References
- Wong KV, Hernandez A. A Review of Additive Manufacturing. ISRN Mechanical Engineering 2012; 2012:1–10. https://doi.org/10.5402/2012/208760.
- itsikoulis SA, Tekumalla S, Sharma A, Wong WLE, Turkmen S, Liu P. Cavitation Hydrodynamic Performance of 3-D Printed Highly Skewed Stainless Steel Tidal Turbine Rotors. Energies (Basel) 2023; 16. https://doi.org/10.3390/en16093675.
- Horst D, Duvoisin C, Sousa M. Additive Manufacturing at Industry 4.0: a Review. International Journal of Engineering and Technical Research 2018; 8.
- Hajnys J, Pagac M, Mesicek J, Petru J, Spalek F. Research of 316L Metallic Powder for Use in SLM 3D Printing. Advances in Materials Science 2020; 20: 5–15. https://doi.org/10.2478/adms-2020-0001.
- Altunsaray E, Turkmen S, Sözen A, Doğru A, Liu P, Halilbeşe AN, Neser G. On the Hydrodynamic and Structural Performance of Thermoplastic Composite Ship Propellers Produced by Additive Manufacturing Method. J Mar Sci Eng 2024; 12: 2206. https://doi.org/10.3390/jmse12122206.
- Neşer G, Sözen A, Doğru A, Liu P, Altunsaray E, Halilbeşe AN, Türkmen, S.. Improving the Flexibility of Ship Propellers Additively Manufactured from High-Density Polyethylene/Long Carbon Fiber Composites by Prepreg Coating. Polymers (Basel) 2024; 16. https://doi.org/10.3390/polym16091257.
- Harsha Vardhan D, Ramesh A, Chandra B, Reddy M. A Review Of Materials Used For Marine Propellers. Mater Today Proc 2019; 18: 4482–90.
- Eskandarian M, Liu P. A novel maneuverable propeller for improving the maneuverability and propulsive performance of underwater vehicles. Applied Ocean Research 2019; 85: 53–64. https://doi.org/10.1016/j.apor.2019.01.026.
- Banhart J, Seeliger HW. Aluminium foam sandwich panels: Manufacture, metallurgy and applications. Adv Eng Mater 2008; 10: 793–802. https://doi.org/10.1002/adem.200800091.
- Sözen A, Neşer G. A Critical Systematic Scoping Review on the Applications of Additive Manufacturing (AM) in the Marine Industry. Polymers (Basel) 2025; 17. https://doi.org/10.3390/polym17010004.
- Habazaki H, Shimizu K, Skeldon P, Thompson GE, Wood GC, Zhou X. Effects of alloying elements in aluminium anodising. Transactions of the Institute of Metal Finishing 1997; 75: 18–23. https://doi.org/10.1080/00202967.1997.11871137.
- Wang YM, Tian H, Shen XE, Wen L, Ouyang JH, Zhou Y, Jia DC, Guo LX, An elevated temperature infrared emissivity ceramic coating formed on 2024 aluminium alloy by microarc oxidation. Ceram Int 2013; 39: 2869–75. https://doi.org/10.1016/j.ceramint.2012.09.060.
- Romano S, Abel A, Gumpinger J, Brandão AD, Beretta S. Quality control of AlSi10Mg produced by SLM: Metallography versus CT scans for critical defect size assessment. Addit Manuf 2019; 28: 394–405. https://doi.org/10.1016/j.addma.2019.05.017.
- Qian W, Wu S, Wu Z, Ahmed S, Zhang W, Qian G, Withers PJ. In situ X-ray imageing of fatigue crack growth from multiple defects in additively manufactured AlSi10Mg alloy. Int J Fatigue 2022; 155. https://doi.org/10.1016/j.ijfatigue.2021.106616.
- Wang P, Zhou H, Zhang L, Chen H, Zhu X, Lei H, Fang D, In situ X-ray micro-computed tomography study of the damage evolution of prefabricated through-holes in SLM-Printed AlSi10Mg alloy under tension. J Alloys Compd 2020; 821. https://doi.org/10.1016/j.jallcom.2019.153576.
- Pascual A, Ortega N, Plaza S, De Lacalle LNL, Ukar E. Analysis of the influence of L-PBF porosity on the mechanical behaviour of AlSi10Mg by XRCT-based FEM. Journal of Materials Research and Technology 2023; 22: 958–81. https://doi.org/10.1016/j.jmrt.2022.11.172.
- Alhammadi A, Al-Ketan O, Khan KA, Ali M, Rowshan R, Abu Al-Rub RK. Microstructural characterization and thermomechanical behaviour of additively manufactured AlSi10Mg sheet cellular materials. Materials Science and Engineering: A 2020; 791. https://doi.org/10.1016/j.msea.2020.139714.
- Tradowsky U, White J, Ward RM, Read N, Reimers W, Attallah MM. Selective laser melting of AlSi10Mg: Influence of post-processing on the microstructural and tensile properties development. Mater Des 2016;105:212–22. https://doi.org/10.1016/j.matdes.2016.05.066.
- Jian ZM, Qian GA, Paolino DS, Tridello A, Berto F, Hong YS. Crack initiation behaviour and fatigue performance up to very-high-cycle regime of AlSi10Mg fabricated by selective laser melting with two powder sizes. Int J Fatigue 2021; 143. https://doi.org/10.1016/j.ijfatigue.2020.106013.
- Chen H, Wang X, Ren X. Size effect on fatigue performance of SLM-ed AlSi10Mg alloy: Role of defect size distribution. Int J Fatigue 2024; 182. https://doi.org/10.1016/j.ijfatigue.2024.108163.
- Burak Samsul M. Blade Cup Method for Cavitation Reduction in Marine Propellers. Polish Maritime Research 2021; 28: 54–62. https://doi.org/10.2478/pomr-2021-0021.
- Kluczyk M, Grządziela A, Batur T. Design and Operational Diagnostics of Marine Propellers Made of Polymer Materials. Polish Maritime Research 2022; 29: 115–22. https://doi.org/10.2478/pomr-2022-0049.
- Zheng L, Chen S, Chen X, Ji S. Reverse Engineering-Inspired Parametric 3D Geometry Model of Marine Propeller. Polish Maritime Research 2023; 30: 35–47. https://doi.org/10.2478/pomr-2023-0037.
- Zinati A, Ketabdari MJ, Zeraatgar H. Effects of Propeller Fouling on the Hydrodynamic Performance of a Marine Propeller. Polish Maritime Research 2023; 30: 61–73. https://doi.org/10.2478/pomr-2023-0059.
- Grządziela A, Kraskowski M, Król P, Szturomski B, Kiciński R. Experimental Validation of an FEM Model Based on Lifting Theory Applied to Propeller Design Software. Polish Maritime Research 2024; 31: 67–76. https://doi.org/10.2478/pomr-2024-0022.
- Altunsaray E, Turkmen S, Sözen A, Doğru A, Liu P, Halilbeşe AN, Neser G. On the Hydrodynamic and Structural Performance of Thermoplastic Composite Ship Propellers Produced by Additive Manufacturing Method. J Mar Sci Eng 2024; 12. https://doi.org/10.3390/jmse12122206.
- International Organization for Standardization (ISO). Geometrical product specifications (GPS)-geometrical tolerancing-tolerances of form, orientation, location, and run-out 1101. Vol. 1101; 2012.
- American Society for Testing and Materials International (ASTM). Chemical Conversion Coatings on Aluminium and Aluminium Alloys MIL-C-5541; ASTM, 1990.
- American Society for Testing and Materials International (ASTM). Standard Practice for Operating Salt Spray (Fog) Apparatus B117. West Conshohocken, PA: ASTM International; 2011. https://doi.org/10.1520/B0117-11.
- International Organization for Standardization (ISO). Corrosion tests in artificial atmospheres — Salt spray tests 9227; ISO, 2017.
- American Society for Testing and Materials International (ASTM). E1209 Standard Test Method for Fluorescent Liquid Penetrant Examination Using the Water-Washable Process. USA; ASTM, 2017.
- Türkmen, S., Wang, L., Raftopoulos, S., Li, C., and Norman, R. (2023). Analysis of the Hydrodynamic Performance of a Gate Rudder System. In: IOP Conference Series: Materials Science and Engineering, vol. 1288. IOP Publishing, Bristol, UK, 012059. https://doi.org/10.1088/1757-899X/1288/1/012059
- ITTC-Recommended Procedures and Guidelines Testing and Data Analysis Resistance Test; ITTC, Zurich, Switzerland, 2008.
- International Organization for Standardization (ISO). 4287 Geometrical product specification (GPS). Surface texture: Profile method. Terms, definitions, and surface texture parameters; ISO, 2009.
- Shrestha S, Starr T, Chou K. A Study of Keyhole Porosity in Selective Laser Melting: Single-Track Scanning with Micro-CT Analysis. Journal of Manufacturing Science and Engineering, Transactions of the ASME 2019; 141. https://doi.org/10.1115/1.4043622.
- Domfang Ngnekou JN, Nadot Y, Henaff G, Nicolai J, Kan WH, Cairney JM, Ridosz, L, Fatigue properties of AlSi10Mg produced by Additive Layer Manufacturing. Int J Fatigue 2019; 119: 160–72. https://doi.org/10.1016/j.ijfatigue.2018.09.029.