doi.org/10.1002/we.2634
- Downey A., Hybrid Dense Sensor Network,. Algorithm for Damage Detection in Wind Turbine Blades using a Hybrid Dense Sensor Network with Feature Level Data Fusion, 01.11.2025. https://home.engineering.iastate.edu/~jdm/wesep594/NerfDowney.pdf
- Soutis C. Fibre reinforced composites in aircraft construction. Progress in Aerospace Sciences 2014, Vol. 41, No. 2, pp. 143–151. https://doi.org/10.1016/j.paerosci.2005.02.004
- Li H, Chen C, Wang T, Wang L. Experimental study of stepped-lap scarf joint repair for spar cap damage of wind turbine blade in service. Appl Sci 2020, Vol. 10, p. 922. https://doi.org/10.3390/app10030922
- Baker A, Dutton S, Composite materials for aircraft structures. AIAA education series. American Institute of Aeronautics and Astronautics, 2005. https://doi.org/10.2514/4.861680
- Poseidon Energy Service, Offshore Wind Turbine Repair, 01.11.2025. http://poseidonenergyservice.com/offshore-wind-turbine-repair/
- Chao H et al. Evaluation of bonded composite patch repair in aircraft structures. Materials Today Communications 2020, Vol. 25, p. 101673. https://doi.org/10.1016/j.mtcomm.2020.101673
- Mishnaevsky Jr. L. How to repair the next generation of wind turbine blades. Energies 2023, Vol. 16, p. 7694. https://doi.org/10.3390/en16237694
- Orsatelli JB et al. Influence of modelling hypotheses on strength assessment of CFRP stepped repairs. International Journal of Adhesion and Adhesives 2024, Vol. 132, 103682. https://doi.org/10.1016/j.ijadhadh.2024.103682
- Psarras S et al. Evaluating the compressive strength of stepped scarf repaired single stiffener composite panels. Journal of Composite Materials 2023, Vol. 57, No. 18, pp. 2887-2898. https://doi:10.1177/0021998323117868
- Yona D et al. A feasibility study of debonding detection in multi-layered marine thin-wall structures using a nondestructive vibration-based approach. Polish Maritime Research 2025, Vol. 32, No. 1, pp. 137-146. https://doi.org/10.2478/pomr-2025-0014
- Pierce RS, Falzon BG. Modelling the size and strength benefits of optimised step/scarf joints and repairs in composite structures. Composites Part B: Engineering 2019, Vol. 173. https://doi.org/10.1016/j.compositesb.2019.107020
- Psarras S, Loutas T, Papanaoum M, Triantopoulos OK, Kostopoulos V. Investigating the effect of stepped scarf repair ratio in repaired CFRP laminates under compressive loading. J Compos Sci 2020, Vol. 4, p. 153. https://doi.org/10.3390/jcs4040153
- Soutis C, Hu FZ. Strength analysis of adhesively bonded repairs. In: Tong L, Soutis C (eds.) Recent advances in structural joints and repairs for composite materials. Springer; 2023. https://doi.org/10.1007/978-94-017-0329-1_5
- Roch E et al. Guided waves in ship structural health monitoring—A feasibility study. Polish Maritime Research 2023, Vol. 30, No. 2, pp. 76-84. https://doi.org/10.2478/pomr-2023-0023
- Johnst P et al. Structural integrity assessment of repurposed wind turbine blade composite components with acoustic emission testing and Ib-value analysis. Composites Part B: Engineering 2025, Vol. 301, p. 112490. https://doi.org/10.1016/j.compositesb.2025.112490
- Mielke A et al. Analysis of damage localization based on acoustic emission data from test of wind turbine blades. Measurement 2024, Vol. 231. https://doi.org/10.1016/j.measurement.2024.114661
- Ding S, Yang C, Zhang S. Acoustic-signal-based damage detection of wind turbine blades—A review. Sensors 2023, Vol. 23, p. 4987. https://doi.org/10.3390/s23114987
- Asokan R, Arumugam V, Santulli C, Stanley AJ. Acoustic emission monitoring of repaired composite laminates. Journal of Reinforced Plastics and Composites 2012, Vol. 31, No. 18, pp. 1226-1235. https://doi.org/10.1177/0731684412455957
- Jefferson A, Arumugam V. Effect of patch hybridization on the compression behavior of patch repaired glass/ epoxy composite laminates using acoustic emission monitoring. Polymer Composites 2016, Vol. 39, No. 6, 2016, pp. 1922-1935. https://doi.org/10.1002/pc.24149
- Roundi W, El Mahi A, El Gharad A, Rebiere JC. Acoustic emission monitoring of damage progression in glass/ epoxy composites during static and fatigue tensile tests. Applied Acoustics 2018, Vol. 132, pp. 124-134. https://doi.org/10.1016/j.apacoust.2017.11.017
- Ji, X.L., Zhou, W., Sun, H., et al.: Damage evolution behavior of bi-adhesive repaired composites under bending load by acoustic emission and micro-CT. Composite Structures, 2022, Vol. 279. https://doi.org/10.1016/j.compstruct.2021.114742
- Panasiuk K, Dudzik K. Determining the stages of deformation and destruction of composite materials in a static tensile test by acoustic emission. Materials 2022, Vol. 15, p. 313. https://doi.org/10.3390/ma15010313
- Panasiuk K, Dudzik K, Hajdukiewicz G. Acoustic emission as a method for analyzing changes and detecting damage in composite materials during loading. Archives of Acoustics 2021, Vol. 46, No. 3, pp. 399-407. https://doi.org/10.24425/aoa.2021.138133
- Samborski S, Rzeczkowski J, Korzec-Strzałka I. Experimental study of delamination process in elastically coupled laminates with the acoustic emission technique. Engineering Structures 2024, Vol. 300, p. 117196. https://doi.org/10.1016/j.engstruct.2023.117196
- Samborski S, Korzec I. Application of the acoustic emission technique for damage identification in the fiber reinforced polymer composites. Advances in Science and Technology Research Journal 2023, Vol. 17, No. 1, pp. 210-221. https://doi.org/10.12913/22998624/156602
- Ineos Composites. Premium marine resins. 01.11.2025. https://www.ineos.com/globalassets/ineos-group/businesses/ineoscomposites/products/pdfs/ame-6001-premium-marine-resins.pdf
- Nouryon. Product Data Sheet. Butanox M50. 01.11.2025. https://www.nouryon.com/globalassets/inriver/resources/pds-butanox-m-50-thermoset-composites-glo-en.pdf
- Kłosiński J. Analysis of the influence of the overlap width on the strength of the bonded joint of GFRP composites using the layer technique. Engineering work, Gdynia Maritime University, Gdynia, 2024.
- Baltazar Kompozyty. Product Data Sheet. Atlac E-Nova MA 6325 https://baltazarkompozyty.pl/component/djcatalog2/?format=raw&task=download&fid=71
- PN-EN ISO 527–4:1997 Plastics—Determination of tensile properties—Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites.
- PN-EN 1330-9:2017-09, Non-destructive testing— Terminology—Part 9: Terms used in acoustic emission.
- PN-EN 13554:2011E, Non-destructive testing—Acoustic emission—General rules.
- Šofer M, Šofer P, Pagáč M, Volodarskaja A, Babiuch M, Gruň F. Acoustic emission signal characterisation of failure mechanisms in CFRP composites using dual-sensor approach and spectral clustering technique. Polymers 2022, Vol. 15, p. 47. https://doi.org/10.3390/polym15010047
- Šofer M, Cienciala J, Šofer P, Paška Z, Fojtík F, Fusek F, Czernek P. Transverse cracking signal characterization in CFRP laminates using modal acoustic emission and digital image correlation techniques. Composites Science and Technology 2024, Vol. 255. https://doi.org/10.1016/j.compscitech.2024.110697